Instruments
Showing 61–75 of 148 results
-
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. The PosiTector® DPMS version (only) in the Dew Point Meter family of probes has the unique capability of accepting these two optional accessories, which are:
- PRBDPMHSP, Hand-Held Surface Temperature Probe, for spot checking hard-to-reach surfaces
- PRBDPMLTP, Liquid Temperature Probe, for checking the temperature of paint and other industrial liquids
-
INDGLSCLEANKITThe DeFelsko GLS Gloss Meter has an on-board calibration standard. Periodically, or when dust / dirt are visible, the gloss standard should be cleaned to ensure measurement accuracy. 10 packs of cleaning wipes are included with each new DeFelsko GLS kit. This item is also a set of 10 wipes, and is available separately as a replacement order item. MPN: GLSCLEANKITINDGLSCLEANKITThe DeFelsko GLS Gloss Meter has an on-board calibration standard. Periodically, or when dust / dirt are visible, the gloss standard should be cleaned to ensure measurement accuracy. 10 packs of cleaning wipes are included with each new DeFelsko GLS kit. This item is also a set of 10 wipes, and is available separately as a replacement order item. MPN: GLSCLEANKIT
-
Surface Profile Standards and Shim Sets are used for checking and adjusting calibration on PosiTector SPG, PosiTector RTR (and other depth micrometer probe) instruments. Product details as follows:
- For the PosiTector SPG:
- Certified Standards. Typically used in calibration labs, these are available for any user who desires this level of verification. Includes serialized and traceable height standards mounted to a metal plate. Labeled in both metric and imperial units.
- Certified Shim Set. Premium option for everyday use with any depth micrometer using a fine-pointed probe (as well as the PosiTector SPG). Includes 3 shims at 50/125/500 microns (2, 5, 20 mils).
- Zero Glass Plate / Metal Shim (Non-Certified). For training and quick checks for accuracy, each new SPG unit comes with this verification set, with replacement / additional units also available for purchase here.
- For the PosiTector RTR: (both models unless otherwise noted)
- Certified Shim Set. Premium option to check Peak Height measurements for accuracy verification on the RTR series (as well as other spring micrometer replica tape readers).
- Non-Certified Shim Set (aka Precision Plastic Shim Set). Lower cost version of the above, ideal for everyday accuracy verification.
- Single Check Shim. This non-certified shim comes standard with each new RTR and is available as a replacement if desired, although it is more economical to purchase the above full set.
- Check Tape. This reusable tape is used to verify Peak Density, and is used on the RTR 3D model only.
- For the PosiTector SPG:
-
BlastOne offers all accessories and replacement parts for DeFelsko testing instruments. The PosiTector Surface Profile Gauges have replaceable tungsten carbide tips and are available as follows:
- 60° Angle for ASTM (USA) applications, used in the Integral, Standard Cabled, and Convex Cabled probes.
- 30° Angle for AS 3894.5-C (Australia) applications, also used in the Integral, Standard Cabled, and Convex Cabled probes.
- CS Tip for Textured Coatings probes.
- TS Tip for Concrete Surface probes.
-
INDSSTNEEDLEBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. The PosiTector SST Bresle disposable test patches require hypodermic needles for use. These replacement needles come in a pack of 10 and are readily available here.INDSSTNEEDLEBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. The PosiTector SST Bresle disposable test patches require hypodermic needles for use. These replacement needles come in a pack of 10 and are readily available here.
-
IN700ATDTMPDrilling template for 50mm dollies to isolate test area. Ideal for thicker coatings on concrete. Includes (10) 5/32" (4mm) drill bits. For use with PosiTest AT. MPN: TMPLTASIN700ATDTMPDrilling template for 50mm dollies to isolate test area. Ideal for thicker coatings on concrete. Includes (10) 5/32" (4mm) drill bits. For use with PosiTest AT. MPN: TMPLTAS
-
INDCMMISBATBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. Replacement batteries for the PosiTector CMM IS concrete moisture measuring probes are available in packs of 10. With a fresh battery, each probe can remain powered for up to 3 weeks and broadcast wirelessly via Bluetooth while in situ.INDCMMISBATBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. Replacement batteries for the PosiTector CMM IS concrete moisture measuring probes are available in packs of 10. With a fresh battery, each probe can remain powered for up to 3 weeks and broadcast wirelessly via Bluetooth while in situ.
-
INDDPMLBATBlastOne offers all accessories and replacement parts for DeFelsko testing equipment. The DPM L PosiTector Dew Point Meter Logger uses (2) lithium CR 2032 coin-type batteries. Replacement batteries are available in packs of 5 here. MPN: DPMLBATINDDPMLBATBlastOne offers all accessories and replacement parts for DeFelsko testing equipment. The DPM L PosiTector Dew Point Meter Logger uses (2) lithium CR 2032 coin-type batteries. Replacement batteries are available in packs of 5 here. MPN: DPMLBAT
-
INDSSTDISPTIPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment dispensing tips are used with the PosiPatch magnetic rings and are available as replacements in this convenient package of 10 units. MPN: SSTDISPTIPINDSSTDISPTIPBlastOne offers all accessories and replacement parts for DeFelsko testing instruments. As part of the PosiTector SST test process, deionized water must be injected under the patch. These replacment dispensing tips are used with the PosiPatch magnetic rings and are available as replacements in this convenient package of 10 units. MPN: SSTDISPTIP
-
BlastOne offers all accessories and replacement parts for DeFelsko testing equipment. Replacement fins for the PosiTector CMM IS probe come in packs of 4 or 16. The fins help ensure the stability of the probe in the test hole and should be replaced when worn.
-
INDCMMISSS10PKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment. Salt solution packets for Positector® CMM IS measuring probes come in packs of 10. The salt packets are part of the calibration-check process, and are used in the calibration container. MPN: CMMISSS10PKINDCMMISSS10PKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment. Salt solution packets for Positector® CMM IS measuring probes come in packs of 10. The salt packets are part of the calibration-check process, and are used in the calibration container. MPN: CMMISSS10PK
-
INDCMMISSTK10PKExtensions are used to extend the reach of the DeFelsko CMM IS concrete measuring meters. Each new meter comes standard with 2 extensions, allowing testing for a 4 inch concrete slab. Thicker slabs may require these extensions to obtain accurate test results, and are available separately in packs of 10.INDCMMISSTK10PKExtensions are used to extend the reach of the DeFelsko CMM IS concrete measuring meters. Each new meter comes standard with 2 extensions, allowing testing for a 4 inch concrete slab. Thicker slabs may require these extensions to obtain accurate test results, and are available separately in packs of 10.
-
Peak-to-valley height (aka Surface Profile) is a critical measurement for calculating expected coating performance, meeting coating manufacturer specifications, and estimating coverage requirements. Measuring surface profile has been done successfully for over 50 years with the Testex replica tape and spring micrometers. DeFelsko offers multiple Analog options for these spring micrometers (aka Snap Gages, or Dial Thickness Gages), as follows:
- Certified. Available in:
- Imperial / Mils
- Metric / Microns
- Non-Certified. Available in:
- Imperial / Mils
- Metric / Microns
- Linearized in Mils
- Package Options. Available as:
- Basic Micrometer kits (aka Dial Thickness Gage Micrometer), including choice of snap gage, plastic burnishing tool, carrying case, instructions & 1 year warranty.
- Complete kits (aka Replica Tape Kits), including Basic kit above as well as Training Surface Tool, and 1 roll each of Testex Press-O-Film Coarse and X-Coarse tapes.
- (Digital Replica Tape Readers also available, see details on their separate page.)
- Certified. Available in: