All Products
Showing 301–315 of 1332 results
-
HT340732
- General use paint sticks and stirrers
- Sold in packs of 1,000
HT340732- General use paint sticks and stirrers
- Sold in packs of 1,000
-
HTYPHA2
- High speed blending of two-pack coatings
- Will result in the highest component consistency
- 3/4" drill chuck
- Suits 5 - 16 gallon mixer
- 1 HP
- Heavy Duty
- 1,000 rpm
HTYPHA2- High speed blending of two-pack coatings
- Will result in the highest component consistency
- 3/4" drill chuck
- Suits 5 - 16 gallon mixer
- 1 HP
- Heavy Duty
- 1,000 rpm
-
DCBPP12A
- Lightweight, portable, high efficiency fan
- 2000 cfm, 12" fan
DCBPP12A- Lightweight, portable, high efficiency fan
- 2000 cfm, 12" fan
-
IPC1099Common wear items for IPC1000 RotorBlast includes the following:
- 30 Leather dust seals IPC1013
- 2 Tube locking rings, IPC1011
- 1 Bearing seal, IPC1012
- 2 Double seal bearings, IPC1009
- 1 Tube casting, IPC1008
- 1 Brake with lining, IPC1007
- 1 Rotating head, IPC1002
- 4 Pipe plugs, IPC1001 (aka FPSP25)
- 2 Tungsten Carbide washers, IPC1014
- 2 Rubber lined nipples, IPC1018
IPC1099Common wear items for IPC1000 RotorBlast includes the following:- 30 Leather dust seals IPC1013
- 2 Tube locking rings, IPC1011
- 1 Bearing seal, IPC1012
- 2 Double seal bearings, IPC1009
- 1 Tube casting, IPC1008
- 1 Brake with lining, IPC1007
- 1 Rotating head, IPC1002
- 4 Pipe plugs, IPC1001 (aka FPSP25)
- 2 Tungsten Carbide washers, IPC1014
- 2 Rubber lined nipples, IPC1018
-
NC4545XXL25For protection against hazardous dusts and particulates, the 3M™ Disposable Protective Coveralls 4545 offer the quality and long-lasting comfort your workers value when working in challenging conditions
- Microporous PE laminate construction for Type 5 and Type 6 protection
- Anti-static treatment reduces static build up
- Reinforced gusset translates to increased durability while bending and squatting
- Knit cuffs provide increased comfort versus elastic closures
- 20 units included in each case
NC4545XXL25For protection against hazardous dusts and particulates, the 3M™ Disposable Protective Coveralls 4545 offer the quality and long-lasting comfort your workers value when working in challenging conditions- Microporous PE laminate construction for Type 5 and Type 6 protection
- Anti-static treatment reduces static build up
- Reinforced gusset translates to increased durability while bending and squatting
- Knit cuffs provide increased comfort versus elastic closures
- 20 units included in each case
-
OPCSH10
- Soft Comfortable Calico fabric Paint hood
- Keeps the dust and overspray out of your hair and neck
- Low cost, disposable design
- Elastic face opening
- Sold as a pack of 10 hoods
OPCSH10- Soft Comfortable Calico fabric Paint hood
- Keeps the dust and overspray out of your hair and neck
- Low cost, disposable design
- Elastic face opening
- Sold as a pack of 10 hoods
-
OPCSS10
- Comfortable elastic stretch fabric designed for Painters and Blasters
- Can be worn three ways (over nose, under nose, under chin)
- Close fitting design, ideal for wearing underneath a blast helmet or spray hood
- Helps keep the blast helmet more hygienic, by capturing body sweat
- Sold as a pack of 10 hoods
- Genuine Products - Manufactured by RPB Safety
OPCSS10- Comfortable elastic stretch fabric designed for Painters and Blasters
- Can be worn three ways (over nose, under nose, under chin)
- Close fitting design, ideal for wearing underneath a blast helmet or spray hood
- Helps keep the blast helmet more hygienic, by capturing body sweat
- Sold as a pack of 10 hoods
- Genuine Products - Manufactured by RPB Safety
-
IPC1008
- IPC1008, RB-6 Replacement tube casting with 1 3/8" thread
- For IPC1000 RotorBlast
- NOTE - this item is also included in Spare Parts Kit, IPC1099
IPC1008- IPC1008, RB-6 Replacement tube casting with 1 3/8" thread
- For IPC1000 RotorBlast
- NOTE - this item is also included in Spare Parts Kit, IPC1099
-
INDHHDPAD
- Use with rolling spring electrodes to precisely locate holidays
- Manufacturer part# HHDPADDLE
- Made in the USA
- Note: Accidental contact with the electrode may result in an electric shock. Use with caution
INDHHDPAD- Use with rolling spring electrodes to precisely locate holidays
- Manufacturer part# HHDPADDLE
- Made in the USA
- Note: Accidental contact with the electrode may result in an electric shock. Use with caution
-
- Rods: choose between 5" (13cm) and 20" (50cm)
- Replacement electrode rod thumb screws - sold in packs of 3
- Manufacturer part #'s:
- HHDEXTRODS
- HHDEXTRODL
- HHDTHMBSCR
- Made in the USA
-
Reduce the investment required to convert to PosiTest® HHD equipment by using these adaptors. Makes other brands of brush and spring electrodes compatible with DeFelsko High Voltage Holiday Detectors. (Adaptor not required for SPY electrodes)
- Three adaptors available with MPN's shown, as follows:
- HHDPCWIADPT - PCWI Adaptor
- HHDTRADPT - Tinker & Rasor Adaptor
- HHD266ADPT - 266 and 280 Adaptor
- Three adaptors available with MPN's shown, as follows:
-
INDUSBAC
The DeFelsko® AC Power Kit is the ultimate solution for uninterrupted use of your battery-operated PosiTector® devices. This versatile kit enables continuous operation without reliance on batteries, featuring a USB cable for direct connection to a PC and an AC power adapter for wall outlets. Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS models with serial numbers greater than 864000, it includes a selection of electrical plugs to accommodate various international outlets, ensuring your PosiTector® is always ready for action, whether in the lab, on the production floor, or in the field.
- Designed for uninterrupted use of PosiTector® devices
- Includes USB cable and AC power adapter for versatile power options
- Compatible with a wide range of PosiTector® models
- Selection of electrical plugs for international compatibility
- Ideal for continuous operation without battery dependency
INDUSBACThe DeFelsko® AC Power Kit is the ultimate solution for uninterrupted use of your battery-operated PosiTector® devices. This versatile kit enables continuous operation without reliance on batteries, featuring a USB cable for direct connection to a PC and an AC power adapter for wall outlets. Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS models with serial numbers greater than 864000, it includes a selection of electrical plugs to accommodate various international outlets, ensuring your PosiTector® is always ready for action, whether in the lab, on the production floor, or in the field.
- Designed for uninterrupted use of PosiTector® devices
- Includes USB cable and AC power adapter for versatile power options
- Compatible with a wide range of PosiTector® models
- Selection of electrical plugs for international compatibility
- Ideal for continuous operation without battery dependency
-
INDDPMLFILTER
This 10 pack of filters is specifically designed to maintain the pristine condition of your environmental monitoring device. Ideal for professionals committed to precise and reliable measurements, these filters protect your investment, keeping your device operational in any condition.
- 10 pack of replacement filters designed for the PosiTector® DPM L
INDDPMLFILTERThis 10 pack of filters is specifically designed to maintain the pristine condition of your environmental monitoring device. Ideal for professionals committed to precise and reliable measurements, these filters protect your investment, keeping your device operational in any condition.
- 10 pack of replacement filters designed for the PosiTector® DPM L