My Account
Blasting
Showing 676–690 of 949 results
-
GRD32977MB- Suits 50 gallon and 275 gallon water tanks
- Air Operated, Double Diaphragm, Pneumatic Pump - used to Pump water from a water tank to a MistBlaster
- Allows you to have a mixing tank for HoldTite mixture with water when Mist or Vapor Blasting
- Max Working Pressure 100psi
- Free Flow delivery of 7.0 gallons per minute
- Maximum suction height is 12ft
- Air consumption is only 6scfm
- Pump comes complete with water fittings and air fittings
- Genuine Parts - Manufactured by Graco
GRD32977MB- Suits 50 gallon and 275 gallon water tanks
- Air Operated, Double Diaphragm, Pneumatic Pump - used to Pump water from a water tank to a MistBlaster
- Allows you to have a mixing tank for HoldTite mixture with water when Mist or Vapor Blasting
- Max Working Pressure 100psi
- Free Flow delivery of 7.0 gallons per minute
- Maximum suction height is 12ft
- Air consumption is only 6scfm
- Pump comes complete with water fittings and air fittings
- Genuine Parts - Manufactured by Graco
Part Number Purchase Price GRD32977MB $896.10 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$896.10
-
-
NL300
- Contractor 1D standard non-belted
- Tongue buckle leg adjustment
- Plated alloy steel mating buckle torso adjusters ensure ergonomic fit
- Uniquely equipped with 9-grommeted leg adjustment positions allows for increased range of fit
- Paired lanyard parking keepers ensure balanced function for single and double-leg lanyards
- Includes dorsal D-ring made of plated alloy steel with mating buckle chest and tongue buckle leg closures
- ANSI Z359.11-2014- and OSHA 1926.502/1910.66-compliant
NL300- Contractor 1D standard non-belted
- Tongue buckle leg adjustment
- Plated alloy steel mating buckle torso adjusters ensure ergonomic fit
- Uniquely equipped with 9-grommeted leg adjustment positions allows for increased range of fit
- Paired lanyard parking keepers ensure balanced function for single and double-leg lanyards
- Includes dorsal D-ring made of plated alloy steel with mating buckle chest and tongue buckle leg closures
- ANSI Z359.11-2014- and OSHA 1926.502/1910.66-compliant
-
The PX5 PAPR is approved for use with most of the RPB / GVS range of respirators. Refresh or expand your PX5 using the filters and cartridges available below:
- Pre-Filters. Extend the life of the main filters using these. 10 per pack.
- Spark Arrestor. Essential when using the PX5 in certain applications.
- HEPA Cartridge Filter. The workhorse High Efficiency particulate filter, provides maximum filtration (removes 99.97% of particulates down to 0.12 microns.)
- Organic Vapor and Acid Gas Cartridge Filter. (HE/OV/AG.) Label Color Code Yellow/Magenta. The painters favorite. Approved for the following gases:
- Solvents
- Chlorine and Chlorine Dioxide
- Hydrogen Chloride and Hydrogen Fluoride
- Sulphur Dioxide
- Organic Vapors
- Multi-Gas / HE Cartridge Filter. Label Color Code Olive/Magenta. Approved for all the same gases as the OV/AG filter plus the following:
- Ammonia
- Formaldehyde
- Hydrogen Sulfide
- Methylamine
-
NCIRBTT
- Beeper hint / Beeper for high temperature
- Non-contact measurement
- Quick, hygienic and convenient to use, especially on infant and child
- Dual-mode body/object temperature mode available
- Object mode
- Backlit display
- Memory recall
NCIRBTT- Beeper hint / Beeper for high temperature
- Non-contact measurement
- Quick, hygienic and convenient to use, especially on infant and child
- Dual-mode body/object temperature mode available
- Object mode
- Backlit display
- Memory recall
-
HTCP5G
Discover the robust and versatile 5-Gallon Orange Bucket (SKU: HTCP5G), an indispensable tool for professionals and DIY enthusiasts alike. Engineered for durability and functionality, this bucket is a true ally in any setting.
- Lid Included
- Durable Construction: Built to withstand rigorous use in industrial and home environments.
- Eye-Catching Orange: Highly visible for safety and easy location.
- Generous 5-Gallon Capacity: Ample space for various materials, from liquids to solids.
- User-Friendly Design: Ergonomic handle for comfortable transport and use.
- Versatile Use: Ideal for sandblasting, painting, storage, and more.
HTCP5GDiscover the robust and versatile 5-Gallon Orange Bucket (SKU: HTCP5G), an indispensable tool for professionals and DIY enthusiasts alike. Engineered for durability and functionality, this bucket is a true ally in any setting.
- Lid Included
- Durable Construction: Built to withstand rigorous use in industrial and home environments.
- Eye-Catching Orange: Highly visible for safety and easy location.
- Generous 5-Gallon Capacity: Ample space for various materials, from liquids to solids.
- User-Friendly Design: Ergonomic handle for comfortable transport and use.
- Versatile Use: Ideal for sandblasting, painting, storage, and more.
-
HATZ16519
- Air Inlet Adaptor (16-519)
- Suitable for the Z-Link
- Genuine RPB Product
HATZ16519- Air Inlet Adaptor (16-519)
- Suitable for the Z-Link
- Genuine RPB Product
-
BA2497706
- Installed in the riser tube below the pop up valve of the blast pot
- Used to stop backflow of air into the control lines and valves
- Typically used when blasting with fine or dusty abrasives
- Suits 1" riser tubes
- User will need to reduce current riser tube height to make this fit.
- Allows maximum pressure fluctuation without back flow of dust and abrasive.
- Sold individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
BA2497706- Installed in the riser tube below the pop up valve of the blast pot
- Used to stop backflow of air into the control lines and valves
- Typically used when blasting with fine or dusty abrasives
- Suits 1" riser tubes
- User will need to reduce current riser tube height to make this fit.
- Allows maximum pressure fluctuation without back flow of dust and abrasive.
- Sold individually
- Genuine Parts - Manufactured by Axxiom Manufacturing/Schmidt
-
BA840800079
- Essential Safety Item for Megablaster Pot closures
- Designed and installed on all Schmidt Bulk Pots since release in 2010
- Able to be retrofitted to Schmidt Bulk Pots in any of BlastOne Locations
- Ensures that correct operating procedures are followed when opening the fill port.
- Fits over camlock bolts and ensures all bolts remain in the lugs until all cams are fully disengaged, ensuring that the lid can not blow open
- Genuine Parts - Manufactured by Schmidt - Axxiom Manufacturing
BA840800079- Essential Safety Item for Megablaster Pot closures
- Designed and installed on all Schmidt Bulk Pots since release in 2010
- Able to be retrofitted to Schmidt Bulk Pots in any of BlastOne Locations
- Ensures that correct operating procedures are followed when opening the fill port.
- Fits over camlock bolts and ensures all bolts remain in the lugs until all cams are fully disengaged, ensuring that the lid can not blow open
- Genuine Parts - Manufactured by Schmidt - Axxiom Manufacturing
Part Number Purchase Price BA840800079 $1,400.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$1,400.00
-
-
HLNV37341
- Head liner clips are used to hold the head liner in the blast helmet
- Suits RPB Nova3 Blast Helmet
- Sold as a packet of 4
Genuine Parts - Manufactured by RPB Safety
HLNV37341- Head liner clips are used to hold the head liner in the blast helmet
- Suits RPB Nova3 Blast Helmet
- Sold as a packet of 4
Genuine Parts - Manufactured by RPB Safety
-
HLNV3735
- Head Liner Foam Padding (NV3-735)
- Sold Individually
- Suits RPB Nova3 Blast Helmet
HLNV3735- Head Liner Foam Padding (NV3-735)
- Sold Individually
- Suits RPB Nova3 Blast Helmet
-
HLNV3734
- Head Liner Kit (NV3-734) includes
- Tough polystyrene foam shell
- Soft top of head padding
- 4x HLNV37341 Clips
- Sold as a complete kit
- Suits RPB Nova3 Blast Helmet
Genuine Parts - Manufactured by RPB Safety
HLNV3734- Head Liner Kit (NV3-734) includes
- Tough polystyrene foam shell
- Soft top of head padding
- 4x HLNV37341 Clips
- Sold as a complete kit
- Suits RPB Nova3 Blast Helmet
Genuine Parts - Manufactured by RPB Safety
- Head Liner Kit (NV3-734) includes
-
APCMB8424
- Suits GX4 Gas Monitor
- Designed to keep the GX4 protect from the rigors of contractor treatment
- Includes bracket for mounting the GX4
- Weather tight to keep the rain off the electronics
- Sold Individually
- MFR # 08-424
- Genuine Parts - Manufactured by RPB Safety
APCMB8424- Suits GX4 Gas Monitor
- Designed to keep the GX4 protect from the rigors of contractor treatment
- Includes bracket for mounting the GX4
- Weather tight to keep the rain off the electronics
- Sold Individually
- MFR # 08-424
- Genuine Parts - Manufactured by RPB Safety
-
GV212800020
- 1-1/4" Heavy Duty Media Inlet Nipple with increased abrasion resistance
- Connects Metering Valve to Blast Pot
- Suits all Schmidt Abrasive Blast Pots, and any other vessel with a 1 1/4" NPT Metering Valve Ports
GV212800020- 1-1/4" Heavy Duty Media Inlet Nipple with increased abrasion resistance
- Connects Metering Valve to Blast Pot
- Suits all Schmidt Abrasive Blast Pots, and any other vessel with a 1 1/4" NPT Metering Valve Ports
Part Number Purchase Price GV212800020 $53.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$53.00
-
- 1-1/4" Heavy Duty Media Inlet Nipple with increased abrasion resistance
-
BlastOne has the parts you need to keep your Nova respirators in good working order. This section shows the hygiene kits for the Nova 2000.
- The hygiene kit includes the head dome, side wings, and inner bib collar.
- Comes in 3 head sizes - Small, Medium (Standard) and Large
- Genuine Parts - Manufactured by RPB Safety
-
HLNV3STOR
- Suits RPB Nova3 and Nova 2000 Blast Helmet
- Canvas Storage bag includes pockets for storing spare lenses and an identification card
- Used to store the blast helmet to keep it hygienic
- Has shoulder straps which are also a drawers string
- Sold Individually
- Genuine Parts - Manufactured by BlastOne
HLNV3STOR- Suits RPB Nova3 and Nova 2000 Blast Helmet
- Canvas Storage bag includes pockets for storing spare lenses and an identification card
- Used to store the blast helmet to keep it hygienic
- Has shoulder straps which are also a drawers string
- Sold Individually
- Genuine Parts - Manufactured by BlastOne
