My Account
All Products
Showing 1–15 of 1343 results
-
HLB88CAThe sturdy nylon strap aids convenient carrying of the Bullard 88VX respirator. Each new unit comes complete with this strap. Replacements available here. MPN: 88CAHLB88CAThe sturdy nylon strap aids convenient carrying of the Bullard 88VX respirator. Each new unit comes complete with this strap. Replacements available here. MPN: 88CA -
HLB88VXRTPWhen your Bullard 88 VX respirator needs rebuilt, this replacement suspension comes with the inner shell (including the air plenum) along with the Flex-Gear® ratchet and poly brow pad.
MPN: 88VXRTP
HLB88VXRTPWhen your Bullard 88 VX respirator needs rebuilt, this replacement suspension comes with the inner shell (including the air plenum) along with the Flex-Gear® ratchet and poly brow pad.
MPN: 88VXRTP
Part Number Purchase Price HLB88VXRTP $38.93 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$38.93
-
-
HLB88VXBAILThe bail is a clip used in the Bullard 88VX latch assembly. Each new unit comes with this bail. Replacements, available here in packs of 10, are also included in the door maintenance kits. (See You May Also Like below.) MPN: 88VXBAILHLB88VXBAILThe bail is a clip used in the Bullard 88VX latch assembly. Each new unit comes with this bail. Replacements, available here in packs of 10, are also included in the door maintenance kits. (See You May Also Like below.) MPN: 88VXBAILPart Number Purchase Price HLB88VXBAIL $37.02 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$37.02
-
-
HLB88VXHPThis hinge pin is used in the Bullard 88VX latch assembly.
Each new unit comes with this pin. Replacement hinge pins, available here in packs of 10, are also included in the door maintenance kits. (See You May Also Like below.)
MPN: 88VXHP
HLB88VXHPThis hinge pin is used in the Bullard 88VX latch assembly.
Each new unit comes with this pin. Replacement hinge pins, available here in packs of 10, are also included in the door maintenance kits. (See You May Also Like below.)
MPN: 88VXHP
Part Number Purchase Price HLB88VXHP $82.78 Bullard Replacement Hinge Pins for 88VX Latch Assembly for (Pack of 10)
Part #HLB88VXHP
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$82.78
-
-
ASEPDOD3When using the Sponge-Jet B-Vac integrated blast system, using a stand-alone cyclonic separator in-line with the vacuum hose is often desireable. This unit can be placed next to the B-Vac and reduces the dust load on the B-Vac dust filter. The Sponge-Jet dropout drum can also be used in any sponge media recovery application. It comes with a 3 inch vacuum hose port and is can be used with a vacuum hose fitted with a cam lock fitting. Vacuum hose, camlock fittings, and vacuum pick-up tools available separately. Note: Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website. Contact us for fast, competitive pricing or send in the web form quote request.ASEPDOD3When using the Sponge-Jet B-Vac integrated blast system, using a stand-alone cyclonic separator in-line with the vacuum hose is often desireable. This unit can be placed next to the B-Vac and reduces the dust load on the B-Vac dust filter. The Sponge-Jet dropout drum can also be used in any sponge media recovery application. It comes with a 3 inch vacuum hose port and is can be used with a vacuum hose fitted with a cam lock fitting. Vacuum hose, camlock fittings, and vacuum pick-up tools available separately. Note: Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website. Contact us for fast, competitive pricing or send in the web form quote request.Part Number Purchase Price ASEPDOD3 Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
ASEPMRHThis Media Recovery Hopper is used in vacuum recovery of sponge media. Vacuum hose and vacuum tools available separately - see You May Also Like below. Note: Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website. Contact us for fast, competitive pricing or send in the web form quote request. This product will be less costly if purchased with the initial blast equipment rather than on it's own.ASEPMRHThis Media Recovery Hopper is used in vacuum recovery of sponge media. Vacuum hose and vacuum tools available separately - see You May Also Like below. Note: Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website. Contact us for fast, competitive pricing or send in the web form quote request. This product will be less costly if purchased with the initial blast equipment rather than on it's own.Part Number Purchase Price ASEPMRH Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
Recycler screens are available in various mesh sizes, allowing optimization of dust removal or media recycles, whatever your application requires. These screens are for the 70 series recyclers. Screens are also available for the 35 series - enquire.
NOTE: Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website. Contact us for fast, competitive pricing or sent your request via our web quote link.
-
Sponge-Jet blast media is unique in the field of abrasive blasting. (See How it Works under the Description tab.) Depending on project requirements, many versions are available as follows (all versions use original sponge carrier unless noted):- Silver Sponge series. Incorporates aluminum oxide abrasive.
- 16 to 320 mesh available, with the most common coating removal versions being Silver 30 or Silver 60.
- A DG (Double Grind) version is offered in the 30 and 60 mesh. This version is pre-processed to function like a working blend immediately, with up to 75% faster blast speed initially compared to original sponge abrasive.
- Red Sponge Media. Incorporates steel grit abrasive.
- Highly aggressive and typically used to remove pack rust and/or pitting.
- White Plastic Sponge Media. Incorporates Type II 30/40 mesh plastic urea.
- Lightly aggressive and used for coating removal without etching / profiling on steel or aluminum.
- White SPOCC Sponge Media. Incorporates Spherical Precipitate of Calcium Carbonate.
- Lightly aggressive and used for contaminant removal.
- White Glass Bead Sponge Media. Incorporates 60/80 mesh glass bead.
- Lightly aggressive, used for soft alloy substrates where a low-build coating system will be used.
- Green Sponge Media. Incorporates Wollastinite cleaning agent.
- Lightly aggressive, used for contaminant removal where moisture is not present.
- HyperX Media. Proprietary blend of aluminum oxide and other medias.
- Available in Medium or Coarse for 2 or 3 mil profile.
- Uses a higher ratio of abrasive-to-sponge, for faster production than even the Double Grind.
- Lower in cost, but not as effective in dust capture and with some ricochet, this media is best suited inside tanks or pipelines where 100% containment is assured.
- Hyper X media requires a specific 3-screen setup using the 70 series recycler (#3, #16, and #50)
- Super Media-1. Incorporates a blend of steel & ceramic abrasives.
- Highly aggressive, used for concrete blasting to expose aggregate, rubber lining removal on steel, lead paint removal in a demolition project, etc.
- When blasting on steel, this product creates such a high profile (8 mil plus) that some of the sponge will embed. If recoating, an additional cleaning process will be required using a steel brush, Bristle Blaster, etc.
- Silver Sponge series. Incorporates aluminum oxide abrasive.
-
Portable Sponge-Jet recyclers are specially designed to reduce abrasive costs and increase sustainability when sponge blasting.
Equipment highlights as follows:
- Size options:
- 35 series - supports up to two 100HP or 170 Series feed units.
- 50 series - supports the B-Vac integrated system. (Rarely used as a stand-alone unit.)
- 70 series - supports up to two 470 Series feed units.
- Screening:
- All units come with 2 screens. The 70 series offers an optional 3rd screen for enhanced recycling control. (The 70 series units pictured here are 2 screen units.)
- Power:
- All units available in either Pneumatic or Electric power.
Additional details under the Description tab.
Note: Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website. Contact us for fast, competitive pricing or send in the web-form quote request.
- Size options:
-
Sponge-Jet offers a robust repair kit for each of their recycler models. Pictured are the kits for the 35 series units (other series kits are similar with the appropriate substitutions). Included items are as follows:- Electric Recycler kits:
- Electric motor
- Flexible coupling
- 4 flat gaskets
- 2 clamps
- Pneumatic Recycler kits:
- Air motor
- Lubricator
- Moisture separator
- Muffler
- Filter
- Flexible coupling
- 4 gaskets
- 2 clamps
- Electric Recycler kits:
-
HLBB4612BlastOne supports Bullard industrial respirators with the consumables and parts required to keep them serviceable. This replacement belt includes the buckle, and is designed for Bullard respirators with cooling tubes.HLBB4612BlastOne supports Bullard industrial respirators with the consumables and parts required to keep them serviceable. This replacement belt includes the buckle, and is designed for Bullard respirators with cooling tubes. -
Thickness standards are used to verify the accuracy and operation of coating thickness gauges. As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration.
DeFelsko offers various solutions for this process and this group of products is their premium version comprised of 4 Certified Coated Metal Plates (one being a zero plate).
Select the Standard set that most closely matches the measuring range of your probe. See selection chart under the Description tab.
-
Thickness standards are used to verify the accuracy and operation of coating thickness gauges. As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration.
DeFelsko offers various solutions for this process and this group of products is their premium version comprised of 4 Certified polystyrene blocks, intended for probes that measure thick coatings (60 mils / 1500 microns and up)
Select the Standard set that most closely matches the measuring range of your probe. See selection chart under the Description tab.
-
Thickness standards are used to verify the accuracy and operation of coating thickness gauges. As a component of ISO 9000 or in-house quality control procedures, they are a practical alternative to sending instruments to DeFelsko for calibration.
DeFelsko offers various solutions for this process and this group of products is their group of metal zero plates, as follows:
- Aluminum. Available in small and medium sizes.
- Steel. Available in small, medium and large sizes.
-
BATL128The Air Tool Lubrication Oil is made to optimize performance, while prolonging the life of air tools, cylinders, and accessories.- Use with in-line lubricators or pour directly into tool reservoir
- Prohibits rust and removes moisture
- Non corrosive, non-reactive, and does not decompose
- #10 weight lubricant
BATL128The Air Tool Lubrication Oil is made to optimize performance, while prolonging the life of air tools, cylinders, and accessories.- Use with in-line lubricators or pour directly into tool reservoir
- Prohibits rust and removes moisture
- Non corrosive, non-reactive, and does not decompose
- #10 weight lubricant
