All Products
Showing 586–600 of 1343 results
-
HLCCT4011
- Replacement flow control regulatory assembly for the RPB® Constant Flow Valve
- Manufacturer part number 4000-11
HLCCT4011- Replacement flow control regulatory assembly for the RPB® Constant Flow Valve
- Manufacturer part number 4000-11
-
HATZ16810
- Safety Lens (16-810)
- Suits RPB Z-Link Respirator
- Anti-fog /anti-scratch to give the wearer long time clear vision
- Suitable for welding / grinding / painting / inspection
- Sold Individually
Genuine Parts - Manufactured by RPB Safety
HATZ16810- Safety Lens (16-810)
- Suits RPB Z-Link Respirator
- Anti-fog /anti-scratch to give the wearer long time clear vision
- Suitable for welding / grinding / painting / inspection
- Sold Individually
Genuine Parts - Manufactured by RPB Safety
-
HANVZ16872
- Suits RPB Z-Link ADF Shield (Auto-Darkening Filter) for welding (16-872)
- Used to protect the filter from damage and wear
- Pack of 10
HANVZ16872- Suits RPB Z-Link ADF Shield (Auto-Darkening Filter) for welding (16-872)
- Used to protect the filter from damage and wear
- Pack of 10
-
- Lenses designed to fit the Bullard GenVX blast helmet
- Often called Blast Shields
- Sold by the Pack
- Three Part Lens system
- Inner Lens - Your thick eye protection layer
- Outer Lens - Protects the more costly inner lens
- Tear-off Lens - Allows you to tear it off and keep blasting
-
APTRI35
- Used to test Breathing Air for certification to Grade D Standard
- Does not include the sample tubes and containers, they are purchased individually as part of the testing and certification cost - See APAIRTESTD
- Also available for Rent - enquire.
APTRI35- Used to test Breathing Air for certification to Grade D Standard
- Does not include the sample tubes and containers, they are purchased individually as part of the testing and certification cost - See APAIRTESTD
- Also available for Rent - enquire.
-
INDCHDTMAG10X
Use for visual assessment of scratch and gouge marks.
INDCHDTMAG10XUse for visual assessment of scratch and gouge marks.
-
The Bullard IsoTherm Cool Vests are a convenient and effective solution for enhancing comfort and safety for workers in hot and humid conditions. By using ‘rechargeable’ cool-packs which are inserted into the front and back of the vest, Bullard has developed a highly portable solution for increasing productivity by increasing operator comfort. Features include:
- Safe:
- The cooling agent within the pack is non-toxic
- Vest constructed of flame-retardant fabric
- High-Viz version available with reflective stripes
- Comfortable:
- Keeps at a constant 55 degrees for hours (depending on environmental conditions)
- Multiple size options with adjustable straps
- No condensation
- Portable & Easy:
- Simply drop the cooling packs into ice or cold water when depleted, and will ‘recharge’ in about 20 minutes.
- Does not require connection to an air hose
Note: Bullard also offers an air-fed cooling vest, which doesn't require recharging, but which requires connection to compressed air.
- Safe:
-
- Suits RPB Nova 2000 Blast Helmet
- Each Cape includes an inner collar and bib
- The Cape and Bib combo is designed to protect the blaster from getting blasting abrasive and dust inside the suit
- Standard Cape is 28" Nylon
- Leather is good for steel grit applications - more durable
- Hibernia Jackets are great if using a air conditioner, it channels the cool air over the blasters torso
- Sold Individually
- Genuine Parts - Manufactured by RPB Safety
-
- Nylon capes (see sizes)
- Suits BLD 88 Series Air Fed Helmets
- Suits BLD Gen VX Helmets
- Designed to protect the operators torso from rebound abrasive
- Works great with blast suits
- Sold Individually
-
GV2410320SPBV
- Tri-Clover Connector with Built in Ball-Valve
- Locate between the metering valve and the bottom of the pot to reduce maintenance time on the metering valve.
- Combines 2 time savers:
- Tri-Clover connection allows for easy removal of metering valve.
- Ball valve allows for removal of metering valve without emptying the pot.
- 1 1/4" x 1 1/4" NPT Threads - suits most blast pots and abrasive metering valves
- Use thread sealant tape or compound to ensure an airtight connection
- NOTE - this option adds 6 inches in height. Ensure that your pot has the required clearance before ordering, or that you can add the needed height to your existing pot.
GV2410320SPBV- Tri-Clover Connector with Built in Ball-Valve
- Locate between the metering valve and the bottom of the pot to reduce maintenance time on the metering valve.
- Combines 2 time savers:
- Tri-Clover connection allows for easy removal of metering valve.
- Ball valve allows for removal of metering valve without emptying the pot.
- 1 1/4" x 1 1/4" NPT Threads - suits most blast pots and abrasive metering valves
- Use thread sealant tape or compound to ensure an airtight connection
- NOTE - this option adds 6 inches in height. Ensure that your pot has the required clearance before ordering, or that you can add the needed height to your existing pot.
-
BAWF8012
- Suits BlastOne MistBlaster Wet/Dry Blasting System
- Used to filter particles out water entering into the pump
- 1/2" FNPT x 1/2" FNPT fittings
- Clear Bowl Strainer Water Filter with Yellow 80 Mesh Filter
- Sold Individually
- Genuine BlastOne Product
BAWF8012- Suits BlastOne MistBlaster Wet/Dry Blasting System
- Used to filter particles out water entering into the pump
- 1/2" FNPT x 1/2" FNPT fittings
- Clear Bowl Strainer Water Filter with Yellow 80 Mesh Filter
- Sold Individually
- Genuine BlastOne Product
-
BA7046003
- Suits Schmidt 3.5 Blast Pot and MistBlaster Secondary Wheel
- 10" Wheel & Tire
- Never Flat, rubber filled tires
- Makes for easy portability onsite
- Sold Individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
BA7046003- Suits Schmidt 3.5 Blast Pot and MistBlaster Secondary Wheel
- 10" Wheel & Tire
- Never Flat, rubber filled tires
- Makes for easy portability onsite
- Sold Individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
-
BABL44100L
- Suits BABL4400 LED Stringer Link-A-Light
- Link-A-Light Stringer Interconnecting Power Cable
- Used to connect individual lights up to each other in a daisy chain fashion, up to 12 in a row, a maximum of 250ft
- 100 ft long cable
- Genuine Parts – Manufactured by Western Technology
BABL44100L- Suits BABL4400 LED Stringer Link-A-Light
- Link-A-Light Stringer Interconnecting Power Cable
- Used to connect individual lights up to each other in a daisy chain fashion, up to 12 in a row, a maximum of 250ft
- 100 ft long cable
- Genuine Parts – Manufactured by Western Technology
-
BABL44100E
- Suits BABL4400 LED Stringer Link-A-Light
- Link-A-Light Stringer Power Cable with plug
- Used to connect the first light to 110v power
- 100 ft long cable
- Genuine Parts – Manufactured by Western Technology
BABL44100E- Suits BABL4400 LED Stringer Link-A-Light
- Link-A-Light Stringer Power Cable with plug
- Used to connect the first light to 110v power
- 100 ft long cable
- Genuine Parts – Manufactured by Western Technology
-
HAZL16901The Vision-Link™ light is compatible with the GVS / RPB T-Link, Z-Link, and Z4 respirators. Features / Specifications include:
- Adjustable LED Lighting - up to 650 lumens
- Easy Installation - no modification is required
- Rechargeable battery
HAZL16901The Vision-Link™ light is compatible with the GVS / RPB T-Link, Z-Link, and Z4 respirators. Features / Specifications include:- Adjustable LED Lighting - up to 650 lumens
- Easy Installation - no modification is required
- Rechargeable battery