Abrasive Recyclers Recovery & Vacuum Equipment
Showing 31–42 of 42 results
-
VC803300091
BlastOne has the parts needed to for your MiniBRS G2 Trigger Workheads. This is the Vacuum Workhead Trigger Guard (8033-000-91) for both pneumatic and electric versions.
VC803300091BlastOne has the parts needed to for your MiniBRS G2 Trigger Workheads. This is the Vacuum Workhead Trigger Guard (8033-000-91) for both pneumatic and electric versions.
-
BlastOne offers a selection of popular replacement Filter Cartridges for most dust collectors. Additional details as follows:
- Suits Mobile Dust Collector Units, Blast Room Dust Collectors and Cabinet Dust Collectors
- Multiple media types available
- 80/20 cellulose/poly. (aka Cellulex®). General purpose application. Merv 10 rated.
- 80/20 treated cellulose/poly. (aka Endura-Tek™). General purpose filtration with increased resistance to moist air. Merv 10.
- Nano. (aka UltraWeb). Used when extra filtration efficiency is required - often in hazardous dust applications such as lead or asbestos. Also offers longer life and lower energy requirements. Merv 15.
- Spunbond UltraWeb. Similar to standard Nano with increased resistance to moist air. Merv 15.
- All are available in standard or FR rating. (Call or chat for pricing on FR versions)
Many more cartridge filter types available - see cross reference chart under the Documents tab. If you don't see what you need, chat or call 1-800-999-1881 with your questions.
Note: Brand of product may vary.
-
Many time-saving Vac Hose Fittings are available. This group includes:
- Vac Hose Wyes, join 2 smaller hoses to 1 larger hose
- Vac Hose Splitters, join 3 or 4 smaller hoses to 1 larger hose
- Easy to install and remove for hassle-free maintenance
- Made from durable carbon steel
-
Many time-saving Vac Hose Fittings are available. This group includes:
- Barbed & smooth Vac Hose Menders
- Reducing Joiners, to transition larger hose to smaller one
- Suitable for repairing or joining hoses
- Connect same size hoses or adapt different sizes together
- Easy to install and remove for hassle-free maintenance
- Available in multiple types, including carbon steel and zinc-plated steel.
-
Industrial Vacuums are powerful! So much so that if your arm gets sucked into the hose, it can cause substantial bodily harm.
Vac Hose Safety Inlets are designed to keep the operator safe. Don't wait until you have an incident - equip your vacuum hoses with these simple, yet effective inlets.- Protect your operator with the Vacuum Safety Inlet Sleeve
- Fits onto the inlet of your vacuum hose to reduce accidents involving operator clothing / limbs
- Durable construction resists wear and tear for long-lasting protection
-
Many time-saving Vac Hose Fittings are available. This group includes:
- Combination Nipples, to connect vacuum equipment to vacuum hose
- Barbed hose tail on one end, male thread on the other
- Made from zinc-plated steel (other types available)
- Easy to install and remove for hassle-free maintenance
- Single Sizes and Jump Sizes Available
-
VCBV023
- Suits VCBV200 Blast and Vac Workhead
- Blast and Vacuum Central Wear Liner
- Used to prevent premature wear to the workhead
- Sold Individually
VCBV023- Suits VCBV200 Blast and Vac Workhead
- Blast and Vacuum Central Wear Liner
- Used to prevent premature wear to the workhead
- Sold Individually
-
VCBV280
- Suit Blast and Vac Workhead VCBV100 Large Wheeled Unit
- Replacement flat brush creates a seal with the surface to capture dust and abrasive
- VCBV100 Workhead uses a single large flat brush seal
- Sold Individually
VCBV280- Suit Blast and Vac Workhead VCBV100 Large Wheeled Unit
- Replacement flat brush creates a seal with the surface to capture dust and abrasive
- VCBV100 Workhead uses a single large flat brush seal
- Sold Individually
-
VCBV255
- Suit Blast and Vac Workhead VCBV200
- Replacement inner brushes create a seal with the surface to capture dust and abrasive
- Internal flat brush, used in combination with Outer brush
- Sold Individually
- Bristle Length: 1 ½ (38mm)
- Compatible: BNV6
- Inner Brush and Outer Brush required to achieve effective sealing on several types of work heads
- Use in conjunction with work head to vacuum blast flat surfaces or slightly rounded surfaces
VCBV255- Suit Blast and Vac Workhead VCBV200
- Replacement inner brushes create a seal with the surface to capture dust and abrasive
- Internal flat brush, used in combination with Outer brush
- Sold Individually
- Bristle Length: 1 ½ (38mm)
- Compatible: BNV6
- Inner Brush and Outer Brush required to achieve effective sealing on several types of work heads
- Use in conjunction with work head to vacuum blast flat surfaces or slightly rounded surfaces
-
CopperVac is the heavy-duty vacuum hose for highly abrasive media recovery. Featuring a polyurethane liner, rigid PVC spiral reinforcement, and copper wire for static dissipation, it's perfect for sand and gravel vacuuming as well as any abrasive blasting media. Available in a range of sizes, experience the power of CopperVac now!
- Heavy duty, extra thick abrasion-resistant liner
- Rigid PVC spiral (counter-clockwise helix)
- Flexible, even in cold temperatures
- Copper wire, for static dissipation
-
VCBV250
- Suit Blast and Vac Workhead VCBV200
- Replacement outer brushes create a seal with the surface to capture dust and abrasive
- Secondary flat outer brush, use with inner brush as well
- Sold Individually
VCBV250- Suit Blast and Vac Workhead VCBV200
- Replacement outer brushes create a seal with the surface to capture dust and abrasive
- Secondary flat outer brush, use with inner brush as well
- Sold Individually
-
VCBV800
- Pinovo Pico is one of the most ingenious vacuum blasting discoveries in 10 years
- Hand-held dustless external pipe blasting system.
- Multiple different sized work-heads adapt to different sized pipe.
- Works for 2" - 8" pipes
- Genuine Parts - Manufactured by Pinovo in Norway
- Minimal Availability in USA - Request a quote/express interest
VCBV800- Pinovo Pico is one of the most ingenious vacuum blasting discoveries in 10 years
- Hand-held dustless external pipe blasting system.
- Multiple different sized work-heads adapt to different sized pipe.
- Works for 2" - 8" pipes
- Genuine Parts - Manufactured by Pinovo in Norway
- Minimal Availability in USA - Request a quote/express interest