Blasting Parts & Consumables
Showing 286–300 of 605 results
-
VCBV006
- Suits VCBV100 and BNV-4/6
- Centre Tube Wear Liner
- Wears out instead of the body
- Sold Individually
VCBV006- Suits VCBV100 and BNV-4/6
- Centre Tube Wear Liner
- Wears out instead of the body
- Sold Individually
-
- Must be installed in all blast hose couplings for safety
- Stops the blast hose coupling rotating and disconnecting
- HF-CLP1 is the thin type lock pin (Pack of 25)
- HF-CLP2 is the thick type lock pin (Pack of 25)
- HF-CLP3 is the nylon coupling spring type lock pin (Pack of 10)
- HF-CLP4 is the multi-fit spring type lock pin (Pack of 25)
-
HT1595910
- Pneumatically operated scaling hammer with 11 working pistons
- Ideal for removing tough materials on ship decks before abrasive blasting
- Floating head design to glide across uneven surfaces
- Equipped with 11 Carbide-tipped heads
- Sold as a complete kit, ready to work
- Genuine Products - Manufactured by Trelawny
HT1595910- Pneumatically operated scaling hammer with 11 working pistons
- Ideal for removing tough materials on ship decks before abrasive blasting
- Floating head design to glide across uneven surfaces
- Equipped with 11 Carbide-tipped heads
- Sold as a complete kit, ready to work
- Genuine Products - Manufactured by Trelawny
-
These medium thread nozzles have a longer venturi than the BNAT nozzle series, making them ideal for use in our RotorBlast internal pipe blaster (when blasting pipe 12" in diamater or greater). Available in multiple orifice sizes. When using them in pairs (like when using in the RotorBlast), be sure to calculate your compressor CFM size requirement accordingly.
-
AF230190290
- Keeps Abrasive grit and dust out of the controls of your blast pot
- Helps maintain valve response and speed
- Extends valve seal life
- Must have essential for any blast pot.
- Easy to maintain and clean
- Uses a 90 micron bronze element
- 1/4" inlet fittings
AF230190290- Keeps Abrasive grit and dust out of the controls of your blast pot
- Helps maintain valve response and speed
- Extends valve seal life
- Must have essential for any blast pot.
- Easy to maintain and clean
- Uses a 90 micron bronze element
- 1/4" inlet fittings
-
HTX01018
- The preferred choice for ferrous applications
- Flutes are ground in both directions - right and left hand - increasing operator control and efficient stock removal in harder materials
- Can be used for milling, acute angle milling and narrow contouring in brass, bronze, copper, cast iron, 45-60 Rc steels, carbon steel, nickel chrome steel, stainless steel, steel weldments and titanium
HTX01018- The preferred choice for ferrous applications
- Flutes are ground in both directions - right and left hand - increasing operator control and efficient stock removal in harder materials
- Can be used for milling, acute angle milling and narrow contouring in brass, bronze, copper, cast iron, 45-60 Rc steels, carbon steel, nickel chrome steel, stainless steel, steel weldments and titanium
-
VCBV025
- Suit Blast and Vacuum Workhead VCBV200
- Replacement handle makes it easy for the operator to maneuver
- If using on a vertical surface you will still require 2 operators
- Has convenient rubber grip
- Sold Individually
VCBV025- Suit Blast and Vacuum Workhead VCBV200
- Replacement handle makes it easy for the operator to maneuver
- If using on a vertical surface you will still require 2 operators
- Has convenient rubber grip
- Sold Individually
-
VCBV104
- Suits Blast and Vac Workhead BNV-3/VCBV200 (Standard Unit)
- Nozzle Internal Venturi 1/4" #4 Long Venturi
- Long Lasting
- Sold Individually
VCBV104- Suits Blast and Vac Workhead BNV-3/VCBV200 (Standard Unit)
- Nozzle Internal Venturi 1/4" #4 Long Venturi
- Long Lasting
- Sold Individually
-
BABL3112HCLED
- Suits BABL3475 LED Blast Light
- Blast Light holder (Stanchion) for mounting onto your blast hose
- Install the light directly behind you blast nozzle, to give you blasters proper visibility – no more braille blasting.
- Comes with Hose Clamp
- Sold Individually
- Genuine Part – Manufactured by Western Technology
BABL3112HCLED- Suits BABL3475 LED Blast Light
- Blast Light holder (Stanchion) for mounting onto your blast hose
- Install the light directly behind you blast nozzle, to give you blasters proper visibility – no more braille blasting.
- Comes with Hose Clamp
- Sold Individually
- Genuine Part – Manufactured by Western Technology
-
BABL2106BSPAK
- Suits BABL2106 BRICKette Blast Area Light
- Replacement sacrificial blast lens shields
- Protects the Brickette Light from wear and keeps your light bright
- Sold in packs of 24
- Genuine Part – Manufactured by Western Technology
BABL2106BSPAK- Suits BABL2106 BRICKette Blast Area Light
- Replacement sacrificial blast lens shields
- Protects the Brickette Light from wear and keeps your light bright
- Sold in packs of 24
- Genuine Part – Manufactured by Western Technology
-
RUBVD223015BlastOne has the parts needed to keep your VertiDrive equipment running. This is the ESCON 70/10 Motor Controller CB4.0.RUBVD223015BlastOne has the parts needed to keep your VertiDrive equipment running. This is the ESCON 70/10 Motor Controller CB4.0.
-
RUBVD113531BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Castor Wheel.RUBVD113531BlastOne has the parts needed to keep your VertiDrive equipment running. This is the Castor Wheel.
-
RUBVD322074BlastOne has the parts needed to keep your Vertidrive equipment running. This is the Gearbox 050 with Flange.RUBVD322074BlastOne has the parts needed to keep your Vertidrive equipment running. This is the Gearbox 050 with Flange.
-
VC803300091
BlastOne has the parts needed to for your MiniBRS G2 Trigger Workheads. This is the Vacuum Workhead Trigger Guard (8033-000-91) for both pneumatic and electric versions.
VC803300091BlastOne has the parts needed to for your MiniBRS G2 Trigger Workheads. This is the Vacuum Workhead Trigger Guard (8033-000-91) for both pneumatic and electric versions.
-
RUBVD422007BlastOne has the parts needed to keep your VertiDrive equipment running. This is the recommended spare parts kit for the V400 and includes the following:
- ESCON 70/10 Motor Controller CCB4.0
- V400 WCS with Connector
- Harting Han-Eco Locking Lever (2)
- Gearbox 050 with Flange
- V400 Motor Assembly
- Relay Module
- Carabine Hook (2)
- Lock Pin SS D10-L40 (2)
- Lock Pin SS D12-L70 (2)
- Wearplate (2)
- Spring (6)
- Spring Holder Nut (12)
- Vacuum Pan Skirt
RUBVD422007BlastOne has the parts needed to keep your VertiDrive equipment running. This is the recommended spare parts kit for the V400 and includes the following:- ESCON 70/10 Motor Controller CCB4.0
- V400 WCS with Connector
- Harting Han-Eco Locking Lever (2)
- Gearbox 050 with Flange
- V400 Motor Assembly
- Relay Module
- Carabine Hook (2)
- Lock Pin SS D10-L40 (2)
- Lock Pin SS D12-L70 (2)
- Wearplate (2)
- Spring (6)
- Spring Holder Nut (12)
- Vacuum Pan Skirt
>>> Click to SEARCH <<<
If your unable to locate what you need, Contact Us today!
Navigating our extensive inventory is a breeze, thanks to our user-friendly online shop. With an easy-to-search platform, you can quickly find the exact part you’re looking for, be it for a specific valve, machine, or any other component. And if ever you’re unsure about the right part for your equipment, our exceptional customer service team is always on hand to guide you. With a deep understanding of sandblasting equipment, they will help you pinpoint the exact replacement part you need, ensuring minimal downtime and optimized performance.
In short, for all your sandblasting equipment repair part needs, look no further. From a vast selection of OEM parts, easy online shopping, to unmatched customer service support, we’ve got you covered. Ensure the longevity and efficiency of your equipment by choosing the best in the business.