Blasting Parts & Consumables
Showing 346–360 of 605 results
-
BADPG30010
- Suits Vacuload 1 Vacuum Abrasive Recovery
- Differential Pressure Gage tells you when your filter is blocked
- Allows simple diagnosis of filter changes
- 1/4" NPT Thread
- MAX 300psig
- Sold Individually
BADPG30010- Suits Vacuload 1 Vacuum Abrasive Recovery
- Differential Pressure Gage tells you when your filter is blocked
- Allows simple diagnosis of filter changes
- 1/4" NPT Thread
- MAX 300psig
- Sold Individually
-
BABL8910DD
- Suits BABL8910 BODYLight
- Body Light Dome Diffuser Accessory
- Used to spread the light over a larger area
- Sold Individually
- Genuine Part – Manufactured by Western Technology
BABL8910DD- Suits BABL8910 BODYLight
- Body Light Dome Diffuser Accessory
- Used to spread the light over a larger area
- Sold Individually
- Genuine Part – Manufactured by Western Technology
-
- Use with 1/2" to 1-1/2" nut & tail hose couplings
- General purpose double bolt hose clamps
- Two bolt, split-collar clamp without claw
- Sold individually
-
BADSEAL125
- Suits BlastOne Vacuload 1 Drum lid
- Used to seal the drum lid to the 55 gallon drum to maintain a good vacuum seal
- 1 1/4" x 1 1/8" D Gasket, with 3M Tape for easy adhesion
- Vacuload 1 Drum requires 8ft of the D-Seal
- Sold by the foot
BADSEAL125- Suits BlastOne Vacuload 1 Drum lid
- Used to seal the drum lid to the 55 gallon drum to maintain a good vacuum seal
- 1 1/4" x 1 1/8" D Gasket, with 3M Tape for easy adhesion
- Vacuload 1 Drum requires 8ft of the D-Seal
- Sold by the foot
-
DCDC20E
- Suits 20" Flexible Dust Collector Ducting
- Duct Clamp is used to quickly join Ducts to the Dust Collector or a duct joining ring
- Quick action type
- Sold Individually
DCDC20E- Suits 20" Flexible Dust Collector Ducting
- Duct Clamp is used to quickly join Ducts to the Dust Collector or a duct joining ring
- Quick action type
- Sold Individually
-
BlastOne offers a selection of popular replacement Filter Cartridges for most dust collectors. Additional details as follows:
- Suits Mobile Dust Collector Units, Blast Room Dust Collectors and Cabinet Dust Collectors
- Multiple media types available
- 80/20 cellulose/poly. (aka Cellulex®). General purpose application. Merv 10 rated.
- 80/20 treated cellulose/poly. (aka Endura-Tek™). General purpose filtration with increased resistance to moist air. Merv 10.
- Nano. (aka UltraWeb). Used when extra filtration efficiency is required - often in hazardous dust applications such as lead or asbestos. Also offers longer life and lower energy requirements. Merv 15.
- Spunbond UltraWeb. Similar to standard Nano with increased resistance to moist air. Merv 15.
- All are available in standard or FR rating. (Call or chat for pricing on FR versions)
Many more cartridge filter types available - see cross reference chart under the Documents tab. If you don't see what you need, chat or call 1-800-999-1881 with your questions.
Note: Brand of product may vary.
-
VCBV023
- Suits VCBV200 Blast and Vac Workhead
- Blast and Vacuum Central Wear Liner
- Used to prevent premature wear to the workhead
- Sold Individually
VCBV023- Suits VCBV200 Blast and Vac Workhead
- Blast and Vacuum Central Wear Liner
- Used to prevent premature wear to the workhead
- Sold Individually
-
DM2013402
- Replacement part for the Control Line Pilot Valve
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve.
- Provides sharp, clean and rapid deadman response.
DM2013402- Replacement part for the Control Line Pilot Valve
- Reduces wear on both the remote control exhaust valve and the abrasive metering valve.
- Provides sharp, clean and rapid deadman response.
-
DM222910099
- Suits Electric Blast Pot Control Valve DM2229100
- Service Kit is used to keep your blast pot operational
- Sold as a Kit containing;
- Piston
- Spring
- Replacement O-rings
- Face Seal
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
DM222910099- Suits Electric Blast Pot Control Valve DM2229100
- Service Kit is used to keep your blast pot operational
- Sold as a Kit containing;
- Piston
- Spring
- Replacement O-rings
- Face Seal
- Genuine Parts - Manufactured by Schmidt / Axxiom Manufacturing
-
DM226340420BlastOne has the parts needed for your MiniBRS G2 Trigger Workheads. This is the Electric Trigger Module Assembly (2263-404-20). A Pneumatic G2 Trigger Deadman control module is also available.DM226340420BlastOne has the parts needed for your MiniBRS G2 Trigger Workheads. This is the Electric Trigger Module Assembly (2263-404-20). A Pneumatic G2 Trigger Deadman control module is also available.
-
CHENVIROPREPP
- Liquid surface pre-treatment used in lead-based coating removal projects
- Mil thickness required depends on lead level in the coating to be removed.
- When properly applied, the waste media will pass the Lead TCLP test, allowing disposal as non-hazardous waste
- 5 gallons per pail (sold by the pail)
- Full skid quantity is 36 pails (180 gallons)
CHENVIROPREPP- Liquid surface pre-treatment used in lead-based coating removal projects
- Mil thickness required depends on lead level in the coating to be removed.
- When properly applied, the waste media will pass the Lead TCLP test, allowing disposal as non-hazardous waste
- 5 gallons per pail (sold by the pail)
- Full skid quantity is 36 pails (180 gallons)
-
HT6693175
- Suits Trelawny TFP 200 Electric Scaler (HT3202004T)
- Genuine part – manufactured by Trelawny
- Extension Cord
- Sold individually
HT6693175- Suits Trelawny TFP 200 Electric Scaler (HT3202004T)
- Genuine part – manufactured by Trelawny
- Extension Cord
- Sold individually
-
HLNV2004Visor Kit for RPB Nova 2000 (SKU: HLNV2004) includes latch with screws and the face frame to ensure the continued protection of your blast helmet.
- Suits RPB Nova 2000 Blast Helmet
- Common breakage is because the blaster carries the helmet by the face frame instead of the hand strap provided
- Sold as a Kit including;
- Complete Latch with screws
- Genuine Parts - Manufactured by RPB Safety
HLNV2004Visor Kit for RPB Nova 2000 (SKU: HLNV2004) includes latch with screws and the face frame to ensure the continued protection of your blast helmet.- Suits RPB Nova 2000 Blast Helmet
- Common breakage is because the blaster carries the helmet by the face frame instead of the hand strap provided
- Sold as a Kit including;
- Complete Latch with screws
- Genuine Parts - Manufactured by RPB Safety
-
VCBV201
- Suit Blast and Vac Workhead VCBV200
- Fine Thread Nozzle Holder
- Connects Blast hose to the nozzle and the workhead.
- You can not use the Workhead without this
- Sold Individually
VCBV201- Suit Blast and Vac Workhead VCBV200
- Fine Thread Nozzle Holder
- Connects Blast hose to the nozzle and the workhead.
- You can not use the Workhead without this
- Sold Individually
>>> Click to SEARCH <<<
If your unable to locate what you need, Contact Us today!
Navigating our extensive inventory is a breeze, thanks to our user-friendly online shop. With an easy-to-search platform, you can quickly find the exact part you’re looking for, be it for a specific valve, machine, or any other component. And if ever you’re unsure about the right part for your equipment, our exceptional customer service team is always on hand to guide you. With a deep understanding of sandblasting equipment, they will help you pinpoint the exact replacement part you need, ensuring minimal downtime and optimized performance.
In short, for all your sandblasting equipment repair part needs, look no further. From a vast selection of OEM parts, easy online shopping, to unmatched customer service support, we’ve got you covered. Ensure the longevity and efficiency of your equipment by choosing the best in the business.