Blasting
Showing 631–645 of 961 results
-
HT8109001When your Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Sealing Washer (810.9001).HT8109001When your Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Sealing Washer (810.9001).
-
HT6345301When your Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Hexagon Plug (634.5301).HT6345301When your Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Hexagon Plug (634.5301).
-
HT4115101When your SF1 Single Head Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Single Scaler Body (Standard and Heavy Duty) (411.5101).HT4115101When your SF1 Single Head Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Single Scaler Body (Standard and Heavy Duty) (411.5101).
-
HT6115355When your SF3 Triple Head Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Triple Scaler Body (Heavy Duty) (611.5355).HT6115355When your SF3 Triple Head Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Triple Scaler Body (Heavy Duty) (611.5355).
-
- 2" UNC (50mm) coarse Contractor thread 'C' or 1 1/4" NPSM (32mm) Fine Industrial thread 'F'
- Square thorat entry, venturi
- Tungsten carbide liner
- Urethane jacket, brass thread
- Large square blast pattern - less overlap when blasting
- Alignment ridges on jacket
-
Sized between the Tite Space and the full size nozzles, the ATA series of angle nozzles come standard with ¾" Medium Threads. They are excellent for applications requiring the operator to operate in small areas, especially when paired with a small bore whip-hose. Basic specs are:
- 3/4" (20mm) Medium male thread (other options available by special order). Can be used in standard Fine or Coarse nozzle holders by use of a thread adapter available here.
- 1/2" (13mm) throat entry
- 45° forward, 90° right angle, and 135° reverse blast pattern options available
- Some sizes are available in Double, Triple or Quad orifices
- Note: Using nozzles with multiple orifices will multiply the compressed air CFM requirement accordingly
- Tungsten carbide liner. Extended life liners for large projects available by special order.
- Short 2-1/8" length
-
BNATC360COffers Quick and Easy Setup for blast cleaning on internals of small pipes
- Blasts in a 360 degree pattern
- Can be used in pipes from 2.5 to 5 inch ID
- Machined aluminum jacket with tungsten carbide liner
- Replaceable tungsten carbide deflector tip
- Coarse, 2" Contractor Thread
- Screws directly into nozzle holder
- NOTE - requires Nylon nozzle holder with contractor threads
BNATC360COffers Quick and Easy Setup for blast cleaning on internals of small pipes- Blasts in a 360 degree pattern
- Can be used in pipes from 2.5 to 5 inch ID
- Machined aluminum jacket with tungsten carbide liner
- Replaceable tungsten carbide deflector tip
- Coarse, 2" Contractor Thread
- Screws directly into nozzle holder
- NOTE - requires Nylon nozzle holder with contractor threads
-
- 3/4" NPSM (20mm) 'M' Medium thread
- 1/2" (13mm) throat entry
- Tungsten carbide liner
- Aluminum jacket and thread
- Very short - 1-5/8" long
- Commonly used with Internal Pipe RotorBlast when blasting pipes between 8 and 11 inches in diameter, or in other hard-to-reach blasting areas
- Uses HFGFBSP nozzle washers (not included) - order separately
-
BA703199902
- Suit Schmidt Blast Pots
- Warning Decal Kit for small blast pots 0.9-10cuft
- Includes all warning labels
- Ensure your equipment has the legal liability notices clearly present
BA703199902- Suit Schmidt Blast Pots
- Warning Decal Kit for small blast pots 0.9-10cuft
- Includes all warning labels
- Ensure your equipment has the legal liability notices clearly present
-
FAN BLAST™ Fan Pattern SiALON Blast Nozzles give wide, even blast patterns, ideal for sweep blasting. Different variations include:
- 2" UNC (50mm) coarse contractor thread
- 1-1/4" ( N.P.S.M.) fine industrial thread
Also available with tungsten carbide liner - enquire for price and lead time.
At present, this nozzle is available only with a #6 orifice. An alternative nozzle type for this application, which is available in multiple orifice options, is the Raptor / Bazooka nozzle.
-
BNATLW3C
- 2" UNC (50 mm) coarse Contractor thread
- 1 1/4" (32 mm) wide throat entry, long venturi
- Tungsten carbide liner
- 'The Original' Contractor favorite
- Standard weight aluminum jacket and thread
- Use HF G32P nozzle washes (not included - order separately)
BNATLW3C- 2" UNC (50 mm) coarse Contractor thread
- 1 1/4" (32 mm) wide throat entry, long venturi
- Tungsten carbide liner
- 'The Original' Contractor favorite
- Standard weight aluminum jacket and thread
- Use HF G32P nozzle washes (not included - order separately)
-
- Ideal for blasting recesses, pipe internals, behind angles, lattices etc.
- 2" UNC (50mm) coarse Contractor thread 'C' or 1 1/4" NPSM (32mm) Fine Industrial thread 'F'
- 3/4" (20mm) throat entry
- 45° single, double or triple (equi-spaced) side outlets
- Tungsten carbide liner
- **Triple orifice nozzles have triple air & abrasive consumption!
-
VCBVRA4
- #4 Nozzle
- 90 degree
- Tungsten Carbide
- For Right Angle Workhead
VCBVRA4- #4 Nozzle
- 90 degree
- Tungsten Carbide
- For Right Angle Workhead
-
- Suits 1 1/4" blast hose
- Durable steel jacket
-
BHMXQADAPTERAdapts MegaMax coupled hoses to standard QC coupled hose.BHMXQADAPTERAdapts MegaMax coupled hoses to standard QC coupled hose.