Blasting Parts & Consumables
Showing 106–120 of 587 results
-
The Air Pressure Gage is a crucial tool for monitoring air pressure in your blast equipment, ensuring optimal performance and safety. This general-purpose gage is sold individually and designed not to exceed the manufacturer's recommendation. Secure your blasting operations with this reliable Air Pressure Gage for precise and consistent air pressure tracking.
- General purpose air pressure gages for monitoring of air pressure
- Do not exceed manufacturers recommendation for blast equipment
- Sold Individually
-
-
AFREG06G
- Used for reduced-pressure blasting of delicate surfaces such as car panels, stone facades, etc.
- Not recommended for normal production blasting due to inherent flow restrictions. Regulator should be disconnected or by-passed for full pressure blasting
AFREG06G- Used for reduced-pressure blasting of delicate surfaces such as car panels, stone facades, etc.
- Not recommended for normal production blasting due to inherent flow restrictions. Regulator should be disconnected or by-passed for full pressure blasting
-
BA50785K273High-pressure brass pipe fitting for use with:
- NPT female threads: Air, Water, BSP and metric threads: air, natural gas, oil, water
BA50785K273High-pressure brass pipe fitting for use with:- NPT female threads: Air, Water, BSP and metric threads: air, natural gas, oil, water
-
The Breather Vent is an essential component designed to prevent dust from entering the piston/cylinder top of the Thompson Valve II Metering Valve. Available in 1/8'' NPT or 1/4" NPT, this bronze silencer, brass strainer, and breather vent serves as an alternative replacement to Schmidt® 2152-000-17, or GV215200017. Sold individually, this Breather Vent ensures your system's longevity and optimal performance by maintaining a clean operating environment.
- Suits Thompson® Valve II Metering Valve
- 1/8'' NPT or 1/4" NPT - Bronze Silencer / Brass Strainer / Breather Vent
- An alternative replacement to Schmidt® 2152-000-17, or GV215200017
- Used to keep dust out of the piston/cylinder top of the Thompson valve
- Sold Individually
-
IPC1003
- Replacement brake housing for RotorBlast Internal Pipe Blasting Tool
IPC1003- Replacement brake housing for RotorBlast Internal Pipe Blasting Tool
-
IPC1015
- Replacement rear end plate for RotorBlast Internal Pipe Blasting Tool
IPC1015- Replacement rear end plate for RotorBlast Internal Pipe Blasting Tool
-
FPSP25
- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
FPSP25- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
-
HTRAGWT
- Highly absorbent
- Sold as box of 220 pre-cut rags
- Cotton, pre-washed
- Recycled material
- Random cuts
- Low lint
- 25lb total weight
HTRAGWT- Highly absorbent
- Sold as box of 220 pre-cut rags
- Cotton, pre-washed
- Recycled material
- Random cuts
- Low lint
- 25lb total weight
-
-
INEBP45
- Tool used to identify the presence of water, oil or other contaminants in compressed air used for blasting and coating applications
- In accordance with ASTM D 4285 - attach a single piece of blotter paper to a solid backing using tape
- Paper can be marked upon with critical test information for later documentation and/or reference
- Pre-cut 6" x 6" pieces
INEBP45- Tool used to identify the presence of water, oil or other contaminants in compressed air used for blasting and coating applications
- In accordance with ASTM D 4285 - attach a single piece of blotter paper to a solid backing using tape
- Paper can be marked upon with critical test information for later documentation and/or reference
- Pre-cut 6" x 6" pieces
-
DMMEM200
- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
DMMEM200- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
-
- Nylon webbing whipchecks - easier to install, less damaging to hose and will provide a longer service life
- The use of a whip check restraint is mandatory on all hoses. If you have any questions about the best restraint to use, please contact us directly.
>>> Click to SEARCH <<<
If your unable to locate what you need, Contact Us today!
Navigating our extensive inventory is a breeze, thanks to our user-friendly online shop. With an easy-to-search platform, you can quickly find the exact part you’re looking for, be it for a specific valve, machine, or any other component. And if ever you’re unsure about the right part for your equipment, our exceptional customer service team is always on hand to guide you. With a deep understanding of sandblasting equipment, they will help you pinpoint the exact replacement part you need, ensuring minimal downtime and optimized performance.
In short, for all your sandblasting equipment repair part needs, look no further. From a vast selection of OEM parts, easy online shopping, to unmatched customer service support, we’ve got you covered. Ensure the longevity and efficiency of your equipment by choosing the best in the business.