All Products
Showing 241–255 of 1329 results
-
MKCOMBIS
- Vacuum Powered Steel Grit Recycler designed for onsite clean up and recycling
- Capacity up to 50 tons per hour of steel grit
- Skid Mounted, can be used in portable and fixed installations
- Integrated vacuum recovery for clean up and automatic abrasive cleaning tower
- Recycled abrasive is deposited directly back into your abrasive storage hopper
- (2) High-capacity 6” vacuum inlets for entry of recovered abrasive with 8” connection ports to vacuums
- Adjustable magnetic drum separator for fine tuning of abrasive size
MKCOMBIS- Vacuum Powered Steel Grit Recycler designed for onsite clean up and recycling
- Capacity up to 50 tons per hour of steel grit
- Skid Mounted, can be used in portable and fixed installations
- Integrated vacuum recovery for clean up and automatic abrasive cleaning tower
- Recycled abrasive is deposited directly back into your abrasive storage hopper
- (2) High-capacity 6” vacuum inlets for entry of recovered abrasive with 8” connection ports to vacuums
- Adjustable magnetic drum separator for fine tuning of abrasive size
-
MKCOMBI
- Can be used with most recyclable media
- Latest technology in on-site abrasive recycling, with enhancements made for garnet applications
- Processes up to 7 tons per hour of garnet
- Electrical Requirements 480v, 3 phase, 30 amp
- Compressed Air Requirement of 25 cfm @ 125psi
- Note: Abrasive can be recycled only if it is totally dry
MKCOMBI- Can be used with most recyclable media
- Latest technology in on-site abrasive recycling, with enhancements made for garnet applications
- Processes up to 7 tons per hour of garnet
- Electrical Requirements 480v, 3 phase, 30 amp
- Compressed Air Requirement of 25 cfm @ 125psi
- Note: Abrasive can be recycled only if it is totally dry
-
VAVaculoadIV
AVAILABLE FOR RENTAL OR PURCHASE
ABRASIVE RECOVERY VACUUM SYSTEM- Will vacuum up to 8 ton/hour of garnet
- Requires 900cfm of air at 120 psi to operate
- Skid mounted abrasive recovery system, Pneumatically operated
- 4 Dust Collector Cartridges with filtration area of 904 sq ft.
- Automatic Reverse Pulse Cleaning
- Works best for dry media disposal
VAVaculoadIVAVAILABLE FOR RENTAL OR PURCHASE
ABRASIVE RECOVERY VACUUM SYSTEM- Will vacuum up to 8 ton/hour of garnet
- Requires 900cfm of air at 120 psi to operate
- Skid mounted abrasive recovery system, Pneumatically operated
- 4 Dust Collector Cartridges with filtration area of 904 sq ft.
- Automatic Reverse Pulse Cleaning
- Works best for dry media disposal
-
VCVRS3
- This Blast and Vacuum BRS system is built for high production vacuum blasting work.
- The Vacuum system, blast machine and airdryer are all mounted to one skid.
- The abrasive does not recycle which is ideal when you have very low dust requirements or when your specification calls for the use of virgin abrasive only.
- This system is 100% pnuematic and does not require any electrical power.
- Blast Pot capacity is 3.5 cuft.
- Blast upto 60 sqft / 6 sqm per hour
- Requires 750cfm of air
VCVRS3- This Blast and Vacuum BRS system is built for high production vacuum blasting work.
- The Vacuum system, blast machine and airdryer are all mounted to one skid.
- The abrasive does not recycle which is ideal when you have very low dust requirements or when your specification calls for the use of virgin abrasive only.
- This system is 100% pnuematic and does not require any electrical power.
- Blast Pot capacity is 3.5 cuft.
- Blast upto 60 sqft / 6 sqm per hour
- Requires 750cfm of air
-
VAVacuInt55AVAILABLE FOR RENTAL OR PURCHASE
- Capacity of 4 tons of garnet
- Designed to sit between the VacuLoad and the vacuum head
- Separates abrasive and 90% of dust for reuse or disposal
- Available in 3 sizes – 20, 55, and 100 cu.ft
- Acts as a cyclone separator using power from the main vacuum unit
- No need for compressed air or electric power
- Ideal for abrasive storage
VAVacuInt55AVAILABLE FOR RENTAL OR PURCHASE- Capacity of 4 tons of garnet
- Designed to sit between the VacuLoad and the vacuum head
- Separates abrasive and 90% of dust for reuse or disposal
- Available in 3 sizes – 20, 55, and 100 cu.ft
- Acts as a cyclone separator using power from the main vacuum unit
- No need for compressed air or electric power
- Ideal for abrasive storage
-
Camlock fittings allow quicker connections between sections of vacuum hose. Faster & easier than using tape.
- This group is Type A version, with male adapter coupling and female NPT thread
- Connect same size hoses or adapt different sizes together
- Save time and use Quick Disconnect (QD) fittings
- Economical Aluminum version shown.
- Other materials are available - inquire.
Contact us for additional sizes / options.
-
Camlock fittings allow quicker connections between sections of vacuum hose. Faster & easier than using tape.
- This group is Type B version, with Female coupler and Male NPT
- Connect same size hoses or adapt different sizes together
- Save time and use Quick Disconnect (QD) fittings
- Economical Aluminum with Brass handles shown.
- Other materials are available - inquire.
Contact us for additional sizes / options.
-
Camlock fittings allow quicker connections between sections of vacuum hose. Faster and easier than using tape.
- This group is Type C version, with male hose barb and female connection
- Connect same size hoses or adapt different sizes together
- Save time and use Quick Disconnect (QD) fittings
- Economical Aluminum with brass handles shown.
- Other materials are available - inquire.
Contact us for additional sizes / options.
-
Camlock fittings allow quicker connections between sections of vacuum hose. Faster & easier than using tape.
- This group is Type D version, with female coupler and female NPT thread
- Connect same size hoses or adapt different sizes together
- Save time and use Quick Disconnect (QD) fittings
- Economical Aluminum version shown.
- Other materials are available - inquire.
Contact us for additional sizes / options.
-
Camlock fittings allow quicker connections between sections of vacuum hose. Faster & easier than using tape.
- This group is Type E version, with male hose barb and male connection
- Connect same size hoses or adapt different sizes together
- Save time and use Quick Disconnect (QD) fittings
- Economical Aluminum shown
- Other materials are available - inquire.
-
Camlock fittings allow quicker connections between sections of vacuum hose. Faster & easier than using tape.
- This group is Type F version, with male adapter coupling and male NPT thread
- Connect same size hoses or adapt different sizes together
- Save time and use Quick Disconnect (QD) fittings
- Economical Aluminum version shown.
- Other materials are available - inquire.
Contact us for additional sizes / options.
-
- Popular choice to secure fittings to vacuum hoses.
- Can be used on many other applications.
- Constructed of zinc-plated ductile iron.
-
The Bristle Blaster® is a portable surface preparation tool that combines wire wheels with an ingenious accelerator bar*, to speed production. Benefits include the following:
- Excellent for spot work. Small projects such as rework, weld cleaning, etc., are faster due to no abrasive cleanup needed.
- Highly portable. Light weight and compact makes usage and storage a breeze.
- Simple to use. No need to suit up to use it.
- Quick setup. Plug in and go!
- Safe for most surfaces. Unlike a grinder, the Bristle Blaster® creates a surface profile without removing metal.
While the production speed isn't as high as traditional abrasive blasting, the benefits of no mess and quick setup/teardown make this a very efficient tool for spot work and repairs. It is up to 10x faster than using a hand wire brush. The Bristle Blaster® tools are available in 3 power configurations:
- Electric. Requires 910 watts at 120v.
- Pneumatic. Uses standard shop-air line. Requires less than 20 CFM at 75 or 90PSI.
- Cordless. Rechargeable battery power offers the ultimate in portability.
There are 3 orientation configurations for the wheels, as follows:
- Standard wheel (general purpose)
- Double wheel (faster production for larger surfaces). Note - available in electric only.
- Axial (right angle) wheel (great for reaching inside corners or other areas difficult to reach with the standard wheel). Note - available in pneumatic only.
Additional notes:
- These units create a surface profile between 2.5 and 3.5 mils.
- Wire wheels are also known as belts. BlastOne stocks all carbon steel and stainless Bristle Blaster® replacement belts.
- The standard pneumatic kit includes a dust shroud for attachment to a vacuum cleaner, for even faster clean up.
- Other belt types and machine models available - enquire.
*The Axial version does not come with an Accelerator Bar.