Instruments
Showing 106–120 of 148 results
-
- Rods: choose between 5" (13cm) and 20" (50cm)
- Replacement electrode rod thumb screws - sold in packs of 3
- Manufacturer part #'s:
- HHDEXTRODS
- HHDEXTRODL
- HHDTHMBSCR
- Made in the USA
-
Reduce the investment required to convert to PosiTest® HHD equipment by using these adaptors. Makes other brands of brush and spring electrodes compatible with DeFelsko High Voltage Holiday Detectors. (Adaptor not required for SPY electrodes)
- Three adaptors available with MPN's shown, as follows:
- HHDPCWIADPT - PCWI Adaptor
- HHDTRADPT - Tinker & Rasor Adaptor
- HHD266ADPT - 266 and 280 Adaptor
- Three adaptors available with MPN's shown, as follows:
-
INDUSBAC
The DeFelsko® AC Power Kit is the ultimate solution for uninterrupted use of your battery-operated PosiTector® devices. This versatile kit enables continuous operation without reliance on batteries, featuring a USB cable for direct connection to a PC and an AC power adapter for wall outlets. Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS models with serial numbers greater than 864000, it includes a selection of electrical plugs to accommodate various international outlets, ensuring your PosiTector® is always ready for action, whether in the lab, on the production floor, or in the field.
- Designed for uninterrupted use of PosiTector® devices
- Includes USB cable and AC power adapter for versatile power options
- Compatible with a wide range of PosiTector® models
- Selection of electrical plugs for international compatibility
- Ideal for continuous operation without battery dependency
INDUSBACThe DeFelsko® AC Power Kit is the ultimate solution for uninterrupted use of your battery-operated PosiTector® devices. This versatile kit enables continuous operation without reliance on batteries, featuring a USB cable for direct connection to a PC and an AC power adapter for wall outlets. Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS models with serial numbers greater than 864000, it includes a selection of electrical plugs to accommodate various international outlets, ensuring your PosiTector® is always ready for action, whether in the lab, on the production floor, or in the field.
- Designed for uninterrupted use of PosiTector® devices
- Includes USB cable and AC power adapter for versatile power options
- Compatible with a wide range of PosiTector® models
- Selection of electrical plugs for international compatibility
- Ideal for continuous operation without battery dependency
-
INDDPMLFILTER
This 10 pack of filters is specifically designed to maintain the pristine condition of your environmental monitoring device. Ideal for professionals committed to precise and reliable measurements, these filters protect your investment, keeping your device operational in any condition.
- 10 pack of replacement filters designed for the PosiTector® DPM L
INDDPMLFILTERThis 10 pack of filters is specifically designed to maintain the pristine condition of your environmental monitoring device. Ideal for professionals committed to precise and reliable measurements, these filters protect your investment, keeping your device operational in any condition.
- 10 pack of replacement filters designed for the PosiTector® DPM L
-
- Available in 25' or 50' lengths
- Manufacturer part #'s:
- 25' - HHDGND25
- 50' - HHDGND50
-
IN700ADK
- ResinLab EP1 1HT 2-Part Epoxy with additional glue, mixing sticks, palettes and cotton swabs
- Approximate Epoxy Yield*
- 10mm: ~400 dollies
- 14mm: - 200 dollies
- 20mm: - 100 dollies
- 50mm: - 16 dollies
*Actual results will vary based on amount of epoxy used per dolly and waste.
- Manufacturer part# ATADHESIVEKIT
- Made in the USA
IN700ADK- ResinLab EP1 1HT 2-Part Epoxy with additional glue, mixing sticks, palettes and cotton swabs
- Approximate Epoxy Yield*
- 10mm: ~400 dollies
- 14mm: - 200 dollies
- 20mm: - 100 dollies
- 50mm: - 16 dollies
*Actual results will vary based on amount of epoxy used per dolly and waste.
- Manufacturer part# ATADHESIVEKIT
- Made in the USA
-
INDHHDFANBRSH
BlastOne offers all replacement parts for DeFelsko industrial testing equipment on-line for easy ordering, access to instructional material, etc.
This 6" stainless steel fan brush for the PosiTest HHD series is compatible with the original HHD and the HHD C units, and come standard with each new unit. It is available as a replacement part here.
MPN: HHDFANBRSH
INDHHDFANBRSHBlastOne offers all replacement parts for DeFelsko industrial testing equipment on-line for easy ordering, access to instructional material, etc.
This 6" stainless steel fan brush for the PosiTest HHD series is compatible with the original HHD and the HHD C units, and come standard with each new unit. It is available as a replacement part here.
MPN: HHDFANBRSH
-
INDHHDCOUPLER
- For use with the PosiTest HHD
- Attaches to the Spring Connector via thread onto rolling springs
- Manufacturer part# HHDCOUPLER
- Made in the USA
INDHHDCOUPLER- For use with the PosiTest HHD
- Attaches to the Spring Connector via thread onto rolling springs
- Manufacturer part# HHDCOUPLER
- Made in the USA
-
INDCMMEXT
The Telescopic Extender is designed to enhance ease and efficiency. This lightweight device allows for ergonomic moisture measurements on large surfaces without the discomfort of bending or kneeling.
- Lightweight, ergonomic design for comfortable use.
- Length: 18.5 inches (collapsed) and up to 49 inches (extended)
- Secure ¼”-20 threaded mounting point for easy attachment.
- Optimized for use with the PosiTest CMM Concrete Moisture Meter.
- Ideal for quick, large surface moisture evaluations.
INDCMMEXTThe Telescopic Extender is designed to enhance ease and efficiency. This lightweight device allows for ergonomic moisture measurements on large surfaces without the discomfort of bending or kneeling.
- Lightweight, ergonomic design for comfortable use.
- Length: 18.5 inches (collapsed) and up to 49 inches (extended)
- Secure ¼”-20 threaded mounting point for easy attachment.
- Optimized for use with the PosiTest CMM Concrete Moisture Meter.
- Ideal for quick, large surface moisture evaluations.
-
- Purified, ion-free water to be used with the PosiTector SST
- Available in 250ml or 1L bottles
- Manufacturer part#'s SSTDIWATER / SSTDIWATER1L
-
INDHHDWAND
- 1.5m insulated cable, coverts the PosiTest® HHD to a wand-type instrument
- Not for voltages >15kV
INDHHDWAND- 1.5m insulated cable, coverts the PosiTest® HHD to a wand-type instrument
- Not for voltages >15kV
-
Keane-Tator Surface Profile Comparator Grit/Slag, Shot, & Sand/Garnet with Illuminated Magnifier 372
Keane-Tator Surface Profile Comparator Grit/Slag, Shot, & Sand/Garnet with Illuminated Magnifier 372
INDSPCWM- Pocket-size field reference comparator
- Used to estimate surface profile roughness by feel (tactile) and/or sight (visual)
- Each comparator has four or five sectors with a know - and marked - surface profile measurement
- Abrasive-specific comparators for:
- grit profile
- sand profile (KTA only)
- shot profile
- Used in accordance with AS1627-4, AS3894-5 Standards (and for ISO comparator ISO8501-1, 2 Standard also)
- Supplied with protective pouch and instructions
Keane-Tator Surface Profile Comparator Grit/Slag, Shot, & Sand/Garnet with Illuminated Magnifier 372
INDSPCWM- Pocket-size field reference comparator
- Used to estimate surface profile roughness by feel (tactile) and/or sight (visual)
- Each comparator has four or five sectors with a know - and marked - surface profile measurement
- Abrasive-specific comparators for:
- grit profile
- sand profile (KTA only)
- shot profile
- Used in accordance with AS1627-4, AS3894-5 Standards (and for ISO comparator ISO8501-1, 2 Standard also)
- Supplied with protective pouch and instructions
-
ING1114S
- Rotating slide-wheel reference table for use with whirling hygrometers
- Set the pointers to the recorded wet bulb and dry bulb temperature readings and read the dew point temperature
- Calculate the relative humidity %
- Sturdy plastic construction
- Calculation Accuracy ± 1% - compared to Standard Tables
- Includes °C and °F converter
ING1114S- Rotating slide-wheel reference table for use with whirling hygrometers
- Set the pointers to the recorded wet bulb and dry bulb temperature readings and read the dew point temperature
- Calculate the relative humidity %
- Sturdy plastic construction
- Calculation Accuracy ± 1% - compared to Standard Tables
- Includes °C and °F converter
-
ING1116A1
- 30 Day Money Back Guarantee | Free Returns
- Measures dry bulb and wet bulb air temperatures
- Folding handle for compact storage
- Replaceable thermometers
- Measurement range 0°C to +43°C
- Calculated relative humidity accuracy ± 5% RH
- Calculated dewpoint accuracy ± 3°C
ING1116A1- 30 Day Money Back Guarantee | Free Returns
- Measures dry bulb and wet bulb air temperatures
- Folding handle for compact storage
- Replaceable thermometers
- Measurement range 0°C to +43°C
- Calculated relative humidity accuracy ± 5% RH
- Calculated dewpoint accuracy ± 3°C
-
INDPOSIPEN
- Ideal for use on small, hot or hard-to-reach surfaces
- Compact - the size of a ball-point pen
- Rugged - unaffected by mechanical shock, acid, oil, water and dust
- No user adjustment needed
- Wear-resistant probe tip ensures long life and reliable accuracy
- Certificate of calibration showing traceability to PTB included
- Conforms to ASTM D7091/B499, ISO 2808 and others
INDPOSIPEN- Ideal for use on small, hot or hard-to-reach surfaces
- Compact - the size of a ball-point pen
- Rugged - unaffected by mechanical shock, acid, oil, water and dust
- No user adjustment needed
- Wear-resistant probe tip ensures long life and reliable accuracy
- Certificate of calibration showing traceability to PTB included
- Conforms to ASTM D7091/B499, ISO 2808 and others