My Account
Blasting, UHP & Site Equipment
Blast Equipment
Blast Nozzles
Blast Equipment Parts
Blast / Air Hose & Couplings
Portable Lighting
Air Dryers
Ventilation & Other Field Equipment
UHP & Pressure Washing Equipment
Showing 361–375 of 637 results
-
The 4-Claw Fittings (aka Crowsfoot Couplings) provides a reliable and quick connection for MegaFlow Bull / Air Hoses in industrial applications. Built from plated steel, this coupling is rated for 150 psi and is designed for use with claw bolt clamps and HFCLP2 lock pins for enhanced safety. Each fitting is supplied with a rubber gasket. Quantity discounts available.
Key Product Features:
- 4-Claw (Crowsfoot) coupling for quick connections between bull hoses and equipment.
- Rated for 150 psi; not intended for steam use.
- Compatible with 1-1/4" through 2" ID bull hoses.
- Requires HFCLP2 lock pins and whipchecks to ensure secure connections.
- Durable steel construction for high-pressure industrial use.
- Replacement 4-claw gaskets and quantity discounts available.
-
- Heavy Duty Spud fitting assembly for MegaFlow Bull Air Hose
- Includes Hose Tail (aka Boss® Ground Joint Stem) and Boss® Wing Nut. A hammer is used on the wing nut to tighten it.
- Rugged plated steel construction
- Recommended by BlastOne as the preferred Bull hose fitting – safer than 4-claw
- Gasket-less, low maintenance design. No lock-pins required.
- Safety requires bull hose bolt clamps to secure to the air hose by a special installation procedure
- Sold Individually with quantity discounts available
- Genuine Parts – manufactured by Dixon
-
- Heavy Duty Spud Fittings for MegaFlow Bull / Air Hose to connect bull hose to equipment, or to connect two bull hoses
- Also known as Boss® Ground Joint Fittings, this selection is made of heavy plated Iron
- Recommended by BlastOne as the preferred Bull hose fitting as they are inherently safer than 4-claw fittings
- Sold Individually with Mix/Match quantity discounts available
- Genuine Parts - Manufactured by Dixon
-
- 30 Day Money Back Guarantee | Free Returns
- Industry standard coupling for use with air supply hose
- Rugged steel construction
- Quarter-turn quick action connector
- Supplied with 3/4" I.D. bore gaskets fitted
- Use HF CLP-1 or HF CLP-2 Lock Pin - (not included)
- Available with hose tail, male threads, or female threads
- Sold individually
-
These galvanized pipe fittings, known as reducing bushings, hex bushings or reducer bushings, are NPT threaded and are used to connect pipes of different sizes.
- Galvanized malleable iron for strength and corrosion resistance
- Hex body for easy wrench tightening
- NPT threads for a tight, reliable seal
- Available in many male-to-female size combinations
- Stainless steel and other options available on request
-
MOBILE DUST COLLECTOR, AIR SCRUBBERS & PORTABLE DUST EXTRACTORS
- Ready availability all over the US
- Diesel powered
- Trailer mounted or skid mounted
- Industry leading design
- All sizes available
- Read our Dust Collector Buying Guide
- Portable dust extractor for site work
- Onsite dust collectors and onsite dust ventilation
- Industrial portable dust collectors
-
AVAILABLE FOR RENTAL OR PURCHASE
- Comes in 25 foot lengths
- Built with Heavy Duty Nylon with Extra Wear Strips
- Tough coated membrane wrapping
- Spiral reinforcing ribs for suction applications to ensure the Ducting doesn't collapse
- Collapses down for compact transportation and storage
- Can be used under negative or positive pressure
- Rated for temperatures from -20 to 180 degrees F
- Meets NFPA701 Method 2 Specs for Flame Resistance
-
- Modular, portable ventilating fans, available in a variety of sizes
- Electric, Pneumatic, and Hazardous Electric models available
- Set-up as a stand-alone or ducted unit.
- See attached document for CFM ratings
- NOTE - Dust Socks cannot be used on electric Black Max fans larger than 16". Using a 20 or 24" electric unit with a dust sock voids the warranty.
- DUST SOCK - Sold Separately - NOTE - see limitation above
- DUCT ADAPTER - Sold Separately
-
VCBV006
- Suits VCBV100 and BNV-4/6
- Centre Tube Wear Liner
- Wears out instead of the body
- Sold Individually
VCBV006- Suits VCBV100 and BNV-4/6
- Centre Tube Wear Liner
- Wears out instead of the body
- Sold Individually
-
The Clemco SGT Air Jets are high-quality replacement components designed to optimize the performance of your SG-300 Suction Gun. Available in multiple sizes, these air jets ensure maximum efficiency by matching the available air supply to the blasting requirements. Key Features:
- These specially designed Clemco Suction Gun SG300 Air Jets are available in four orifice sizes:
- 1/16" orifice, MPN: 02659
- 1/8" orifice (standard), MPN: 02660
- 3/16" orifice, MPN: 02661
- 1/4" orifice, MPN: 02662
- Helps the SG-300 Suction Gun achieve optimal performance by matching air supply to application needs.
- Durable construction for long-lasting use in abrasive blasting environments.
- Genuine Clemco replacement part ensures compatibility and reliable performance.
- These specially designed Clemco Suction Gun SG300 Air Jets are available in four orifice sizes:
-
CAPSG02641Designed for abrasive blasting applications with limited air supply, the Suction Blaster is intended for small projects / touch-up work, etc. This complete setup (compressor and abrasive not included) can blast with as little as 12 cfm, using the included #5 nozzle and 1/8" air jet. The package includes the following:
- Light-duty, portable hopper with top screen
- SG-300 blast gun with #5 nozzle and 1/8" air jet
- 10' air hose, 1/2" ID
- 10' blast hose, 1/2" ID
- Package as shown MPN: 02641
CAPSG02641Designed for abrasive blasting applications with limited air supply, the Suction Blaster is intended for small projects / touch-up work, etc. This complete setup (compressor and abrasive not included) can blast with as little as 12 cfm, using the included #5 nozzle and 1/8" air jet. The package includes the following:- Light-duty, portable hopper with top screen
- SG-300 blast gun with #5 nozzle and 1/8" air jet
- 10' air hose, 1/2" ID
- 10' blast hose, 1/2" ID
- Package as shown MPN: 02641
Part Number Purchase Price CAPSG02641 $845.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$845.00
-
-
The Clemco Power Suction Gun Packages provide a compact, lightweight suction blasting solution for dry abrasive blasting. Ideal for small jobs or locations where conventional pressure blast setups are inconvenient. Primary Benefits:
- Simple design. No valves, no pressure pots.
- Easy to use. Simply place the suction lance into a bag of abrasive (or into the optional 3cf hopper) to use.
- Highly portable. With an empty weight of 50 pounds including the air / material hose and hopper / cart, the PowerGun package is extremely mobile.
- Power Suction Gun (only), MPN: 100477
- Gun with 16 ft. air/material hoses, MPN: 90253
- Gun with 30 ft. air/material hoses, MPN: 24688
- Gun w/hopper, cart, and 16 ft hoses, MPN: 99860
- Gun w/hopper, cart, and 30 ft hoses, MPN: 24687
- Hopper (3cf) & cart assembly (no gun or hoses), MPN: 99899
-
These medium thread nozzles have a longer venturi than the BNAT nozzle series, making them ideal for use in our RotorBlast internal pipe blaster (when blasting pipe 12" in diamater or greater). Available in multiple orifice sizes. When using them in pairs (like when using in the RotorBlast), be sure to calculate your compressor CFM size requirement accordingly.
-
AF230190290
- Keeps Abrasive grit and dust out of the controls of your blast pot
- Helps maintain valve response and speed
- Extends valve seal life
- Must have essential for any blast pot.
- Easy to maintain and clean
- Uses a 90 micron bronze element
- 1/4" inlet fittings
AF230190290- Keeps Abrasive grit and dust out of the controls of your blast pot
- Helps maintain valve response and speed
- Extends valve seal life
- Must have essential for any blast pot.
- Easy to maintain and clean
- Uses a 90 micron bronze element
- 1/4" inlet fittings
Part Number Purchase Price AF230190290 $129.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$129.00
-
-
VCBV025
- Suit Blast and Vacuum Workhead VCBV200
- Replacement handle makes it easy for the operator to maneuver
- If using on a vertical surface you will still require 2 operators
- Has convenient rubber grip
- Sold Individually
VCBV025- Suit Blast and Vacuum Workhead VCBV200
- Replacement handle makes it easy for the operator to maneuver
- If using on a vertical surface you will still require 2 operators
- Has convenient rubber grip
- Sold Individually
Our Blasting & UHP Site Equipment category offers everything you need for efficient and effective surface preparation. For abrasive blasting, we supply a variety of blasting pots, nozzles, and blast hoses that ensure consistent media flow and superior performance. If you’re working with ultra-high-pressure water blasting, our UHP pumps and water jetting accessories are engineered for maximum power and precision, making them ideal for removing coatings, rust, and other heavy contaminants. Whether you’re tackling a large industrial project or a specialized cleaning job, our equipment is designed to meet the highest standards of safety and efficiency. Need assistance? Our team is here to provide expert guidance on selecting the best tools for your needs.