All Products
Showing 151–165 of 1343 results
-
The blast nozzle for the ConeBlast Internal Pipe Blaster is a key element in controlling the volume of air/abrasive flow. It is subject to high wear and is a common replacement part. Additional details:
- Sizes. Two sizes are available, depending on the capacity of your compressed air source.
- BNAFR8 requires 250CFM
- BNARF10 requires 400CFM
- (The size variants are interchangeable.)
- Construction. These nozzles are made from tungsten carbide. For large pipe-cleaning projects, contact us for options on longer-life versions.
- Sizes. Two sizes are available, depending on the capacity of your compressed air source.
-
Designed with an extra-long venturi and concentrated blast pattern, the Hyper (aka XL or Saber) nozzle increases performance substantially. Additional details as follows: Click for Buying Guide
- Performance characteristics:
- Up to 30% faster coating removal and/or
- Allows greater stand-off distance (reduces need to bend over when blasting tank floors, allows greater reach, etc.)
- Thread types & Orifice Size options:
- Contractor 2" (50mm)
- Fine 1-¼" (32mm)
- Orifice size options: 5, 6, 7, 8, & 10
- Liner:
- SiALON silicon nitride, provides longer life and lighter weight than tungsten carbide.
- Jacket:
- All aluminum, non-slip knurled finish
- Design:
- 1-¼" throat entry, extended venturi, 12 inches long
- Performance characteristics:
-
Designed with a 60% larger blast pattern, the Raptor (aka Bazooka) nozzle makes short work of your large commercial blast / sweep blast / brush blast projects. Additional details as follows:
-
Thread types:
- Contractor (2") aluminum threads
- Fine (1-¼") brass threads
-
Liner:
- Silicon nitride, offers lighter weight and longer life than tungsten carbide.
-
Jacket:
- Urethane, for improved resistance to damage
-
Design:
- 1-¼" throat entry, extended venturi
-
Thread types:
-
Standard Tungsten Carbide (aka TVP) blast nozzles are widely used and are a lower-cost, basic general-purpose nozzle with the following characteristics: Click for Buying Guide
- Performance characteristics:
- Venturi design offers up to 40% greater production than straight bore.
- Thread Types:
- 1-1/4" NPSM (32mm) brass fine threads
- 2" (50mm) aluminum contractor threads
- Flange type (unthreaded, and attaches to a blast hose with a standard blast hose quick coupling instead of a nozzle holder)
- Orifice Sizes:
- Contractor & Fine: 3, 4, 5, 6, 7, 8, 10, 12
- Flanged: 6, 7, 8, 10, 12
- Liner:
- Tungsten Carbide, provides longer life than disposable alternatives for industrial blasting projects
- Jacket:
- Contractor and Fine thread versions have poly jacket
- Flanged type is an all-aluminum jacket
- Design:
- 1" (25mm) throat entry for #3 and #4 sizes
- 1 1/4" (32mm) throat entry, for all other sizes
- Additional notes:
- Lowest up-front cost of any industrial blast nozzle.
- Higher weight and shorter lifespan than premium silicon nitride versions.
- Lower total cost of ownership, higher performance, and/or improved ease-of-use may be achieved with one of the premium nozzle options. See You May Also Like below.
- Performance characteristics:
-
The Blast Ninja nozzle is an option for reducing the noise of blasting in certain applications. It offers price-leading economy for applications where production speeds are not critical. Product details are as follows:
- Sizes. Comes in #4, #5, and #6 orifices.
- Threads. Offered in fine or contractor thread in poly, brass, or aluminum threads.
- Liner options. Available in tungsten carbide or extended-life silicon nitride.
-
The Water Induction Nozzle (aka WIN nozzle) is an economical way to enter the wet blasting market. Commonly used in smaller projects, it offers excellent water flow control. Additional Details:
- Use with standard dry blasting equipment. No modifications required.
- Connects to standard garden hose, or you can use a tank with a standard 12v pump if you need to add rust inhibitor to the water.
- Typically stocked with tungsten carbide liner and contractor threads, it is also available with silicon nitride liner and/or fine threads. Contact us for details.
-
- Curved "Banana" Blast Nozzle
- Made from Boron Carbide which is the longest lasting material used for blast nozzles
- Size listed is a #6, which is 3/8" internal diameter
- Has a Medium 3/4" Thread - Requires a special nozzle holder adapter
- Search for “nozzle thread adaptors” to select an adaptor to use with your existing nozzle holder, or contact BlastOne if you want a medium thread nozzle holder.
- Sold Individually
-
Effective solution for blasting in hard-to-reach areas such as:
- Inside of bolt holes
- Inside of close-fitting steel channels
- Difficult access structural steel, such as bridge supports, etc.
- Offers standard extension lengths from 10 to 60 inches, with other options available by special order.
- Can be used with most abrasives
- Attaches to blast hoses with standard 2-prong couplings (not nozzle holders)
- Nozzle is NOT included and shown for illustration purposes only. Requires junior size 3/8" NPT threaded nozzles. Choose the correct one for your application from our Tite-Space nozzle selection here.
- Female version requires only ¾" clearance.
- Male version requires only 1" clearance.
-
GRACO® SPECIAL PURCHASE - ECOQUIP FINAL CLEARANCE! These hoses and nozzles are top quality new condition, and work on all abrasive blasting equipment (not just EcoQuip). These special-purchase products include the following:
- EcoQuip “Replacement” blast hose assemblies, which include coupling / nozzle holder, control line, and a Schmidt® Response deadman handle, in both pneumatic and electric.
- EcoQuip “Extension” blast hose assemblies, which include couplings and control line, in both pneumatic and electric.
- EcoQuip "Bulk Hose", 50' sections of blast hose, without any accessories
- Graco blast nozzles in the following types:
- Standard (contractor thread)
- Hyper (contractor thread)
- SST (medium thread)
- Double Venturi (contractor thread)
-
- Female Pipe Coupling
- FP x FP
- Solid Machined Brass
- Performs to SAE J530 and J531 Standards
- Working Pressure: 1,000 PSI
- Temperature Range: -65°F to +250°F