Hand Tools
There are many specialty hand tools used for abrasive blasting solutions, such as vacuum blasting, wire wheel bristle blasting, power blast guns, internal pipe blasting tools and internal pipe painting tools. All these specialty tools are designed for specific applications and solutions.
These specialty hand tools are designed with specific use cases. They are intended for use in cases where conventional blasting methods are either not practical or unsafe.
Some of these tools, such as internal pipe tools or vacuum workheads, modify conventional blasting methods to fit a specific application or scenario (e.g. blasting inside of a pipe, or in a scenario where abrasive recovery is crucial).
Showing 1–15 of 36 results
-
- Each 23mm purchase includes:
- Allen key DIN 911, 5mm, galvanized
- Screw M6 x 20, DIN 6912, galvanized
- Serrated washer 14 x 6.4 x 0.7mm, galvanized
- Each 11mm purchase includes:
- Allen key DIN 911, 5mm, galvanized
- Screw M6 x 12, DIN 6912, galvanized
- Serrated lock-washer 14 x 6.4 x 0.7mm, galvanized
- Refer to Description tab for technical details
- Genuine part – manufactured by MontiPower
-
NEW! Cordless version now available! The Bristle Blaster® Kit is a portable surface preparation tool that combines the ability to produce an abrasive blasted finish with the high mobility and flexibility of a portable hand-held tool.
- Available in Cordless, Electric and Pneumatic models
- The hardened angled bristle wheels works at up to 10x the speed of a wire brush tool
- Portable surface conditioning kit ideal for small areas and ‘touch up’ work
- Can get into tight corners and angles
- Achieves a surface roughness or profile of 40-120 microns with a finish similar to abrasive blasting, using hardened angled bristle wheels
- Genuine MontiPower® product
- **Due to global supply issues, MontiPower® will not be offering carry cases with their tools and kits for the foreseeable future.
-
- Replacement belt for Pneumatic or Electric MBX Bristle Blaster Kits
- Available as Carbon Steel *Most Popular* or Stainless Steel
- Stainless steel belts are primarily used for specialty blasting of stainless steel and aluminum
- Used in conjunction with an accelerator bar to increase the impact speed of the wire to the surface
- MBX bristle blaster are available as 11mm or 23mm wire wheels
-
- Ideal for use on flat surfaces
- Kit includes six 23mm steel belts
- Remove corrosion, coatings, mill scale and additional contaminants while leaving healthy material intact
- Create an anchor profile ranging from 2.5 - 3.3mil on weld seams, edges, bolts and irregular surfaces
- Corroded and pitted surfaces can be returned to near-white metal without grinding or polishing
- Treats 3m2/hr per belt per operator
- Includes anti-vibration handle, safety switch and rope access ability
- Improve the integrity of the treated surface
- Eliminate the need for costly abrasive blast equipment
- Ideal for use on flat surfaces
- Kit includes six 23mm steel belts
- Remove corrosion, coatings, mill scale and additional contaminants while leaving healthy material intact
- Create an anchor profile ranging from 2.5 - 3.3mil on weld seams, edges, bolts and irregular surfaces
- Corroded and pitted surfaces can be returned to near-white metal without grinding or polishing
- Treats 3m2/hr per belt per operator
- Includes anti-vibration handle, safety switch and rope access ability
- Improve the integrity of the treated surface
- Eliminate the need for costly abrasive blast equipment
-
- Highest level of durability and low vibration with steel cut spiral bevel gears
- Increases user productivity
- Offers greater comfort and control with two position side handle
- Enhanced application versatility with keyless guard
- Improved gear durability with low profile jam pot
- Quick and easy wheel removal with quick change wheel release
- Highest level of durability and low vibration with steel cut spiral bevel gears
- Increases user productivity
- Offers greater comfort and control with two position side handle
- Enhanced application versatility with keyless guard
- Improved gear durability with low profile jam pot
- Quick and easy wheel removal with quick change wheel release
-
- Helical bevel gear design
- 5" wheel capacity
- 0.8 HP governed motor
- Ergonomic side handle
- Keyless adjustable protective guard
- Manufacturer part #CP9121BR
- Helical bevel gear design
- 5" wheel capacity
- 0.8 HP governed motor
- Ergonomic side handle
- Keyless adjustable protective guard
- Manufacturer part #CP9121BR
-
- Walk-behind vacuum blasting head
- Will Blast a 4″ wide blast strip – widest of any blast and vac workhead
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 64 ft²/6 m² per hour.
- Compressed air requirement: 500 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Mounted with Wheels, making it easy to maneuver
- Has replaceable rubber lining and brushes.
- Genuine Parts – Manufactured by Pinovo in Norway
- Walk-behind vacuum blasting head
- Will Blast a 4″ wide blast strip – widest of any blast and vac workhead
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 64 ft²/6 m² per hour.
- Compressed air requirement: 500 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Mounted with Wheels, making it easy to maneuver
- Has replaceable rubber lining and brushes.
- Genuine Parts – Manufactured by Pinovo in Norway
-
- The PiPoint is the smallest hand-held vacuum blasting tool.
- Has 8 interchangeable heads providing flexibility for different job requirements.
- Allows you to blast inside a small box web beam, etc.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 6 ft²/0.6 m² per hour.
- Compressed air requirement: 250 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Genuine Parts – Manufactured by Pinovo in Norway
- The PiPoint is the smallest hand-held vacuum blasting tool.
- Has 8 interchangeable heads providing flexibility for different job requirements.
- Allows you to blast inside a small box web beam, etc.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 6 ft²/0.6 m² per hour.
- Compressed air requirement: 250 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Genuine Parts – Manufactured by Pinovo in Norway
-
- A lightweight closed-circuit vacuum blaster with interchangeable heads.
- Edge blasting tools.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 27 ft²/2.5 m² per hour.
- Compressed air requirement: 320 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Genuine Parts - Manufactured by Pinovo in Norway.
- Limited availability in the USA - Request a quote/express interest.
- A lightweight closed-circuit vacuum blaster with interchangeable heads.
- Edge blasting tools.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 27 ft²/2.5 m² per hour.
- Compressed air requirement: 320 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Genuine Parts - Manufactured by Pinovo in Norway.
- Limited availability in the USA - Request a quote/express interest.
-
Ideal for:
- Removing surface rust
- Prep on lashing points
- Grinding weld seams
- Painting preparation
- Removing surface rust
- Ship deck paint removal
-
- #1 Fastest Suction Blast System Available
- Uses an Abrasive Pick-Up Tube and flexible Hose to mix abrasive with the airstream
- To set up, simply slide the pick up tube into your bag of abrasive, connect your compressed air and pull the trigger
- Comes with a fixed orifice ¼' Airjet and ½' Tungsten Carbide nozzle
- Can be used with any media, right out of the bag
- Ideal for where air supply is limited or for small jobs where setting up conventional pressure blast machine is a nuisance
- Uses between 40-120 cfm of air - the more you have, the faster you blast.
- Sold as a Kit including the gun, nozzle and pick up tubes
- Also referred to as a bag blaster
- Genuine Product - Manufactured by Clemco
- #1 Fastest Suction Blast System Available
- Uses an Abrasive Pick-Up Tube and flexible Hose to mix abrasive with the airstream
- To set up, simply slide the pick up tube into your bag of abrasive, connect your compressed air and pull the trigger
- Comes with a fixed orifice ¼' Airjet and ½' Tungsten Carbide nozzle
- Can be used with any media, right out of the bag
- Ideal for where air supply is limited or for small jobs where setting up conventional pressure blast machine is a nuisance
- Uses between 40-120 cfm of air - the more you have, the faster you blast.
- Sold as a Kit including the gun, nozzle and pick up tubes
- Also referred to as a bag blaster
- Genuine Product - Manufactured by Clemco
-
- Scaling hammers are used for Removal of:
- Hard coating
- High Build ups
- Corrosion
- Use with Trelawny TVS Vacuum.
- Available as single head or triple head, lo-vibration or standard.
- Genuine Products - Manufactured by Trelawny
- Scaling hammers are used for Removal of:
-
- Trelawny Needle Scalers for rust, scale and paint removal
- Heavy Duty, High Quality Hand Tools
- Pneumatic Operation
- Preferred option for Low Vibration, someone can work for twice as long with Low Vibration
- Come with a different quantity of needles, the more needles the more work you get done.
- Pistol Grip vs Inline based on where you are working, most contractors use 5:1 Pistol Grip
- Sold Individually
- Genuine Parts - Manufactured by Trelawny
-
- First Low-Vibration Electric Needle Scaler available for paint and rust removal
- For those applications where compressed air is not available
- Lightweight and compact with an ergonomic adjustable side handle
- Uses 19 Chisel tip needles - 7 different needle types available
- 110V 50/60 Hz
- Fully serviceable and can convert to a chisel scaler in seconds (no tools needed)
- Works with a vacuum shroud to ensure you capture any contaminants
- Can survive the harshest environments
- Genuine Products - Manufactured by Trelawny
- First Low-Vibration Electric Needle Scaler available for paint and rust removal
- For those applications where compressed air is not available
- Lightweight and compact with an ergonomic adjustable side handle
- Uses 19 Chisel tip needles - 7 different needle types available
- 110V 50/60 Hz
- Fully serviceable and can convert to a chisel scaler in seconds (no tools needed)
- Works with a vacuum shroud to ensure you capture any contaminants
- Can survive the harshest environments
- Genuine Products - Manufactured by Trelawny
Others—like the suction blasting gun, bristle blaster, or palm sander—are optimal for touch-up work or smaller use cases where a complete blasting set up would either be too cumbersome or impractical.
These tools have their strengths in specific circumstances. But they are also specialty tools—meaning they also have drawbacks in certain scenarios and limited versatility. It’s advisable to consult a technical expert about the job details and constraints before purchasing.