Blasting
Showing 661–675 of 949 results
-
CHENVIROPREPP
- Liquid surface pre-treatment used in lead-based coating removal projects
- Mil thickness required depends on lead level in the coating to be removed.
- When properly applied, the waste media will pass the Lead TCLP test, allowing disposal as non-hazardous waste
- 5 gallons per pail (sold by the pail)
- Full skid quantity is 36 pails (180 gallons)
CHENVIROPREPP- Liquid surface pre-treatment used in lead-based coating removal projects
- Mil thickness required depends on lead level in the coating to be removed.
- When properly applied, the waste media will pass the Lead TCLP test, allowing disposal as non-hazardous waste
- 5 gallons per pail (sold by the pail)
- Full skid quantity is 36 pails (180 gallons)
-
HT6693175
- Suits Trelawny TFP 200 Electric Scaler (HT3202004T)
- Genuine part – manufactured by Trelawny
- Extension Cord
- Sold individually
HT6693175- Suits Trelawny TFP 200 Electric Scaler (HT3202004T)
- Genuine part – manufactured by Trelawny
- Extension Cord
- Sold individually
-
HLNV2004
Visor Kit for RPB Nova 2000 (SKU: HLNV2004) includes latch with screws and the face frame to ensure the continued protection of your blast helmet.
- Suits RPB Nova 2000 Blast Helmet
- Common breakage is because the blaster carries the helmet by the face frame instead of the hand strap provided
- Sold as a Kit including;
- Complete Latch with screws
- Genuine Parts - Manufactured by RPB Safety
HLNV2004Visor Kit for RPB Nova 2000 (SKU: HLNV2004) includes latch with screws and the face frame to ensure the continued protection of your blast helmet.
- Suits RPB Nova 2000 Blast Helmet
- Common breakage is because the blaster carries the helmet by the face frame instead of the hand strap provided
- Sold as a Kit including;
- Complete Latch with screws
- Genuine Parts - Manufactured by RPB Safety
-
VCBV201
- Suit Blast and Vac Workhead VCBV200
- Fine Thread Nozzle Holder
- Connects Blast hose to the nozzle and the workhead.
- You can not use the Workhead without this
- Sold Individually
VCBV201- Suit Blast and Vac Workhead VCBV200
- Fine Thread Nozzle Holder
- Connects Blast hose to the nozzle and the workhead.
- You can not use the Workhead without this
- Sold Individually
-
VCBV280
- Suit Blast and Vac Workhead VCBV100 Large Wheeled Unit
- Replacement flat brush creates a seal with the surface to capture dust and abrasive
- VCBV100 Workhead uses a single large flat brush seal
- Sold Individually
VCBV280- Suit Blast and Vac Workhead VCBV100 Large Wheeled Unit
- Replacement flat brush creates a seal with the surface to capture dust and abrasive
- VCBV100 Workhead uses a single large flat brush seal
- Sold Individually
-
VCBV255
- Suit Blast and Vac Workhead VCBV200
- Replacement inner brushes create a seal with the surface to capture dust and abrasive
- Internal flat brush, used in combination with Outer brush
- Sold Individually
- Bristle Length: 1 ½ (38mm)
- Compatible: BNV6
- Inner Brush and Outer Brush required to achieve effective sealing on several types of work heads
- Use in conjunction with work head to vacuum blast flat surfaces or slightly rounded surfaces
VCBV255- Suit Blast and Vac Workhead VCBV200
- Replacement inner brushes create a seal with the surface to capture dust and abrasive
- Internal flat brush, used in combination with Outer brush
- Sold Individually
- Bristle Length: 1 ½ (38mm)
- Compatible: BNV6
- Inner Brush and Outer Brush required to achieve effective sealing on several types of work heads
- Use in conjunction with work head to vacuum blast flat surfaces or slightly rounded surfaces
-
CopperVac is the heavy-duty vacuum hose for highly abrasive media recovery. Featuring a polyurethane liner, rigid PVC spiral reinforcement, and copper wire for static dissipation, it's perfect for sand and gravel vacuuming as well as any abrasive blasting media. Available in a range of sizes, experience the power of CopperVac now!
- Heavy duty, extra thick abrasion-resistant liner
- Rigid PVC spiral (counter-clockwise helix)
- Flexible, even in cold temperatures
- Copper wire, for static dissipation
-
Customized sheet metal square-to-round adapters, allows easy connection of ducting to ventilation fans, including Black Max fans. NOTE - It is not recommended to put ducting or dust socks on 20" or 24" Black Max electric fans. Pneumatic is OK in all sizes.
- High-quality materials for durability and longevity
- Perfect fit with ducts and fans
- Easy to install
- Suitable for commercial and industrial applications
-
VCBV250
- Suit Blast and Vac Workhead VCBV200
- Replacement outer brushes create a seal with the surface to capture dust and abrasive
- Secondary flat outer brush, use with inner brush as well
- Sold Individually
VCBV250- Suit Blast and Vac Workhead VCBV200
- Replacement outer brushes create a seal with the surface to capture dust and abrasive
- Secondary flat outer brush, use with inner brush as well
- Sold Individually
-
- Multi-purpose inline ball valve
- Plated brass corrosion-resistant body
- Full bore design for maximum airflow
- Rated for use up to 600 psi
- Female NPT threaded ports
- Sold individually
-
GVFSV1022Heavy-duty pipe fitting connects flat sand valve to pusher line, blast hose line, and blast pot nipple. Specifications:
- 150# malleable iron wye
- 1-¼" x 1-¼" x 1-¼" standard NPT female threads
GVFSV1022Heavy-duty pipe fitting connects flat sand valve to pusher line, blast hose line, and blast pot nipple. Specifications:- 150# malleable iron wye
- 1-¼" x 1-¼" x 1-¼" standard NPT female threads
-
- For use with Nylon Coupling Series: PCG-1; PCG-2; PCG-3;
- Material: Double-lipped rubber
- Compatibility:
- PCG-1: 3/4″ ID and Smaller Blast Hose
- PCG-2: 1″ ID Blast Hose
- PCG-3: 1-1/4″ ID and Larger Blast Hose
- Sold as a pack of 10
-
GV215230715
- Replacement direct down base for the 2152-009 Schmidt Jumbo Thompson II Abrasive Metering Valve
- MPN 2152-307-15
GV215230715- Replacement direct down base for the 2152-009 Schmidt Jumbo Thompson II Abrasive Metering Valve
- MPN 2152-307-15
-
BlastOne stocks the Axxiom replacement parts you need to keep your valves operating. These are the bottom base pipe nipples for the Thompson II metering valve:
- 1" x 1", MPN 2152-000-19
- 1-¼" x 1-¼", MPN 2152-000-15
- 1-½" x 1-½", MPN2152-000-11