Blasting Parts & Consumables
Showing 256–270 of 590 results
-
DMRMS1001
-
- Service repair kit includes seals, gaskets, etc. to service both the inlet and the exhaust valve
DMRMS1001-
- Service repair kit includes seals, gaskets, etc. to service both the inlet and the exhaust valve
-
-
BA01989
BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement bottom cap seal for the inlet valve (factory part number 01989).
BA01989BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement bottom cap seal for the inlet valve (factory part number 01989).
-
DMRMCATCS
BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement screen for 1" abrasive trap (factory part number 02012) and it is also included in the applicable service kit available here.
DMRMCATCSBlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement screen for 1" abrasive trap (factory part number 02012) and it is also included in the applicable service kit available here.
-
DMRMS1002
- Optional service repair kit also includes exhaust deflector plate and gasket
DMRMS1002- Optional service repair kit also includes exhaust deflector plate and gasket
-
DM212300799
- Service Kit for the 1-¼ (32mm) and 1-½ (38mm) Auto Air Valve
- Used to rebuild the Auto Air Valve in the field
- Includes Gaskets, Diaphragm, Brass Washers, Breather vent and required lubricants
- Replace seals at the first sign of wear
DM212300799- Service Kit for the 1-¼ (32mm) and 1-½ (38mm) Auto Air Valve
- Used to rebuild the Auto Air Valve in the field
- Includes Gaskets, Diaphragm, Brass Washers, Breather vent and required lubricants
- Replace seals at the first sign of wear
-
DM229100KIT
- Conversion kit for DM2229100 Electric Control Valve
- Installs between twinline and inlet valve
- Provides sharp, clean and rapid deadman response
- Improves safety
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve
DM229100KIT- Conversion kit for DM2229100 Electric Control Valve
- Installs between twinline and inlet valve
- Provides sharp, clean and rapid deadman response
- Improves safety
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve
-
DM212300699
- Service Kit for the 1" (25mm) Auto Air Valve
- Used to rebuild the Auto Air Valve in the field
- Includes Gaskets, Diaphragm, Brass Washers, Breather vent and required lubricants
- Replace seals at the first sign of wear
DM212300699- Service Kit for the 1" (25mm) Auto Air Valve
- Used to rebuild the Auto Air Valve in the field
- Includes Gaskets, Diaphragm, Brass Washers, Breather vent and required lubricants
- Replace seals at the first sign of wear
-
DM212310724
- Replacement Spring for the 1 ¼" and 1 ½" auto air valve
- Used to return the diaphragm back to its closed position
- Sold Individually
DM212310724- Replacement Spring for the 1 ¼" and 1 ½" auto air valve
- Used to return the diaphragm back to its closed position
- Sold Individually
-
DM212310924
- Replacement Spring for the 2” auto air valve
- Used to return the diaphragm back to its closed position
- Sold Individually
DM212310924- Replacement Spring for the 2” auto air valve
- Used to return the diaphragm back to its closed position
- Sold Individually
-
BABL8910BATTERY
- Suits BABL8910 BODYLight
- Run time of 3.5 – 14hrs
- Class 1, Div 1, Auxiliary Battery.
- Rechargeable, Li-Ion (approved for Shipping)
- Has explosion proof outer case with glow-in-the-dark paneling
- Takes approximately 2.5 hrs to fully recharge
- Sold Individually
- Genuine Part – Manufactured by Western Technology
BABL8910BATTERY- Suits BABL8910 BODYLight
- Run time of 3.5 – 14hrs
- Class 1, Div 1, Auxiliary Battery.
- Rechargeable, Li-Ion (approved for Shipping)
- Has explosion proof outer case with glow-in-the-dark paneling
- Takes approximately 2.5 hrs to fully recharge
- Sold Individually
- Genuine Part – Manufactured by Western Technology
-
DMWTX1102
- Replacement ball and chain for Western Tech™ remote control handle
- Operator must use as per instruction manual
- Sold Individually
DMWTX1102- Replacement ball and chain for Western Tech™ remote control handle
- Operator must use as per instruction manual
- Sold Individually
-
HT6065303
- Suits ATEX Trelawny SF11 Scaling Hammer (HT159593)
- Genuine part – manufactured by Trelawney
- Sold individually
HT6065303- Suits ATEX Trelawny SF11 Scaling Hammer (HT159593)
- Genuine part – manufactured by Trelawney
- Sold individually
-
- 2-claw Blast Hose QC Quick couplings
- Available in Brass, Aluminum, Steel and Nylon
- 2 types available - Standard and MegaMax.
- NOTE: MegaMax and Standard couplings require an adapter to fit together
- MegaMax couplings are Full-Flow, designed to remove the air restrictions caused by standard couplings and increases the PSI available to the nozzle. The increased PSI is mostly beneficial when doing high-production blasting using 1.5" or 2" ID Blast Hoses.
- These are unthreaded couplings designed for blast hoses only. Threaded QC fittings are used on the metering valve outlet, and can be found HERE.
- Industry Size Commonly Referred to as Q1, Q-1, Q2, Q-2, Q3, Q-3, Q4, Q-4, Q6, Q-6
-
Nozzle holder for blast hose
- Couples the blast nozzle to the blast hose
- Choose your blast nozzle thread type;
- 3/4" Medium (aka Mitey-Mite) Thread
- 1-1/4" Industrial Fine Thread
- 2" Coarse/Contractor Thread *Contractor Favorite*
- Available in Nylon, Brass or Aluminum
- Click the Documents tab below to view full selection
- Industry Commonly Referred to As: HE1, HE-1, HE2, HE-2, HE3, HE-3, NHP1, NHP2, NHP3, NH1, NH-1, NH2, NH-2, NH3, NH-3
>>> Click to SEARCH <<<
If your unable to locate what you need, Contact Us today!
Navigating our extensive inventory is a breeze, thanks to our user-friendly online shop. With an easy-to-search platform, you can quickly find the exact part you’re looking for, be it for a specific valve, machine, or any other component. And if ever you’re unsure about the right part for your equipment, our exceptional customer service team is always on hand to guide you. With a deep understanding of sandblasting equipment, they will help you pinpoint the exact replacement part you need, ensuring minimal downtime and optimized performance.
In short, for all your sandblasting equipment repair part needs, look no further. From a vast selection of OEM parts, easy online shopping, to unmatched customer service support, we’ve got you covered. Ensure the longevity and efficiency of your equipment by choosing the best in the business.