My Account
Abrasive Metering Valves & Parts
Abrasive Metering Valves
Abrasive Metering Valve Parts
Air Control Valves & Related
Deadman / Control Systems
General Repair Parts for Blast Pots
Internal Pipe (ID) System Components
MistBlaster Specific Parts
Sponge Blast Equipment Parts
Vacuum Blaster Workheads, Parts & Related
VertiDrive Specific Parts
Showing 31–45 of 122 results
-
GV215230715- Replacement direct down base for the 2152-009 Schmidt Jumbo Thompson II Abrasive Metering Valve
- MPN 2152-307-15
GV215230715- Replacement direct down base for the 2152-009 Schmidt Jumbo Thompson II Abrasive Metering Valve
- MPN 2152-307-15
Part Number Purchase Price GV215230715 $584.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$584.00
-
-
- Newest generation abrasive metering valve with improved wear-life while maintaining fine metering control.
- Offers improved life and lower cost over previous generation Thompson valves.
- Pressure-hold design maintains pressure in the pot, even with deadman released. This can save up to 15% of abrasive when your projects involve a lot of start-stop blasting.
- Diaphragm-activated piston requires minimum of 75 psi control pressure
- Can be retrofitted to a blast pot with only 6" clearance
- Genuine Parts - Manufactured by Schmidt® / Axxiom Manufacturing
-
When Axxiom released the Thompson 2 valve, the benefits of Pressure-Hold technology were instantly upgraded by improved user experience over the Thompson I valve. Details as follows:
- Improved servicability:
- Body and cylinder are now 2 parts, providing easier removal of sleeve and plunger.
- Additional Seal protection:
- Has 3 separate seals (versus the original 1), reducing dust migration and improving durability.
- Multiple Sleeve choices:
- In addition to the original Tungsten Carbide and Urethane full-flow options, Axxiom has released additional options that help prevent over-consumption in various applications.
- Virtual Position Indicator:
- Simplifies setting of the media flow rate.
- Cleanout:
- Full 1" port directly under the inlet allows cleanout without removing the valve.
- Size info:
- Standard 1-¼” (32 mm) inlet thread
- 4 choices of MNPT piping for pusher-line connection
- 1", 1-¼", 1-½", and 2"
- Options: Make servicing the valve even more convenient with one of the following:
- Union-End Ball Valve - The UEBV allows removal of valve without emptying the pot.
- Tri-Clover Quick Connect - allows removal of valve without tools.
- Combination UEBV and Tri-Clover - combines the benefits of both options at a reduced cost.
Meter your abrasive efficiently and conveniently with the genuine Axxiom Thompson II valve!
- Improved servicability:
-
- Pressure-release deadman control valve i.e., blast machine depressurizes when the deadman handle is released.
- Used when an overhead hopper automatically feeds abrasive into a blast machine.
- Rugged stainless steel body, compact, isolated 2-bolt construction.
- Doubles blast machine refill cycle time.
- Virtual Position Indicator illustrates orifice size, giving the ability to set abrasive flow quickly and consistently.
- Set and forget – flow rates stay set where you put them.
- High wear, rugged plunger seal.
- Stainless steel body for long life.
- Improved urethane clean-out port enabling quick removal of obstructions while improving port and valve life.
- Fit a rebuild kit while the valve is still fitted to the blast machine.
- Sold individually.
- Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing
-
Enhance your blasting efficiency with the Schmidt® MicroValve Abrasive Metering Valve. Designed for precise abrasive flow, this rugged valve ensures optimal sandblasting media use.
- The MicroValve™ changed the industry by providing accurate metering valve
- Most pressure-release Schmidt pots now use the newer MicroValve® 3
- Simple screw type metering through a low-wearing valve
- 1 ¼" (32 mm) thread abrasive inlet port
- Hardened steel threaded base nipple
- Sold Individually, Brass Coupling not included
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
- The MicroValve™ changed the industry by providing accurate metering valve
-
The Thompson Valve II XL™ showcases Axxiom's continuous improvement process. Adding XL™ technology to the legendary Thompson valve, this premium valve lasts up to 10 times longer than all previous Thompson valves, due to its unique engineering.
- Withstands aggressive medias (like steel grit or aluminum oxide) and high-wear dusty abrasives.
- Will support up to a #12 (3/4") blast nozzle
- Upgraded components and internal wipers to keep the critical areas protected
- Most universal of the Axxiom XL™ series of valves - supports robotic, high-volume blasting
- Sold Individually
- Many choices of sizes and tungsten sleeve configurations, as follows:
- 1" base, std. sleeve. MPN: 2153-006
- 1.25" base, std. sleeve. MPN: 2153-007
- 1.5" base, std. sleeve. MPN: 2153-008
- 1.25" base, slotted sleeve. MPN: 2153-217
- 1.5" base, slotted sleeve. MPN: 2153-218
- 1.25" base, multi-port sleeve. MPN: 2153-437
- 1.5" base, multi-port sleeve. MPN: 2153-438
- (slotted and multi-port sleeves are designed to limit the maximum abrasive flow, saving abrasive when the valve is opened too far.)
-
The Thompson I Valve was invented by Bob Schmidt and was instrumental in causing the popularity of pressure hold technology.
- Pressure-hold systems retain the pressure in the blast pot until the deadman handle is depressed. This reduces abrasive and energy waste.
- The Thompson I offers fine control for abrasive metering
- It comes in 3 nipple size configurations:
- 1 ¼” (32 mm) x 1 ¼” (32 mm)
- 1 ½" (38 mm) x 1 ½" (38 mm)
- 2" (50 mm) x 2" (50 mm)
- Threaded-plunger metering design with air actuated operation
- Fits most sand blast hoppers, blast pots or abrasive blasting machines
- Genuine Parts - Manufactured by Schmidt® / Axxiom Manufacturing
-
GV02427
- The Flat Sand Valve is the classic Clemco abrasive metering valve used for sandblasting for nearly 100 years.
- Used in most new Classic blast machine pots
- The FSV is simple and economical and provides abrasive metering control for expendable mineral abrasives and slags (not recommended for steel grit or aluminum oxide).
- The valve uses a simple lever and keyslot to control the flow of abrasive from the blast pot into the blast hose
- It is good practice to keep a complete spare valve on hand to use when needed, repairing the worn valve at a convenient later time.
- Genuine Clemco Part Number 02427
GV02427- The Flat Sand Valve is the classic Clemco abrasive metering valve used for sandblasting for nearly 100 years.
- Used in most new Classic blast machine pots
- The FSV is simple and economical and provides abrasive metering control for expendable mineral abrasives and slags (not recommended for steel grit or aluminum oxide).
- The valve uses a simple lever and keyslot to control the flow of abrasive from the blast pot into the blast hose
- It is good practice to keep a complete spare valve on hand to use when needed, repairing the worn valve at a convenient later time.
- Genuine Clemco Part Number 02427
-
The Flat Sand Valve is legacy metering technology, where the metering is performed by sliding a lever to open and close the abrasive port. It is simple in design and relatively inexpensive, but has a few limitations. Details as follows:
- Slide-plate metering design, controlled by lever
- 1 1/4" (32 mm) ports
- Features side cleanout-inspection port
- Available with or without outlet nipple and Y-piece (Optional rubber lined nipple is available to extend nipple life.)
- The major limitations are:
- Not recommended for use with metallic abrasives
- The slide plate/lever design does not provide effective fine metering control. Typically this results in over consumption of media. For low-volume blasting using inexpensive media, this may not be an issue.
-
GVDNV100
- HFSTC3 blast coupling included
- Designed for use with coarse metallic abrasives
- Heavy cast iron construction
- Not recommended for use with fine abrasives
- 1 1/2" NPT female thread air connection
- Recommended upgrade: MicroValve 3
GVDNV100- HFSTC3 blast coupling included
- Designed for use with coarse metallic abrasives
- Heavy cast iron construction
- Not recommended for use with fine abrasives
- 1 1/2" NPT female thread air connection
- Recommended upgrade: MicroValve 3
-
GV2410320
- Suits most blast pots and valves (any with 1-1/4" NPT Thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance time on the metering valve.
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
GV2410320- Suits most blast pots and valves (any with 1-1/4" NPT Thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance time on the metering valve.
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
Part Number Purchase Price GV2410320 $195.00 Tri-Clover 1-1/4″ Sanitary Quick Connector Assembly without spring-loaded collar
Part #GV2410320
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$195.00
-
-
GV2410320SP
- Suits most blast pots and valves (any with 1-1/4" NPT thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance on the metering valve
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball Valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
- Alternate version to Tri-clover assembly without spring-loaded hinge
GV2410320SP- Suits most blast pots and valves (any with 1-1/4" NPT thread)
- Locate between the metering valve and the bottom of the pot to reduce maintenance on the metering valve
- Allows easy removal of metering valve from pot
- Can be used independently, or in conjunction with a Union End Ball Valve. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
- Alternate version to Tri-clover assembly without spring-loaded hinge
Part Number Purchase Price GV2410320SP $195.00 Tri-Clover Sanitary Quick Connector Assembly with spring-loaded collar
Part #GV2410320SP
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$195.00
-
-
GVFSV1022Heavy-duty pipe fitting connects flat sand valve to pusher line, blast hose line, and blast pot nipple. Specifications:
- 150# malleable iron wye
- 1-¼" x 1-¼" x 1-¼" standard NPT female threads
GVFSV1022Heavy-duty pipe fitting connects flat sand valve to pusher line, blast hose line, and blast pot nipple. Specifications:- 150# malleable iron wye
- 1-¼" x 1-¼" x 1-¼" standard NPT female threads
-
GV214950006
- OEM Replacement Plunger Seal for Large Bore Thompson I, Thompson II, MicroValve II, and MicroValve III valves
- Schmidt / Axxiom part # 2149-500-06
- Note - this product is replacing the purple GV215200006 seal
- Note - this product is also included in the relevant seal kits
GV214950006- OEM Replacement Plunger Seal for Large Bore Thompson I, Thompson II, MicroValve II, and MicroValve III valves
- Schmidt / Axxiom part # 2149-500-06
- Note - this product is replacing the purple GV215200006 seal
- Note - this product is also included in the relevant seal kits
Part Number Purchase Price GV214950006 $13.80 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$13.80
-
-
- Multi-purpose inline ball valves
- Plated brass corrosion-resistant body
- Full bore design for maximum airflow
- Rated for use up to 600 psi
- Female NPT threaded ports
- Sold individually
