Blasting
Showing 946–960 of 965 results
-
HT4461530
- Suits Trelawny Single Head Scaler (HT1965095)
- Genuine part – manufactured by Trelawny
- Full Rebuild Kit
- Sold individually
HT4461530- Suits Trelawny Single Head Scaler (HT1965095)
- Genuine part – manufactured by Trelawny
- Full Rebuild Kit
- Sold individually
-
HT320962
- Suits the Trelawny TFP200 Deck Scaler
- This replacement twisted knot wire brush is heavy duty
- Used for removal of surface rust and feathering of intact coatings
- Sold Individually
- Genuine Parts - Manufactured by Trelawny
HT320962- Suits the Trelawny TFP200 Deck Scaler
- This replacement twisted knot wire brush is heavy duty
- Used for removal of surface rust and feathering of intact coatings
- Sold Individually
- Genuine Parts - Manufactured by Trelawny
-
HT4031328
- Suits Trelawny VL303 ATEX Needle Scalers - Low Vibration HT4463003X
- Manufactured from Spark Resistant Copper Beryllium (CuBe)
- Flat Tip Needle
- Sold as a kit of 28 Needles
- Genuine Parts – manufactured by Trelawny
HT4031328- Suits Trelawny VL303 ATEX Needle Scalers - Low Vibration HT4463003X
- Manufactured from Spark Resistant Copper Beryllium (CuBe)
- Flat Tip Needle
- Sold as a kit of 28 Needles
- Genuine Parts – manufactured by Trelawny
-
HT4462003
- Suits Trelawny VL203 (19 Needle) Low Vibration Electric Pistol Grip Needle Scaler (HT1992003)
- Genuine part – manufactured by Trelawny
- Full Kit - with 19 Needles
- Sold individually
HT4462003- Suits Trelawny VL203 (19 Needle) Low Vibration Electric Pistol Grip Needle Scaler (HT1992003)
- Genuine part – manufactured by Trelawny
- Full Kit - with 19 Needles
- Sold individually
-
HT4463003
- Suits Trelawny VL303 (28 Needle) Low Vibration Electric Pistol Grip Needle Scaler (HT1993003)
- Genuine part – manufactured by Trelawny
- 28 Needles
- Sold individually
HT4463003- Suits Trelawny VL303 (28 Needle) Low Vibration Electric Pistol Grip Needle Scaler (HT1993003)
- Genuine part – manufactured by Trelawny
- 28 Needles
- Sold individually
-
GV2410322
- Standard Collar for Tri-Clover
- Included in the main Tri-Clover Assembly (GV2410320)
- Alternative type to the Tri-Clover version with the spring-loaded collar (GV2410322SP)
GV2410322- Standard Collar for Tri-Clover
- Included in the main Tri-Clover Assembly (GV2410320)
- Alternative type to the Tri-Clover version with the spring-loaded collar (GV2410322SP)
-
GV2410322SP
- Spring-Loaded Collar for Tri-Clover
- Alternative type compared to the standard Tri-Clover Collar without spring-type hinge (GV2410322)
- This is the version that is used on our GV2410320SPBV
GV2410322SP- Spring-Loaded Collar for Tri-Clover
- Alternative type compared to the standard Tri-Clover Collar without spring-type hinge (GV2410322)
- This is the version that is used on our GV2410320SPBV
-
GV2410323
- Replacement FLO Ring Gasket for Tri-Clover
- Included in the main Tri-Clover Assembly (GV2410320)
- Recommended spare part
GV2410323- Replacement FLO Ring Gasket for Tri-Clover
- Included in the main Tri-Clover Assembly (GV2410320)
- Recommended spare part
-
GV2410321
- Standard-length replacement Half-Nipple for Tri-Clover
- Part of main Tri-Clover Assembly (GV2410320 or GV2410320SP) - 2 nipples are required for this assembly
- Recommend replacing the O-ring when replacing these nipples - see part GV2410323
- Longer version also available - see part GV2410321L - NOTE - The longer version is recommended when using the Tri-clover without the Union-End ball valve.
GV2410321- Standard-length replacement Half-Nipple for Tri-Clover
- Part of main Tri-Clover Assembly (GV2410320 or GV2410320SP) - 2 nipples are required for this assembly
- Recommend replacing the O-ring when replacing these nipples - see part GV2410323
- Longer version also available - see part GV2410321L - NOTE - The longer version is recommended when using the Tri-clover without the Union-End ball valve.
-
GV2410320
- Suits most blast pots and valves (any with 1-1/4" NPT Thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance time on the metering valve.
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
GV2410320- Suits most blast pots and valves (any with 1-1/4" NPT Thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance time on the metering valve.
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
-
BABL9610TPD
- Suits BABL9610 BRICK LED Blast Light
- Tripod Mount for Brick LED Blast Light
- Comes with a riser stand that is 22” high
- Sold Individually
- Genuine Part – Manufactured by Western Technology
BABL9610TPD- Suits BABL9610 BRICK LED Blast Light
- Tripod Mount for Brick LED Blast Light
- Comes with a riser stand that is 22” high
- Sold Individually
- Genuine Part – Manufactured by Western Technology
-
- 3-pin Quick connector
- 'TwistLok' action designed to prevent cables from accidentally disconnecting
- Panel mount available DM ECK100
- 3-Pin / 3-Prong Twistlok are most commonly used for deadman cable
- 2-Pin / 3-Prong Twistlok commonly used for Electric Power Supply
- Sold Individually
-
VC201831101
- Suits Vacuload Vacuums and Schmidt Eductor
- Nozzle rated to 350 cfm input air
- Long Lasting, if filter is installed before eductor it will last almost forever
- Sold Individually
VC201831101- Suits Vacuload Vacuums and Schmidt Eductor
- Nozzle rated to 350 cfm input air
- Long Lasting, if filter is installed before eductor it will last almost forever
- Sold Individually
-
DM201150191
- Industrial-Grade Muffler for Manual Blow-Down (Pressure-hold) Blast Pots with Thompson valve or TeraValve
- Safer and much longer lasting than 'throw-away' mufflers
- Reduces blow-down noise to approximately 110 dB
- Intercepts abrasive that may otherwise escape when depressurizing
- Sold as a Field-Installable Retrofit Kit including;
- VBS II Exhaust Muffler
- Mounting Bracket (Goes on blast pot leg)
- Blowdown Hose Assembly
- Ball Valve and required fittings
- Genuine Products - Manufactured by Axxiom Manufacturing/Schmidt
- Also available for Pressure-Release pots here
DM201150191- Industrial-Grade Muffler for Manual Blow-Down (Pressure-hold) Blast Pots with Thompson valve or TeraValve
- Safer and much longer lasting than 'throw-away' mufflers
- Reduces blow-down noise to approximately 110 dB
- Intercepts abrasive that may otherwise escape when depressurizing
- Sold as a Field-Installable Retrofit Kit including;
- VBS II Exhaust Muffler
- Mounting Bracket (Goes on blast pot leg)
- Blowdown Hose Assembly
- Ball Valve and required fittings
- Genuine Products - Manufactured by Axxiom Manufacturing/Schmidt
- Also available for Pressure-Release pots here
-
HLNV3726
- Visor Kit includes hinge and latch (NV3-726)
- Suits RPB Nova3 Blast Helmet
- Used to repair the helmet, the visor most often breaks when blasters
- Try to install too many lenses
- Uses the visor as carrying device
- Sold as a complete kit
HLNV3726- Visor Kit includes hinge and latch (NV3-726)
- Suits RPB Nova3 Blast Helmet
- Used to repair the helmet, the visor most often breaks when blasters
- Try to install too many lenses
- Uses the visor as carrying device
- Sold as a complete kit