Instruments
Showing 121–135 of 148 results
-
B1YETI30OZ
- Genuine Black Yeti Tumbler
- 30 oz capacity
- Engraved with BlastOne Logo
B1YETI30OZ- Genuine Black Yeti Tumbler
- 30 oz capacity
- Engraved with BlastOne Logo
-
INDPRBEXT
- Used to extend the reach of a DeFelsko DFT Probe
- Increases your reach up to 1.24 metres
- Collapses to only 40 cm
- Spring Adapter ensures that the probe can compress against the surface with the correct level of force.
- Probe is secured in the probe holder, which can easily articulate any direction
- Rubber grips for holding the DeFelsko® Gage
- Genuine Products - Manufactured by DeFelsko®
INDPRBEXT- Used to extend the reach of a DeFelsko DFT Probe
- Increases your reach up to 1.24 metres
- Collapses to only 40 cm
- Spring Adapter ensures that the probe can compress against the surface with the correct level of force.
- Probe is secured in the probe holder, which can easily articulate any direction
- Rubber grips for holding the DeFelsko® Gage
- Genuine Products - Manufactured by DeFelsko®
-
INDCHDTMAG10X
Use for visual assessment of scratch and gouge marks.
INDCHDTMAG10XUse for visual assessment of scratch and gouge marks.
-
GCHECKKITNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)GCHECKKITNSThe BlastOne Abrasive Testing Kit comes with six (6) officially standard (ASTM E11 Specification) stacking sieves as well as a graduated cylinder, funnel, and carrying case. The sieve trays are rated for the following particle sizes: 30 mesh (600 microns) | 40 mesh (425 microns) | 50 mesh (300 microns) | 60 mesh (250 microns) | 80 mesh (180 microns) | 100 mesh (149 microns)
-
BAHNGKit
The “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gauge, needles, and a protective leather-bound case.
- For testing air pressure at the nozzle
- Uses hyperdermic needles which insert into the blast hose to take the nozzle pressure
- Insert about 6-10ft behind blaster for most accurate reading
- Test kit includes:
- Liquid filled stainless steel pressure gage with dual pressure & efficiency scale
- Four needles and instructions
- Protective leather bound case
- Sold as a Kit
- MPN 2010-014-03
Note - there is no calibration certificate process available for this item.
BAHNGKitThe “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gauge, needles, and a protective leather-bound case.
- For testing air pressure at the nozzle
- Uses hyperdermic needles which insert into the blast hose to take the nozzle pressure
- Insert about 6-10ft behind blaster for most accurate reading
- Test kit includes:
- Liquid filled stainless steel pressure gage with dual pressure & efficiency scale
- Four needles and instructions
- Protective leather bound case
- Sold as a Kit
- MPN 2010-014-03
Note - there is no calibration certificate process available for this item.
-
INDSSTABRKITThe DeFelsko® PosiTector® SST Abrasives Test Kit measures soluble salts in blast cleaning abrasives. Designed for compliance with ASTM D4940 and ISO 11127-6, this portable kit includes everything needed to accurately assess contamination levels: two glass beakers, one plastic beaker, a plastic funnel, paper filters, 1L deionized water, 60ml certified conductivity standard, and a stainless mixing rod, all encased in a durable plastic case. Ensure the purity of your abrasives and the quality of your surface preparation with ease.
- Designed for ASTM D4940 and ISO 11127-6 compliance.
- Portable kit includes glass and plastic beakers, funnel, filters, deionized water, conductivity standard, and mixing rod.
- Enables accurate measurement of soluble salt contamination in abrasives.
- Includes certified conductivity standard for meter accuracy verification.
- All components neatly organized in a hard plastic case for field or lab use.
INDSSTABRKITThe DeFelsko® PosiTector® SST Abrasives Test Kit measures soluble salts in blast cleaning abrasives. Designed for compliance with ASTM D4940 and ISO 11127-6, this portable kit includes everything needed to accurately assess contamination levels: two glass beakers, one plastic beaker, a plastic funnel, paper filters, 1L deionized water, 60ml certified conductivity standard, and a stainless mixing rod, all encased in a durable plastic case. Ensure the purity of your abrasives and the quality of your surface preparation with ease.- Designed for ASTM D4940 and ISO 11127-6 compliance.
- Portable kit includes glass and plastic beakers, funnel, filters, deionized water, conductivity standard, and mixing rod.
- Enables accurate measurement of soluble salt contamination in abrasives.
- Includes certified conductivity standard for meter accuracy verification.
- All components neatly organized in a hard plastic case for field or lab use.
-
INE130SC1
- For analysis of chloride ions, ferrous ions and pH level
- Chloride Ion Detection Threshold: approx 40 ppm
- Ferrous Ion Detection Threshold: approx 3 ppm
- pH measurement range: 4 to 9 verified by color scale
- Complete kit supplied with graduated cylinder, beakers, tweezers, water demineralizer cartridge, cotton balls, chloride ion titration strips, ferrous ion titration strips, ruler, instructions and hard cover carry-case
- Surface Contamination Analysis Test (SCAT) Kit
- 'Swab method' used in accordance with AS1627-1, AS3894-6 Standard
INE130SC1- For analysis of chloride ions, ferrous ions and pH level
- Chloride Ion Detection Threshold: approx 40 ppm
- Ferrous Ion Detection Threshold: approx 3 ppm
- pH measurement range: 4 to 9 verified by color scale
- Complete kit supplied with graduated cylinder, beakers, tweezers, water demineralizer cartridge, cotton balls, chloride ion titration strips, ferrous ion titration strips, ruler, instructions and hard cover carry-case
- Surface Contamination Analysis Test (SCAT) Kit
- 'Swab method' used in accordance with AS1627-1, AS3894-6 Standard
-
The Testex tape process of measuring surface profile has been used for over 50 years. It is a simple, reliable, and repeatable way of determining surface profile parameters. DeFelsko acquired the Testex tape line and incorporated it into their range of instruments, for increased compatibility and greater convenience for inspectors. Tape options include the following:
- Conventional Testex Press-O-Film Tape grades.
- Use with analog spring micrometers or with the PosiTector RTR H probe.
- Available in 4 versions:
- Coarse Minus. (for 0.5 - 1.0 mils / 12 - 25 µm)
- Coarse. (for 0.8 - 2.5 mils / 20 - 64 µm)
- X-Coarse. (for 1.5 - 4.5 mils / 38 - 115 µm)
- X-Coarse Plus (for 4.6 - 5.0 mils / 116 - 127 µm)
- Optical Grade Testex Press-O-Film Tape Grades
- Use with PosiTector RTR 3D probe. Provides higher quality surface data files (.sdf) than conventional replica tape. Available in 2 versions.
- Coarse (for 0.8 -2.5 mils / 20 - 64µm)
- X-Coarse (for 1.5 - 4.5 mils / 38 - 115 µm)
- Use with PosiTector RTR 3D probe. Provides higher quality surface data files (.sdf) than conventional replica tape. Available in 2 versions.
- Conventional Testex Press-O-Film Tape grades.
-
INEBSPG
- Visual representation of rust and coating preparation grades on steel substrates
- Similar to SSPC-VIS 1 Visual Standards and Reference Photographs
- Handy flip-top, wire bound, reference book
- Provides a visual comparison with SSPC standards. Full color photographs. Wipe-clean gloss pages. Flip top wire binding. Supplied in a protective pouch.
- Not a certified visual standard - use as a guide
INEBSPG- Visual representation of rust and coating preparation grades on steel substrates
- Similar to SSPC-VIS 1 Visual Standards and Reference Photographs
- Handy flip-top, wire bound, reference book
- Provides a visual comparison with SSPC standards. Full color photographs. Wipe-clean gloss pages. Flip top wire binding. Supplied in a protective pouch.
- Not a certified visual standard - use as a guide
-
INE1342
- Supplied in a pack of 4 test kits
- Abrasive Chloride measurement range 1 ppm to 50 ppm
- Compact, portable, two minute field test
- Safe handling - no needles or syringes
INE1342- Supplied in a pack of 4 test kits
- Abrasive Chloride measurement range 1 ppm to 50 ppm
- Compact, portable, two minute field test
- Safe handling - no needles or syringes
-
INE1341
- Use to measure chlorides on surfaces
- Also known as salt test kits
- Sample time of 1.5 minutes
- Sold as a pack of five (5) test kits
- Surface salt extraction efficiency up to 98%
- Measurement range 5 ppm to 200 ppm
- Used in accordance with ISO8502-5, ISO8502-6, AS1627-4 Standards
- Genuine parts - manufactured by ChlorRid
INE1341- Use to measure chlorides on surfaces
- Also known as salt test kits
- Sample time of 1.5 minutes
- Sold as a pack of five (5) test kits
- Surface salt extraction efficiency up to 98%
- Measurement range 5 ppm to 200 ppm
- Used in accordance with ISO8502-5, ISO8502-6, AS1627-4 Standards
- Genuine parts - manufactured by ChlorRid
-
INE130SC3
- Used as part of the SCAT Kit for measuring Ferrous ion content in the titration solution
- Replacement Ferrous Ion Titration Strips
- Come in a Bottle of 100
INE130SC3- Used as part of the SCAT Kit for measuring Ferrous ion content in the titration solution
- Replacement Ferrous Ion Titration Strips
- Come in a Bottle of 100
-
INE134RKIT
- Refill kit for CSN Test Kit
- Used to measure surface contamination from Chlorides, Sulphates and Nitrates
- Comes in a Pack of 5 Tests
- Genuine Parts - Manufactured by ChlorRid
INE134RKIT- Refill kit for CSN Test Kit
- Used to measure surface contamination from Chlorides, Sulphates and Nitrates
- Comes in a Pack of 5 Tests
- Genuine Parts - Manufactured by ChlorRid
-
INDDTKIT
The PosiTest® DT Dust Tape Kit assesses the quantity and size of dust particles on blast cleaned surfaces. It includes the following:
- Roll of ISO 8502-3 Tape (25 mm wide)
- Scissors
- Illuminated 10x Magnifier (with batteries)
- Dust Test Comparator
- Transparent Display Boards
- Report Forms (pack of 25)
- Multi-Language Instruction Manual
- Hard Shell Plastic Case with custom foam insert
NOTE: PosiTest DT Dust Tape Roller is sold separately.
INDDTKITThe PosiTest® DT Dust Tape Kit assesses the quantity and size of dust particles on blast cleaned surfaces. It includes the following:
- Roll of ISO 8502-3 Tape (25 mm wide)
- Scissors
- Illuminated 10x Magnifier (with batteries)
- Dust Test Comparator
- Transparent Display Boards
- Report Forms (pack of 25)
- Multi-Language Instruction Manual
- Hard Shell Plastic Case with custom foam insert
NOTE: PosiTest DT Dust Tape Roller is sold separately.
-
IND6000PRINT
BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more.
This printer is compact and portable and is compatible with many DeFelsko PosiTector instruments. Additional details as follows:
- Bluetooth wireless technology for easy data transfer from PosiTector® Advanced models
- Fast print speed of 6mm/s with ink-free thermal paper
- Rechargeable Lithium-Ion battery and universal AC adapter included
- Lightweight and compact design for portability
- One year warranty for peace of mind
- Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS
MPN: PRINTERBT
IND6000PRINTBlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more.
This printer is compact and portable and is compatible with many DeFelsko PosiTector instruments. Additional details as follows:
- Bluetooth wireless technology for easy data transfer from PosiTector® Advanced models
- Fast print speed of 6mm/s with ink-free thermal paper
- Rechargeable Lithium-Ion battery and universal AC adapter included
- Lightweight and compact design for portability
- One year warranty for peace of mind
- Compatible with PosiTector® 6000, 200, SPG, RTR H, RTR 3D, DPM, IRT, SST, UTG, SHD, BHI, and GLS
MPN: PRINTERBT