My Account
All Products
Showing 181–195 of 1332 results
-
BlastOne offers a full selection of industrial fittings. This group is the Male Thread x Push-Lock Hose Barb. Other information is as follows:- Push-on Hose Barb (aka Hose tail) x NPTF Male Thread. (First dimension is the hose ID)
- Not intended for use with crimp ferrules or worm clamps
- Yellow plastic cap
- Applications: Compatible with air, most fluids, and low-pressure hydraulic hoses that are push-lock type
- Operating Pressure Range: 350 PSI maximum
-
BlastOne offers a full selection of industrial fittings. This group is the Male Thread x 90° Elbow Push-Lock Hose Barb. Other information is as follows:
- Male NPTF x Push-on Hose Barb 90° Elbow
- Yellow plastic cap
- Not intended for use with crimp ferrules or worm clamps
- Applications: Compatible with air, most fluids, and low-pressure hydraulic hoses that are push-lock type
- Operating Pressure Range: 350 PSI maximum
Operating Temperature Range: -40 to 150F
-
BlastOne offers a full selection of industrial fittings. This group is the Brass Reducer Bushings. Other information is as follows:
- 1st dimension is the NPTF Male Pipe size
- 2nd dimension is the NPTF Female Pipe size
- Operating Pressure Range: 1000 PSI
- Operating Temperature Range: -65 to 250F
-
BlastOne offers a full selection of industrial fittings. This group is the Hex Nipples. Other information is as follows:
- NPTF Male Threads
- Both standard and reducer versions available
- Operating Pressure Range: 1000 PSI
- Operating Temperature Range: -65 to 250F
-
This nitrile glove delivers excellent grip for most wet and greasy surfaces, suitable for applications involving contact with oils, cleaners, etc. It has the following specifications:
- 6 mil thickness, 9.5 inches long
- Embossed internal grip provides extra traction
- Fish-scale pattern grip
- Powder free
- Latex free
- Touchscreen compatible
-
DMMEM100KIT
The Controlled Expansion Nozzle (CEN) Muffler Kit by Axxiom / Schmidt for Mega Pots significantly improves safety as well as reducing blowdown noise.
- Using a CEN muffler removes the risk of freeze-up at the vent. Without this muffler, dangerous pressure can remain in the pot due to vent freeze-up. Injury or death can result to an operator who removes the abrasive loading cover under pressure.
- In addition, noise levels during blowdown without a CEN can exceed 140db. With the CEN, the noise is reduced to 92db.
- The kit includes a 3" NPT thread connection, and all parts needed to connect the muffler to the pot
DMMEM100KITThe Controlled Expansion Nozzle (CEN) Muffler Kit by Axxiom / Schmidt for Mega Pots significantly improves safety as well as reducing blowdown noise.
- Using a CEN muffler removes the risk of freeze-up at the vent. Without this muffler, dangerous pressure can remain in the pot due to vent freeze-up. Injury or death can result to an operator who removes the abrasive loading cover under pressure.
- In addition, noise levels during blowdown without a CEN can exceed 140db. With the CEN, the noise is reduced to 92db.
- The kit includes a 3" NPT thread connection, and all parts needed to connect the muffler to the pot
Part Number Purchase Price DMMEM100KIT $1,639.05 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$1,639.05
-
-
The PosiTest® HHD - DeFelsko's solution for detection of holidays, porosity, pinholes, leaks and other discontinuities in coatings and linings that are more than 10 mils (250 microns) thick.
- Advanced pulse or continuous DC technology
- Lightweight and ergonomic design
- Auto voltage calculator based on coating thickness
- Multiple electrode options with custom availability
- Long Form Certificate of Calibration included
Available in 4 Kit options as follows:
- PosiTest HHD Kit (2 versions)
- Stick-type with Pulsed DC Output
- 72 Wh Li-ion battery pack with built-in charge indicator
- Durable Pelican Storm Case
- 20" Electrode Rod (or substitute 5" Electrode, with suffix -S after the part number)
- Shoulder Strap
- 25' earthing cable and smart charger with universal AC voltage input
- PosiTest HHD Basic Kit (same as above HHD kit except for the following)
- 36 Wh Li-ion battery pack instead of 72 Wh
- Hard Shell Case instead of Pelican Case
- 5" Electrode Rod
- (Note - the above HHD instruments can be converted to wand configurations, aiding in testing hard-to-reach areas, by adding the optional HHDWAND Handheld Wand.)
- PosiTest HHD C Kit
- Wand-type with Continuous DC Output
- 18650 Li-ion Batteries (4)
- Hard Shell Case
- Extension rod is not required, but available
Several options are available for PosiTest HHD instruments, including:
- Rolling Spring Electrodes, and Conductive Paddle to aid in precise location of holidays
- Flat Wire Brush Electrodes
- Half-Circle Brush Electrodes
- Electrode Adaptors, makes other brands of electrodes compatible with the HHD
- Electrode Rods (for HHD) and Extension Rod (for HHD C)
Note: For coating thicknesses between 0 and 20 mils (0-500 microns), the PosiTest LPD is recommended.
-
DMRMCATCSG
BlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement gasket for 1" abrasive trap (factory part number 02434).
DMRMCATCSGBlastOne has the parts to maintain your Clemco® blast equipment. This is the replacement gasket for 1" abrasive trap (factory part number 02434).
Part Number Purchase Price DMRMCATCSG $5.67 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$5.67
-
-
Junction Box assemblies include the deadman controls for Bulk pots, and are required when retrofitting an old pot with new valves. Available in 2 and 4 outlet configurations.
-
INDHHDCEXTROD
- 17" Rod
- For use with PosiTest HHD C
- Genuine DeFelsko product
INDHHDCEXTROD- 17" Rod
- For use with PosiTest HHD C
- Genuine DeFelsko product
Part Number Purchase Price INDHHDCEXTROD $166.67 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$166.67
-
-
INDLPDEXT
BlastOne offers all parts and accessories for DeFelsko testing instruments.
This extension rod accessory extends the reach of the PosiTest® Low Voltage Pinhole Detector by 12" (305mm). Multiple extensions can be connected together to further extend the reach.
MPN: LPDEXTROD
INDLPDEXTBlastOne offers all parts and accessories for DeFelsko testing instruments.
This extension rod accessory extends the reach of the PosiTest® Low Voltage Pinhole Detector by 12" (305mm). Multiple extensions can be connected together to further extend the reach.
MPN: LPDEXTROD
-
Upgrade old technology Bulk pots from donut valves & pinch valves to state-of-the-art TeraValve systems using a retrofit kit. Available in 2 or 4 outlet configurations.
The CEN Mega Exhaust Muffler retrofit kit is a common option that can be conveniently added when performing this retrofit.
Note: matching Junction Box is available separately. Retrofitting is recommended only for mega blasters with good structural integrity.
These are the parts kits only. BlastOne can perform the retrofit if desired - contact us for pricing and details.
-
INDDTROLLER
Optional spring-loaded Dust Tape Roller, used to apply recommended constant force.
INDDTROLLEROptional spring-loaded Dust Tape Roller, used to apply recommended constant force.
Part Number Purchase Price INDDTROLLER $325.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$325.00
-
-
INDLPDACCPK
BlastOne offers all DeFelsko testing instruments, accessories, and supplies.
This pack includes adaptable sponge hardware and accessories to convert the Basic Kit to the Complete Kit. It includes the following:
- Adaptable Sponge Hardware
- Roller
- Internal Diameter
- 8" x 8" (20 cm x 20 cm) Sheet Sponge for custom usages
- Wetting Agent
- Extension Accessories
- Extension rods provide an additional 2' (0.6 m) of reach
- Universal adapters to extend existing paint rollers and poles
- 40' (12 m) Ground Wire
- Magnetic Grounding Post
- Hard Shell Carrying Case
MPN: LPDACCPK
INDLPDACCPKBlastOne offers all DeFelsko testing instruments, accessories, and supplies.
This pack includes adaptable sponge hardware and accessories to convert the Basic Kit to the Complete Kit. It includes the following:
- Adaptable Sponge Hardware
- Roller
- Internal Diameter
- 8" x 8" (20 cm x 20 cm) Sheet Sponge for custom usages
- Wetting Agent
- Extension Accessories
- Extension rods provide an additional 2' (0.6 m) of reach
- Universal adapters to extend existing paint rollers and poles
- 40' (12 m) Ground Wire
- Magnetic Grounding Post
- Hard Shell Carrying Case
MPN: LPDACCPK
Part Number Purchase Price INDLPDACCPK $750.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$750.00
-
- Adaptable Sponge Hardware
-
INDLPDCBLDWAND
BlastOne carries all DeFelsko instruments, supplies, & accessories.
This accessory converts the PosiTest LPD low-voltage pinhole detector into a cabled wand style unit and is compatible with the rectangular and roller sponge hardware (not included).
The unit comes complete with the remote wand handle and a 5' (1.5m) hot-wire cable.
INDLPDCBLDWANDBlastOne carries all DeFelsko instruments, supplies, & accessories.
This accessory converts the PosiTest LPD low-voltage pinhole detector into a cabled wand style unit and is compatible with the rectangular and roller sponge hardware (not included).
The unit comes complete with the remote wand handle and a 5' (1.5m) hot-wire cable.
Part Number Purchase Price INDLPDCBLDWAND $60.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$60.00
-
