Blasting Parts & Consumables
Showing 106–120 of 605 results
-
CHE132C
- Chlor*Rid is a liquid soluble salt remover, which includes chlorides, nitrates, and sulfates
- Typically used as part of the surface preparation process prior to application of coatings.
- Apply using a pressure washer before you blast.
- Removing them prior to blasting means they will not be blasted into your profile and decrease the risk of coating failures
- Sold in 5-gallon drums
- Genuine products - manufactured by Chlor-Rid
CHE132C- Chlor*Rid is a liquid soluble salt remover, which includes chlorides, nitrates, and sulfates
- Typically used as part of the surface preparation process prior to application of coatings.
- Apply using a pressure washer before you blast.
- Removing them prior to blasting means they will not be blasted into your profile and decrease the risk of coating failures
- Sold in 5-gallon drums
- Genuine products - manufactured by Chlor-Rid
-
DMECK3999
- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.
DMECK3999- Abrasion resistant, flex coated control cable
- Designed to clip onto your battery and connect to your electric deadman control box
- Powers your deadman system from your compressor or any other 12v available battery.
-
DCBPP12A
- Lightweight, portable, high efficiency fan
- 2000 cfm, 12" fan
DCBPP12A- Lightweight, portable, high efficiency fan
- 2000 cfm, 12" fan
-
IPC1099Common wear items for IPC1000 RotorBlast includes the following:
- 30 Leather dust seals IPC1013
- 2 Tube locking rings, IPC1011
- 1 Bearing seal, IPC1012
- 2 Double seal bearings, IPC1009
- 1 Tube casting, IPC1008
- 1 Brake with lining, IPC1007
- 1 Rotating head, IPC1002
- 4 Pipe plugs, IPC1001 (aka FPSP25)
- 2 Tungsten Carbide washers, IPC1014
- 2 Rubber lined nipples, IPC1018
IPC1099Common wear items for IPC1000 RotorBlast includes the following:- 30 Leather dust seals IPC1013
- 2 Tube locking rings, IPC1011
- 1 Bearing seal, IPC1012
- 2 Double seal bearings, IPC1009
- 1 Tube casting, IPC1008
- 1 Brake with lining, IPC1007
- 1 Rotating head, IPC1002
- 4 Pipe plugs, IPC1001 (aka FPSP25)
- 2 Tungsten Carbide washers, IPC1014
- 2 Rubber lined nipples, IPC1018
-
IPC1008
- IPC1008, RB-6 Replacement tube casting with 1 3/8" thread
- For IPC1000 RotorBlast
- NOTE - this item is also included in Spare Parts Kit, IPC1099
IPC1008- IPC1008, RB-6 Replacement tube casting with 1 3/8" thread
- For IPC1000 RotorBlast
- NOTE - this item is also included in Spare Parts Kit, IPC1099
-
NA41212
- Cotton Drill / canvas material
- PVC dotted palm for improve grip
- Knit cuffs keep dirt and debris from entering the glove
- One size fits all
NA41212- Cotton Drill / canvas material
- PVC dotted palm for improve grip
- Knit cuffs keep dirt and debris from entering the glove
- One size fits all
-
This glove delivers superior chemical resistance (including to MEK) and offers good dexterity and comfort. It has the following specifications:
- Thinnest butyl glove we offer, delivering enhanced comfort
- ANSI 3 Abrasion Resistance rating
- Latex free
- Roughened hand-surface for improved gripping power
- Effective protection against highly aggressive chemicals, including aldehydes, ketones, and esters. See Documents tab for specific chemical protection chart.
-
- DO NOT use for breathing air
- Industrial interchange fittings are 300 psi rated
- Brass or plated steel bodies with brass or steel valves
- Most commonly used in the USA
-
DMRGNE2000PC
- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
DMRGNE2000PC- Large blade design
- 12 Volt or 24 volt electric operation
- Unit supplied with 12" (300mm) short cable
- Comes with TwistLok plug
-
DMRGN1000
- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
DMRGN1000- Conventional bleeder-type deadman control handle
- 1/4" (6mm) (supply) x 1/8" (3mm) (return) threaded connectors
- Large lever design
- Use only with equipment designed for bleeder-style handles - DO NOT use with Combo or Thompson Valves
-
DMRMCATCK
BlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 1" abrasive trap on the RMC valve (factory part number 01925). Includes the following:
- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
NOTE: BlastOne also has retrofit kids with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
DMRMCATCKBlastOne has the parts to maintain your Clemco® blast equipment. This is the rebuild kit for 1" abrasive trap on the RMC valve (factory part number 01925). Includes the following:
- DMRMCATCS Abrasive Trap Screen (3)
- BA02013 O-Ring (2)
- Clean Screen Decal (Not available separately)
- DMRMCATCSG Gasket
NOTE: BlastOne also has retrofit kids with upgraded valves, and which are designed to reduce maintenance while keeping your current pot. For pressure hold retrofit kits, see here. For pressure-release retrofit kits, see here.
>>> Click to SEARCH <<<
If your unable to locate what you need, Contact Us today!
Navigating our extensive inventory is a breeze, thanks to our user-friendly online shop. With an easy-to-search platform, you can quickly find the exact part you’re looking for, be it for a specific valve, machine, or any other component. And if ever you’re unsure about the right part for your equipment, our exceptional customer service team is always on hand to guide you. With a deep understanding of sandblasting equipment, they will help you pinpoint the exact replacement part you need, ensuring minimal downtime and optimized performance.
In short, for all your sandblasting equipment repair part needs, look no further. From a vast selection of OEM parts, easy online shopping, to unmatched customer service support, we’ve got you covered. Ensure the longevity and efficiency of your equipment by choosing the best in the business.