Rental & Site Equipment
Showing 16–30 of 61 results
-
VAVaculoadIV
AVAILABLE FOR RENTAL OR PURCHASE
ABRASIVE RECOVERY VACUUM SYSTEM- Will vacuum up to 8 ton/hour of garnet
- Requires 900cfm of air at 120 psi to operate
- Skid mounted abrasive recovery system, Pneumatically operated
- 4 Dust Collector Cartridges with filtration area of 904 sq ft.
- Automatic Reverse Pulse Cleaning
- Works best for dry media disposal
VAVaculoadIVAVAILABLE FOR RENTAL OR PURCHASE
ABRASIVE RECOVERY VACUUM SYSTEM- Will vacuum up to 8 ton/hour of garnet
- Requires 900cfm of air at 120 psi to operate
- Skid mounted abrasive recovery system, Pneumatically operated
- 4 Dust Collector Cartridges with filtration area of 904 sq ft.
- Automatic Reverse Pulse Cleaning
- Works best for dry media disposal
-
Securely fasten sheeting to scaffolding, add access doors, repair rips, and more with our selection of accessories for containment sheeting. Available accessories include:
- Bungee / toggle cords for scaffold sheeting
- Poly tape for heat-shrink and other applications
- Zipper doors
- Heat Guns for heat shrink sheeting
- Cable ties
- Spray Adhesive
- Containment strapping
-
AVAILABLE FOR RENTAL OR PURCHASE
- #1 Deadman in the industry
- Larger internal ports make it faster acting, making it a safer handle
- Compact, slimline design - 30% easier then other handles to hold down
- Simple to make in-field repairs as required
- Available as Electric or Pneumatic
- Geniune Products - Manufactured by Schmidt / Axxiom Manufacturing
-
INEBP45
- Tool used to identify the presence of water, oil or other contaminants in compressed air used for blasting and coating applications
- In accordance with ASTM D 4285 - attach a single piece of blotter paper to a solid backing using tape
- Paper can be marked upon with critical test information for later documentation and/or reference
- Pre-cut 6" x 6" pieces
INEBP45- Tool used to identify the presence of water, oil or other contaminants in compressed air used for blasting and coating applications
- In accordance with ASTM D 4285 - attach a single piece of blotter paper to a solid backing using tape
- Paper can be marked upon with critical test information for later documentation and/or reference
- Pre-cut 6" x 6" pieces
-
APCMF5000
Powerful Portable breathing air station with regulator
- 4 operators can use the one machine
- Not just a Carbon Monoxide monitor - this device actually removes CO, as well as odors, hydrocarbons, etc.
- Powered by two x 9 Volt batteries included
- Carbon Monoxide Monitors are normally mandated on most job sites
APCMF5000Powerful Portable breathing air station with regulator
- 4 operators can use the one machine
- Not just a Carbon Monoxide monitor - this device actually removes CO, as well as odors, hydrocarbons, etc.
- Powered by two x 9 Volt batteries included
- Carbon Monoxide Monitors are normally mandated on most job sites
-
CO375TM150DAVAILABLE FOR RENTAL OR PURCHASE
- 375 cfm Compressor is suitable for 1 blaster
- PSI Range between 125-150psi
- Each compressor brand is different, so please request a quote.
- The 375 cfm air compressor is used extensively in the corrosion control industry. Excellent mobility and easily maintained.
- BlastOne sells both re-manufactured Tier 3 units and the most up to date Tier 4 units.
CO375TM150DAVAILABLE FOR RENTAL OR PURCHASE- 375 cfm Compressor is suitable for 1 blaster
- PSI Range between 125-150psi
- Each compressor brand is different, so please request a quote.
- The 375 cfm air compressor is used extensively in the corrosion control industry. Excellent mobility and easily maintained.
- BlastOne sells both re-manufactured Tier 3 units and the most up to date Tier 4 units.
-
CO1600TM150T4AVAILABLE FOR RENTAL OR PURCHASE
- 1600 cfm Compressor is suitable for 4 blasters
- PSI Range between 150-200psi
- Each compressor brand is different, so please request a quote.
CO1600TM150T4AVAILABLE FOR RENTAL OR PURCHASE- 1600 cfm Compressor is suitable for 4 blasters
- PSI Range between 150-200psi
- Each compressor brand is different, so please request a quote.
-
CO185TM125T4AVAILABLE FOR RENTAL OR PURCHASE
- 185 cfm Compressor is suitable for a very small blaster or a spray pump
- PSI Range between 100-150psi
- Each compressor brand is different, so please request a quote.
CO185TM125T4AVAILABLE FOR RENTAL OR PURCHASE- 185 cfm Compressor is suitable for a very small blaster or a spray pump
- PSI Range between 100-150psi
- Each compressor brand is different, so please request a quote.
-
CO750TM150T4AVAILABLE FOR RENTAL OR PURCHASE
- 750 cfm Compressor is suitable for 1-2 blasters
- PSI Range between 125-175 psi
- Each compressor brand is different, so please request a quote.
CO750TM150T4AVAILABLE FOR RENTAL OR PURCHASE- 750 cfm Compressor is suitable for 1-2 blasters
- PSI Range between 125-175 psi
- Each compressor brand is different, so please request a quote.
-
CO900TM150T4AVAILABLE FOR RENTAL OR PURCHASE
- 900 cfm Compressor is suitable for 2 blasters plus a spray pump
- PSI Range between 125-150psi
- Each compressor brand is different, so please request a quote.
CO900TM150T4AVAILABLE FOR RENTAL OR PURCHASE- 900 cfm Compressor is suitable for 2 blasters plus a spray pump
- PSI Range between 125-150psi
- Each compressor brand is different, so please request a quote.
-
CO1300TM150T4AVAILABLE FOR RENTAL OR PURCHASE
- 1300 cfm Compressor is suitable for 3 blasters
- PSI Range between 150-200psi
- Each compressor brand is different, so please request a quote.
CO1300TM150T4AVAILABLE FOR RENTAL OR PURCHASE- 1300 cfm Compressor is suitable for 3 blasters
- PSI Range between 150-200psi
- Each compressor brand is different, so please request a quote.
-
AVAILABLE FOR RENTAL OR PURCHASE
- The Western Technology 3475 is the #1 Nozzle Mounted Blast Light preferred by Blasting Contractors
- Powerful 1,325 lumen LED light array
- Can be hose mounted (with stanchion) or hand-held
- Multiple configurations available
- Light with 10' cable (unfitted)
- Light with 50-300' cable, fitted with one of the following
- 12-28v Battery Alligator Clips
- 110v Transformer and standard 110v plug
- Mini 3116 twist-lock plugs (use with the optional Western Technology 4-outlet transformer)
- Genuine Products - Manufactured by Western Technology
-
Updated and enhanced! BlastOne has refreshed its highly successful MistBlaster® and has released the latest generation with even more capability! What HAS NOT changed:
- Industry-Leading Flexibility.
- The MistBlaster® is a true dry blaster with the added capability of being the best wet blaster on the market. It is not a limited-purpose dustless / slurry blaster that will sit around gathering dust most days.
- Water and Abrasive flow is separately adjustable. Maximizes production while keeping cleanup to a minimum.
- Reliable design. Uses the latest generation TeraValve® metering valve on the popular 6.5CF pot chassis.
- Abrasive choice. Will work with most abrasives in dry mode. In wet mode, garnet or crushed glass are recommended.
- Enhanced functionality. 4 functions are built into the control panel (Dry Blast, Wet Blast, Wash Down, and now Blow Down)
- Controls flexibility. The dual deadman control system is now set up to operate either electrically or pneumatically.
- High-Flow piping. Air pressure regulator has been deleted and piping has been upgraded to increase nozzle pressure.
- Single outlet TeraValve® abrasive metering valve
- Dual electric / pneumatic controls, including deadman handle and control line
- Industrial-strength Schmidt® VBS II Muffler
- Wheel version - Stand-alone unit, portable configuration
- Skid version - Stand-alone unit, mounted on a steel skid.
- Combo Skid versions, save setup time and storage space. Available in the following configurations:
- Combo Skid 400 cfm Dryer Options as follows:
- Deliquescent type (4-season / highest efficiency)
- Aftercooler Squat type (3-season / less effective in cooler temperatures)
- No Dryer
- Note: Unlike dedicated slurry-type blasters, the MistBlaster is designed around a standard dry vessel. A stand-alone air dryer is required in order to realize a full return on your investment.
- Combo Skid Mounting Options as follows:
- Steel Skid
- Steel Skid with Frame
- Combo Skid Breathing Air Packages as follows:
- With Breathing Air Station (breathing air filter, carbon monoxide alarm, and 50' breathing air line)
- Without Breathing Air Station
- Note: All Combo Skid configurations include an Air Manifold with spare air ports and a 50-gallon tank.
- Combo Skid 400 cfm Dryer Options as follows:
- Retrofit version: Save money by retrofitting your existing 6.5 pot (must be structurally sound). Available in wheel or skid configurations and includes all standard MistBlaster features.
- Industry-Leading Flexibility.