My Account
All Products
Showing 361–375 of 1340 results
-
The Warrior conventional spray pump (aka Graco® Triton) is a popular upgrade to pressure pots. Most see the following benefits:- Saves money. Reduces solvent use by up to 75%.
- Saves time. Cleanup is up to 3 times faster.
- Easy to use. Allows you to watch how much coating you have remaining in the can.
- Versatile. Can be configured to support 2 operators.
- Specs can be found on the Description and Documents tabs
- Kit comes with 1.4 mm AirPro Spray Gun and 25 feet of Twin Air/Paint Hose
- Available as Pail Mount, Stand Mount, Cart Mount, or Wall Mount
- Optional Agitator available to use when spraying zinc
- Optional Upfit Kit available allows a single pump to do double duty by allowing 2 operators
-
- AirSpray Conventional Pressure Pot, used most commonly for spraying thin coatings
- 2.8 Gallon capacity, allows you to mix up a standard 2 gallon kit of paint with ease
- Single or Dual Regulators availabe
- Agitators - if you are spraying coatings like zinc where it will settle out, you need an agitator kit
- Sold Individually
- Genuine Parts - Manufactured by Binks / Carlisle Fluid Technologies
-
Discover the ProPaint Economy Pressure Pot (SKU: P-SMPA10) – a cost-effective solution for occasional use with a 2.5-gallon capacity, suitable for waterborne compositions.- 2.5 gal (10 liter) Capacity
- Standard and agitated setups
- Waterborne compatible versions
- Other sizes and brands are available
-
BIHAR511- Air inlet: 3/8" NPT(f)
- Air outlets: (2 regulated) 1/4" NPT (f) - 1 Each
- 3/8" NPT(f) - 1 Each
- Air outlets: (2 unregulated) 1/4" NPT(f) - 2 Each
- Air Capacity: 60 CFM
- Maximum Temp: 150° F
- Max. Inlet Pressure: 150 psi
- Regulator range: 0-125 psi
BIHAR511- Air inlet: 3/8" NPT(f)
- Air outlets: (2 regulated) 1/4" NPT (f) - 1 Each
- 3/8" NPT(f) - 1 Each
- Air outlets: (2 unregulated) 1/4" NPT(f) - 2 Each
- Air Capacity: 60 CFM
- Maximum Temp: 150° F
- Max. Inlet Pressure: 150 psi
- Regulator range: 0-125 psi
-
BLASTHOSE- High quality, long lasting sandblasting hose
- Blast Hoses have a thick, anti-static, natural rubber liner
- Made to BlastOne Blast Hose specification
- Rated to minimum 175 psi - 3:1 safety factor
- Robust TuffRap™ outer blasting hose cover
- Heavy Wall Blast Hose
- Recommended for use as an extension hose
- Fit with your choice of couplings
- Supplied as a bare hose coil or as a Certified Blast Hose Assembly – certificate is available upon request.
-
- Superior quality, lightweight and highly flexible sandblasting hose
- Blast Hoses have anti-static, natural rubber liner
- Rated to minimum 175 psi - 3:1 safety factor
- Robust TuffRap outer blasting hose cover
- Commonly known as whip hose, supa hose or supahose
- Fit with your choice of nozzle holder and couplings
- Please Request Rental Pricing
-
- Fitted Blast Hose
- Premium blast hose fitted with couplings only
- We have many ways to fit a blast hose
- For a Extension hose we recommend you use 4 ply type
- Fitted and Quality Controlled by BlastOne Trained Staff
-
- Premium blast hose fitted with couplings and nozzle holder
- We have many ways to fit a blast hose
- For a Whip hose we recommend you use 2Ply type
- Most common composition is Aluminum Coupling with Contractor Thread Nylon Nozzle holder
- Fitted and Quality Controlled by BlastOne Trained Staff
-
BNWBHPAdapts a contractor thread nozzle to a wet blasting nozzle. More control than with a halo nozzle.
- Injects water internally into the abrasive / air stream
- Adapter connects to the nozzle holder, and holds a contractor thread nozzle.
- Includes needle valve to optimize mixture
- Requires a pressure washer to operate, set for 500-1000 psi, 2-4 GPM flow
BNWBHPAdapts a contractor thread nozzle to a wet blasting nozzle. More control than with a halo nozzle.
- Injects water internally into the abrasive / air stream
- Adapter connects to the nozzle holder, and holds a contractor thread nozzle.
- Includes needle valve to optimize mixture
- Requires a pressure washer to operate, set for 500-1000 psi, 2-4 GPM flow
-
DMASAPRK00- ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
- This System changes the depressurization flow of the air in the blast hose
- Allows a 200ft blast hose to depressurize in less than 1 second
- Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
- Saves Seconds - Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
- Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
DMASAPRK00- ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
- This System changes the depressurization flow of the air in the blast hose
- Allows a 200ft blast hose to depressurize in less than 1 second
- Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
- Saves Seconds - Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
- Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
- Genuine Products - Manufactured by Schmidt® / Axxiom Manufacturing
Part Number Purchase Price DMASAPRK00 $6,493.12 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$6,493.12
-
-
The Air Pressure Gage is a crucial tool for monitoring air pressure in your blast equipment, ensuring optimal performance and safety. This general-purpose gage is sold individually and designed not to exceed the manufacturer's recommendation. Secure your blasting operations with this reliable Air Pressure Gage for precise and consistent air pressure tracking.- General purpose air pressure gages for monitoring of air pressure
- Do not exceed manufacturers recommendation for blast equipment
- Sold Individually
-
Part Number Purchase Price BA700751902 $272.95 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$272.95
-
-
INDHHDWAND- 1.5m insulated cable, coverts the PosiTest® HHD to a wand-type instrument
- Not for voltages >15kV
INDHHDWAND- 1.5m insulated cable, coverts the PosiTest® HHD to a wand-type instrument
- Not for voltages >15kV
Part Number Purchase Price INDHHDWAND $255.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$255.00
-
-
- GeoSperse roller head
- Optional 9" EvenFlo roller frame
- Order roller cover separately
- 7/8" nut connects to Graco or Titan airless gun or airless extension pole
- Unique captive gasket for fast, simple connection
- 5000 psi rated
-
GR243283- High-performance industrial spray gun
- Form fitted handle - lightweight design
- 2 finger trigger (optional 4 finger)
- No needle adjustment required
- Stainless steel fluid passages
- Lifetime guarantee against needle breakage
- 5000 psi rated
- Includes Hand Tite RAC tip and guard
- Optional Flex Plus gun without fluid tube has direct hose connection for minimal pressure loss
GR243283- High-performance industrial spray gun
- Form fitted handle - lightweight design
- 2 finger trigger (optional 4 finger)
- No needle adjustment required
- Stainless steel fluid passages
- Lifetime guarantee against needle breakage
- 5000 psi rated
- Includes Hand Tite RAC tip and guard
- Optional Flex Plus gun without fluid tube has direct hose connection for minimal pressure loss
