My Account
All Products
Showing 61–75 of 1339 results
-
The PosiTest OTL - DeFelsko's solution to monitor and record temperature profiles in Powder Coating and other industrial ovens. Configurable in various ways, some of it's features include:- Simple Design. With an easy-to-use interface and bright LED's to indicate logger status, operating the Oven Temperature Logger is simple and intuitive.
- Capable. The DeFelsko OTL can:
- Measure & record up to 40,000 datasets in up to 6 batches. Records temperatures every 2 seconds for up to 22 hours.
- 6 ‘Channels’ (K-type thermocouple ports) for adding temperature probes.
- Configurable. Depending on the specific application, the OTL offers various configurations, such as:
- PosiTest OTLKIT, including logger with barrier box and standard Holder (65 minute endurance at 200° C)
- PosiTest OTLKITXT, same as above, except with heat-sink Holder (200 minute endurance at 200° C)
- (See sliding scale endurance chart on the brochure under the Documents tab)
- OTL logger only without barrier box, for use with temperature probes and when the logger does not need to be in the oven.
-
INDLPDREDWIREThis 15' (4.5m) connection wire (for the wand or paint pole), which is included with the LPD accessory pack or the LPD Cabled Wand kit, is also available separately here. MPN: LPEDREDWIREINDLPDREDWIREThis 15' (4.5m) connection wire (for the wand or paint pole), which is included with the LPD accessory pack or the LPD Cabled Wand kit, is also available separately here. MPN: LPEDREDWIREPart Number Purchase Price INDLPDREDWIRE $25.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$25.00
-
-
BlastOne offers all DeFelsko testing instruments and consumables with easy, on-line ordering capability. This product group includes the Li-Ion batteries used in either the PosiTest HHD or the PosiTest HHD C. -
BlastOne offers all accessories and replacement parts for DeFelsko testing equipment. Replacement Caps for Positector® CMM IS measuring probes are available in packs of 4 or 16. The use of these caps is important to ensure the integrity of test results and keep the test monitor protected during testing. -
INDKITPCSCRNBlastOne offers all DeFelsko instruments, accessories, and replacement parts online for easy ordering, resource lookup and more. These replacement probe screens for the PosiTest PC are included with each new unit, and are available here as replacement parts. MPN: KITPCSCRNINDKITPCSCRNBlastOne offers all DeFelsko instruments, accessories, and replacement parts online for easy ordering, resource lookup and more. These replacement probe screens for the PosiTest PC are included with each new unit, and are available here as replacement parts. MPN: KITPCSCRNPart Number Purchase Price INDKITPCSCRN $50.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$50.00
-
-
INDUTGPTRNSDCRRepair - don't replace - your DeFelsko® PRBUTG P (Ultrasonic Thickness Gauge Precision probe) when the transducer fails. Save hundreds! BlastOne carries replacement parts for all DeFelsko products including this replacement transducer.INDUTGPTRNSDCRRepair - don't replace - your DeFelsko® PRBUTG P (Ultrasonic Thickness Gauge Precision probe) when the transducer fails. Save hundreds! BlastOne carries replacement parts for all DeFelsko products including this replacement transducer.Part Number Purchase Price INDUTGPTRNSDCR $435.00 DeFelsko® Replacement Transducer for PRBUTG P – Precision model probe
Part #INDUTGPTRNSDCR
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$435.00
-
-
INDHHDSTRAPThe DeFelsko HHD shoulder strap, which is included in the full HHD kit, is available separately as a replacement item (or as an optional add-on when purchasing the basic HHD kit).INDHHDSTRAPThe DeFelsko HHD shoulder strap, which is included in the full HHD kit, is available separately as a replacement item (or as an optional add-on when purchasing the basic HHD kit).Part Number Purchase Price INDHHDSTRAP $15.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$15.00
-
-
INDRTRPUTTYRecommended best practice when performing replica tape tests is to thoroughly clean the surface before attaching the film to the substrate. This Surface Cleaning Putty is excellent for cleaning steel surfaces of dust and abrasive. One package comes standard with each new PosiTector RTR and additional quantities are available here as needed, in packs of 5.INDRTRPUTTYRecommended best practice when performing replica tape tests is to thoroughly clean the surface before attaching the film to the substrate. This Surface Cleaning Putty is excellent for cleaning steel surfaces of dust and abrasive. One package comes standard with each new PosiTector RTR and additional quantities are available here as needed, in packs of 5.Part Number Purchase Price INDRTRPUTTY $20.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$20.00
-
-
DeFelsko oven temperature probes for use with their OTL system: Extend the reach of the logger with the wide selection of probes as follows:- Applications. Available in both Surface and Air types.
- Mountings. Available in Magnetic, Clamp, and Washer mounts.
- Lengths. Stainless braided cables commonly stocked in 3 lengths, and custom lengths available by special order.
-
INDSTDRTHelp new staff learn the correct way to take tape impressions for measuring surface profile with this Testex training surface. This training tool is precision cut with inverted v-ridges, simulating a 3.1 mil (78 micron) profile. It is recommended for the trainee to take at least 3 readings with X-Coarse Testex tape to provide practice for the amount of pressure needed to obtain accurate readings. This surface training tool is designed for long life, and can be reused over and over again.INDSTDRTHelp new staff learn the correct way to take tape impressions for measuring surface profile with this Testex training surface. This training tool is precision cut with inverted v-ridges, simulating a 3.1 mil (78 micron) profile. It is recommended for the trainee to take at least 3 readings with X-Coarse Testex tape to provide practice for the amount of pressure needed to obtain accurate readings. This surface training tool is designed for long life, and can be reused over and over again. -
INDSSTSWABBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, water from the test must be injected into the probe for salt measurements. These foam swabs are used between measurements to clean the probe and are available in this convenient package of 5 units. MPN: SSTSWABINDSSTSWABBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, water from the test must be injected into the probe for salt measurements. These foam swabs are used between measurements to clean the probe and are available in this convenient package of 5 units. MPN: SSTSWABPart Number Purchase Price INDSSTSWAB $10.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$10.00
-
-
Buying the gear for a new blaster can be time consuming when you forget some of the most common items needed. BlastOne is proud to offer its New Blaster bundle that packages up the most common items a blaster needs to get them going for the first 6 weeks of blasting. Not only will this bundle provide the peace of mind that your blaster is operating in full comfort and safety, but you'll save over $300 otherwise spent ordering these critical items separately! This bundle includes the following:- Nova 3 Blast Helmet with C40 Respirator & standard 28" cape
- 6 weeks worth of Lenses: 10 safety inner and 40 cassette replacement (total 250 lenses)
- 50' Breathing Air hose (connects respirator to filter)
- Premium BlasterAll Blasting Coveralls
- Premium BlasterAll leather blasting gloves with Kevlar protection
- Helmet Carry Bag (Holds your helmet and has handy compartments for spare lenses
- And more!
-
- The Nova 3 Blast Helmet is the industry #1 for operator comfort
- Has comfort padding inside like a motorcycle helmet, which means it distributes the weight evenly, and also turns with your head
- Gives up to 20dB noise attenuation
- NIOSH Safety Approval with a 1000 APF (assigned protection factor)
-
Sold as a complete kit with the following variations:
-
Cape Options:
- Standard Length Nylon Cape
- Extended Nylon Cape
- Standard Leather Cape
- Extended Leather Cape
- XL Blast Jacket
- XXL Blast Jacket
-
Climate Options:
-
Supplied air offers:
- C40 Heating and Cooling
- Cool Air Tube
- Hot Air Tube
- Air Control Valve
-
PAPR offers:
- Air Control Valve only
- (PAPR version is intended for low dust applications such as pot tending, inspection, etc.)
-
Supplied air offers:
-
Cape Options:
- Genuine Products – Manufactured by RPB Safety
-
The Nova 2000 is designed by blasters for blasters. It offers:- Large viewing window for exceptional downward and peripheral vision
- Streamlined air distribution system that prevents lens from fogging by supporting air movement across the breathe zone and over the lens
- Hearing protection with multi-layered sound deadening foam
- Sold as complete kit with the following variations:
- Cape Options:
- Standard Length Nylon Cape
- Extended Nylon Cape
- Climate Options:
- C40 Heating and Cooling
- Cool Air Tube
- Hot Air Tube
- Air Control Valve
- Cape Options:
- Genuine Product - Manufactured by RPB
-
Z-Link® - The most versatile respirator of all! This multi-purpose full face respirator delivers comfortable protection in grinding, welding, foundry, painting and other applications. A few of the features are as follows:- Flip-up Visor. Makes communication with co-workers easy.
- Superior comfort. Comfort-Link® padding system is fully adjustable for total size control.
- Maximum protection with the following ANSI approvals:
- Hard Hat (Z89.1)
- Hearing (S3.19), when used in conjunction with the Quiet-Link™ earmuffs. (See below in Options list.)
- Eye and Face (Z87+)
- Welding Eye (Z87w), when equipped with the Z-Link removable welding visor
- Air control options. Both supplied air and battery-powered PAPR systems are available as follows:
- Constant Flow Valve: Basic supplied-air valve allows control of air volume in the hood, but doesn't provide air cooling
- C40: Premium supplied-air valve allows adjustment of air temperature in the hood for cooling & heating
- HX5: Basic PAPR option with single speed control
- PX5: Premium PAPR option with multiple speeds and a vibratory low-battery alarm making it a preferred choice in high-noise environments.
- NOTE - PAPR units do not require tethering to an air-line (making them very portable) but do not provide air cooling (can't use with C40)
- Note: Z-Link® Headtops are also available without any breathing apparatus.
- Cape / Seal Configurations.
- Zytec FR Chin Seal
- Zytec FR Face Seal
- Zytec FR Shoulder Cape
- Tychem 2000 Face Seal
- Tychem 4000 Shoulder Cape
- Optional Accessories and Other Configurations.
- Z-Link® Flip-up welding visor available separately, or in a package as shown in the product grid below
- Z-Link® Radiant Heat versions for foundry and high-heat applications (shown separately in this link)
- Comms-Link® In-Helmet Communication, utilizes existing 2-way radio systems
- Vision-Link® Rechargeable Light, mounts to respirator helping to illuminate dim work areas
- Quiet-Link™ helmet-mounted ear muffs provides rated hearing protection in noisy environments.
