My Account
Blasting Parts & Consumables
Showing 331–345 of 605 results
-
DM222300099- Full repair kit for the 1-¼ (32mm) combo valve.
- Service Kit is used to repair the combo valve when something happens!
- Sold as a full Kit which includes;
- Main Piston Seal
- Plunger Seal
- Complete set of O-Rings
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
DM222300099- Full repair kit for the 1-¼ (32mm) combo valve.
- Service Kit is used to repair the combo valve when something happens!
- Sold as a full Kit which includes;
- Main Piston Seal
- Plunger Seal
- Complete set of O-Rings
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
Part Number Purchase Price DM222300099 $75.19 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$75.19
-
-
BMMBESTOP- Used on the MIST Blaster to enable an Emergency Stop
- Air Directional Control Valve Normally Closed Flow
- Hand Return
- 1/4 NPT
- 53 scfm
- Used for E-Stop
BMMBESTOP- Used on the MIST Blaster to enable an Emergency Stop
- Air Directional Control Valve Normally Closed Flow
- Hand Return
- 1/4 NPT
- 53 scfm
- Used for E-Stop
-
HFGMRHP- Suits Standard Aluminum and Brass Blast Hose Couplings
- High Pressure Version which lasts longer and withstands higher pressures
- Recommended when blasting with pressures over 120psi
- Single Lipped High Pressure Urethane
- 1-¼ (32mm) Bore Size
- Sold as a pack of 10
HFGMRHP- Suits Standard Aluminum and Brass Blast Hose Couplings
- High Pressure Version which lasts longer and withstands higher pressures
- Recommended when blasting with pressures over 120psi
- Single Lipped High Pressure Urethane
- 1-¼ (32mm) Bore Size
- Sold as a pack of 10
-
ASEPPIGWhen the primary air dryer is located at a distance from the blast pot, secondary moisture removal becomes critical. The Sponge-Jet moisture separation tank is ideal for this application. Includes the following:
- Handle for easy portability
- Spud / BOSS blast hose fitting
- Multiple sized ball valves & couplings
Note: Customization is available if specific sizes are needed.
Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website. Contact us for fast, competitive pricing or send in the web form quote request.
ASEPPIGWhen the primary air dryer is located at a distance from the blast pot, secondary moisture removal becomes critical. The Sponge-Jet moisture separation tank is ideal for this application. Includes the following:
- Handle for easy portability
- Spud / BOSS blast hose fitting
- Multiple sized ball valves & couplings
Note: Customization is available if specific sizes are needed.
Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website. Contact us for fast, competitive pricing or send in the web form quote request.
Part Number Purchase Price ASEPPIG Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
HFGMRXP- Suits Mega-Max Aluminum and Brass Blast Hose Couplings
- Single Lipped MRL Rubber
- 1-¾ (45mm) Bore Size
- Have Large Bore for maximum efficiency
- Sold as a pack of 10
HFGMRXP- Suits Mega-Max Aluminum and Brass Blast Hose Couplings
- Single Lipped MRL Rubber
- 1-¾ (45mm) Bore Size
- Have Large Bore for maximum efficiency
- Sold as a pack of 10
-
HFGMRLPThe "Standard Claw and Bore Metal Coupling Gaskets MRL" (SKU: HFGMRLP) is a durable replacement gasket, designed for standard metallic claw couplings. Sold in packs of 10, suitable for systems blasting over 80psi.- 30 Day Money Back Guarantee | Free Returns
- Suits Standard Aluminum and Brass Blast Hose Couplings
- Single Lipped MRL Rubber
- 1-¼ (32mm) Bore Size
- Work great with blasting systems that blast at pressure over 80psi
- Sold as a pack of 10
High Pressure Version is available which lasts longer and withstands higher pressures - HFGMRHP
HFGMRLPThe "Standard Claw and Bore Metal Coupling Gaskets MRL" (SKU: HFGMRLP) is a durable replacement gasket, designed for standard metallic claw couplings. Sold in packs of 10, suitable for systems blasting over 80psi.- 30 Day Money Back Guarantee | Free Returns
- Suits Standard Aluminum and Brass Blast Hose Couplings
- Single Lipped MRL Rubber
- 1-¼ (32mm) Bore Size
- Work great with blasting systems that blast at pressure over 80psi
- Sold as a pack of 10
High Pressure Version is available which lasts longer and withstands higher pressures - HFGMRHP
-
The patented ingenious Bristle Blaster belt design with its angled ends is key to this tools remarkable surface preparation abilities.- They are available in general-purpose Carbon Steel and also in Stainless Steel for stainless or aluminum applications.
- Bristle Blaster belts / wheels are available in 11mm and 23mm widths, and are packaged as follows:
- 11mm in 50 per box
- 23mm in 100 or 180 per case
- Belt life varies depending on conditions, but is typically around 25 minutes.
-
This group includes the following:- 360 degree swivel connection to facilitate ease of use
- 75 and 90 PSI pressure regulators to pair with the 11mm and 23mm hub assemblies
- The replacement radial arm for the axial right-angle Bristle Blaster.
- Easy to install and replace
- Designed specifically for pneumatic MontiPower Bristle Blaster
- Improves the performance and lifespan of your tool
-
HT4431207Revolutionize your surface preparation with Trelawny Stainless Steel Flat Tip Needles, 3mm, SKU: HT4431207. These durable needles are ideal for needle scalers, ensuring precise and effective work.- Crafted from high-quality stainless steel.
- 3mm flat tip design for accuracy and efficiency.
- Box contains 500 robust needles.
- Ideal for a wide range of surface preparation tasks.
HT4431207Revolutionize your surface preparation with Trelawny Stainless Steel Flat Tip Needles, 3mm, SKU: HT4431207. These durable needles are ideal for needle scalers, ensuring precise and effective work.- Crafted from high-quality stainless steel.
- 3mm flat tip design for accuracy and efficiency.
- Box contains 500 robust needles.
- Ideal for a wide range of surface preparation tasks.
-
HT8270428When your Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Cutterhead Removal Pin (827.0428).HT8270428When your Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Cutterhead Removal Pin (827.0428). -
BA703199902- Suit Schmidt Blast Pots
- Warning Decal Kit for small blast pots 0.9-10cuft
- Includes all warning labels
- Ensure your equipment has the legal liability notices clearly present
BA703199902- Suit Schmidt Blast Pots
- Warning Decal Kit for small blast pots 0.9-10cuft
- Includes all warning labels
- Ensure your equipment has the legal liability notices clearly present
Part Number Purchase Price BA703199902 $19.57 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$19.57
-
-
VCBVRA4- #4 Nozzle
- 90 degree
- Tungsten Carbide
- For Right Angle Workhead
VCBVRA4- #4 Nozzle
- 90 degree
- Tungsten Carbide
- For Right Angle Workhead
-
BHMXQADAPTERAdapts MegaMax coupled hoses to standard QC coupled hose.BHMXQADAPTERAdapts MegaMax coupled hoses to standard QC coupled hose.Part Number Purchase Price BHMXQADAPTER $46.19 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$46.19
-
-
BNATC360BOLT- Replacement bolt for the Internal Pipe 360° Blast Nozzle
- Sold - individually
BNATC360BOLT- Replacement bolt for the Internal Pipe 360° Blast Nozzle
- Sold - individually
Part Number Purchase Price BNATC360BOLT $19.76 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$19.76
-
-
BNWB1-US- Water ring creates a dust suppression "curtain" around blast pattern.
- Basic wet blasting option.
- Attach to a standard garden hose, has a flow regulator to give some control over water volume
- Does use a large amount of water. For larger projects, consider using a MistBlaster to reduce cleanup.
- Does not include the nozzle. Will fit the Ultra nozzle, the TVP tungsten carbide nozzle, but does not fit the Hyper nozzle.
BNWB1-US- Water ring creates a dust suppression "curtain" around blast pattern.
- Basic wet blasting option.
- Attach to a standard garden hose, has a flow regulator to give some control over water volume
- Does use a large amount of water. For larger projects, consider using a MistBlaster to reduce cleanup.
- Does not include the nozzle. Will fit the Ultra nozzle, the TVP tungsten carbide nozzle, but does not fit the Hyper nozzle.
>>> Click to SEARCH <<<
If your unable to locate what you need, Contact Us today!
Navigating our extensive inventory is a breeze, thanks to our user-friendly online shop. With an easy-to-search platform, you can quickly find the exact part you’re looking for, be it for a specific valve, machine, or any other component. And if ever you’re unsure about the right part for your equipment, our exceptional customer service team is always on hand to guide you. With a deep understanding of sandblasting equipment, they will help you pinpoint the exact replacement part you need, ensuring minimal downtime and optimized performance.
In short, for all your sandblasting equipment repair part needs, look no further. From a vast selection of OEM parts, easy online shopping, to unmatched customer service support, we’ve got you covered. Ensure the longevity and efficiency of your equipment by choosing the best in the business.
