My Account
Abrasive Recyclers Recovery & Vacuum Equipment
Showing 31–45 of 53 results
-
VCBV700- The PiPoint is the smallest hand-held vacuum blasting tool.
- Has 8 interchangeable heads providing flexibility for different job requirements.
- Allows you to blast inside a small box web beam, etc.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 6 ft²/0.6 m² per hour.
- Compressed air requirement: 250 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Genuine Parts – Manufactured by Pinovo in Norway
VCBV700- The PiPoint is the smallest hand-held vacuum blasting tool.
- Has 8 interchangeable heads providing flexibility for different job requirements.
- Allows you to blast inside a small box web beam, etc.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 6 ft²/0.6 m² per hour.
- Compressed air requirement: 250 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Achievable surface profile: 110 µm, depending on blast pressure, grit size, and surface.
- Noise level: 89 dB at 1m distance.
- Genuine Parts – Manufactured by Pinovo in Norway
-
VCBV600- A lightweight closed-circuit vacuum blaster with interchangeable heads.
- Edge blasting tools.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 27 ft²/2.5 m² per hour.
- Compressed air requirement: 320 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Genuine Parts - Manufactured by Pinovo in Norway.
- Limited availability in the USA - Request a quote/express interest.
VCBV600- A lightweight closed-circuit vacuum blaster with interchangeable heads.
- Edge blasting tools.
- Nozzle size: No.6 (⅜”)
- Blasting rate: up to 27 ft²/2.5 m² per hour.
- Compressed air requirement: 320 cfm.
- Surface preparation standards compliance capability: up to SA 3 / SSPC-SP-5 / NACE No. 1.
- Genuine Parts - Manufactured by Pinovo in Norway.
- Limited availability in the USA - Request a quote/express interest.
-
Blast N' Vac Workhead Complete Kits are great for flat surfaces, but custom units are available. Freatures include the following:
- Standard / BNV-2.5
- Standard / BNV-3
- Large with wheels / BNV-4
- Standard / BNV-5
- Super Five™
- Largest workhead available
- Standard / BNV-6
- Right Angle
- Designed to get into smaller areas
The MiniBRS G2 Trigger Workheads are easier to handle than other versions for your vacuum blasting projects. Features include the following:
- Longer lasting brushes
- More containment while blasting
- Improved vacuum flow
- Easier to slide head over surfaces while blasting
- Various Brush options available, including:
- Flat Surface
- Inside Corner
- Outside Corner
- Available in either Electric or Pneumatic
-
VCBV025- Suit Blast and Vacuum Workhead VCBV200
- Replacement handle makes it easy for the operator to maneuver
- If using on a vertical surface you will still require 2 operators
- Has convenient rubber grip
- Sold Individually
VCBV025- Suit Blast and Vacuum Workhead VCBV200
- Replacement handle makes it easy for the operator to maneuver
- If using on a vertical surface you will still require 2 operators
- Has convenient rubber grip
- Sold Individually
-
VCBV104- Suits Blast and Vac Workhead BNV-3/VCBV200 (Standard Unit)
- Nozzle Internal Venturi 1/4" #4 Long Venturi
- Long Lasting
- Sold Individually
VCBV104- Suits Blast and Vac Workhead BNV-3/VCBV200 (Standard Unit)
- Nozzle Internal Venturi 1/4" #4 Long Venturi
- Long Lasting
- Sold Individually
-
VC803300091BlastOne has the parts needed to for your MiniBRS G2 Trigger Workheads. This is the Vacuum Workhead Trigger Guard (8033-000-91) for both pneumatic and electric versions.
VC803300091BlastOne has the parts needed to for your MiniBRS G2 Trigger Workheads. This is the Vacuum Workhead Trigger Guard (8033-000-91) for both pneumatic and electric versions.
Part Number Purchase Price VC803300091 $41.67 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$41.67
-
-
ASEPPIGWhen the primary air dryer is located at a distance from the blast pot, secondary moisture removal becomes critical. The Sponge-Jet moisture separation tank is ideal for this application. Includes the following:
- Handle for easy portability
- Spud / BOSS blast hose fitting
- Multiple sized ball valves & couplings
Note: Customization is available if specific sizes are needed.
Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website. Contact us for fast, competitive pricing or send in the web form quote request.
ASEPPIGWhen the primary air dryer is located at a distance from the blast pot, secondary moisture removal becomes critical. The Sponge-Jet moisture separation tank is ideal for this application. Includes the following:
- Handle for easy portability
- Spud / BOSS blast hose fitting
- Multiple sized ball valves & couplings
Note: Customization is available if specific sizes are needed.
Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website. Contact us for fast, competitive pricing or send in the web form quote request.
Part Number Purchase Price ASEPPIG Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
-
BADSEAL125- Suits BlastOne Vacuload 1 Drum lid
- Used to seal the drum lid to the 55 gallon drum to maintain a good vacuum seal
- 1 1/4" x 1 1/8" D Gasket, with 3M Tape for easy adhesion
- Vacuload 1 Drum requires 8ft of the D-Seal
- Sold by the foot
BADSEAL125- Suits BlastOne Vacuload 1 Drum lid
- Used to seal the drum lid to the 55 gallon drum to maintain a good vacuum seal
- 1 1/4" x 1 1/8" D Gasket, with 3M Tape for easy adhesion
- Vacuload 1 Drum requires 8ft of the D-Seal
- Sold by the foot
Part Number Purchase Price BADSEAL125 $3.75 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$3.75
-
-
BlastOne offers a selection of popular replacement Filter Cartridges for most dust collectors. Additional details as follows:
- Suits Mobile Dust Collector Units, Blast Room Dust Collectors and Cabinet Dust Collectors
- Multiple media types available
- 80/20 cellulose/poly. (aka Cellulex®). General purpose application. Merv 10 rated.
- 80/20 treated cellulose/poly. (aka Endura-Tek™). General purpose filtration with increased resistance to moist air. Merv 10.
- Nano. (aka UltraWeb). Used when extra filtration efficiency is required - often in hazardous dust applications such as lead or asbestos. Also offers longer life and lower energy requirements. Merv 15.
- Spunbond UltraWeb. Similar to standard Nano with increased resistance to moist air. Merv 15.
- All are available in standard or FR rating. (Call or chat for pricing on FR versions)
Many more cartridge filter types available - see cross reference chart under the Documents tab. If you don't see what you need, chat or call 1-800-999-1881 with your questions.
Note: Brand of product may vary.
-
Many time-saving Vac Hose Fittings are available. This group includes:- Vac Hose Wyes, join 2 smaller hoses to 1 larger hose
- Vac Hose Splitters, join 3 or 4 smaller hoses to 1 larger hose
- Easy to install and remove for hassle-free maintenance
- Made from durable carbon steel
-
Many time-saving Vac Hose Fittings are available. This group includes:- Barbed & smooth Vac Hose Menders
- Reducing Joiners, to transition larger hose to smaller one
- Suitable for repairing or joining hoses
- Connect same size hoses or adapt different sizes together
- Easy to install and remove for hassle-free maintenance
- Available in multiple types, including carbon steel and zinc-plated steel.
-
Industrial Vacuums are powerful! So much so that if your arm gets sucked into the hose, it can cause substantial bodily harm.
Vac Hose Safety Inlets are designed to keep the operator safe. Don't wait until you have an incident - equip your vacuum hoses with these simple, yet effective inlets.- Protect your operator with the Vacuum Safety Inlet Sleeve
- Fits onto the inlet of your vacuum hose to reduce accidents involving operator clothing / limbs
- Durable construction resists wear and tear for long-lasting protection
-
Many time-saving Vac Hose Fittings are available. This group includes:- Combination Nipples, to connect vacuum equipment to vacuum hose
- Barbed hose tail on one end, male thread on the other
- Made from zinc-plated steel (other types available)
- Easy to install and remove for hassle-free maintenance
- Single Sizes and Jump Sizes Available
-
VCBV023- Suits VCBV200 Blast and Vac Workhead
- Blast and Vacuum Central Wear Liner
- Used to prevent premature wear to the workhead
- Sold Individually
VCBV023- Suits VCBV200 Blast and Vac Workhead
- Blast and Vacuum Central Wear Liner
- Used to prevent premature wear to the workhead
- Sold Individually
-
DM226340420BlastOne has the parts needed for your MiniBRS G2 Trigger Workheads. This is the Electric Trigger Module Assembly (2263-404-20). A Pneumatic G2 Trigger Deadman control module is also available.DM226340420BlastOne has the parts needed for your MiniBRS G2 Trigger Workheads. This is the Electric Trigger Module Assembly (2263-404-20). A Pneumatic G2 Trigger Deadman control module is also available.Part Number Purchase Price DM226340420 $400.16 Replacement Control Module for G2 Electric Pistol-Grip BRS Workhead
Part #DM226340420
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$400.16
-
