Replacement Item
Showing 1–15 of 57 results
-
INDHHDCEXTROD
- 17" Rod
- For use with PosiTest HHD C
- Genuine DeFelsko product
INDHHDCEXTROD- 17" Rod
- For use with PosiTest HHD C
- Genuine DeFelsko product
-
INDLPDEXT
Extend your PosiTest® LPD base an additional 1 foot with the extension rod.
- Includes 1 rod
NOTE: Multiple extension rods can be connected together to extend reach further
INDLPDEXTExtend your PosiTest® LPD base an additional 1 foot with the extension rod.
- Includes 1 rod
NOTE: Multiple extension rods can be connected together to extend reach further
-
INDHHDCVERIFY
- Use to verify continuous DC holiday detectors
- Measurement range of 0.5 to 30 kV
- Portable and Lightweight
- No external power source required
- Device comes complete with the following:
- 6" Ground Wire
- 3 AAA Batteries
- Instructions
- Long Form Certificate of Calibration traceable to NIST
- 2 year warranty
INDHHDCVERIFY- Use to verify continuous DC holiday detectors
- Measurement range of 0.5 to 30 kV
- Portable and Lightweight
- No external power source required
- Device comes complete with the following:
- 6" Ground Wire
- 3 AAA Batteries
- Instructions
- Long Form Certificate of Calibration traceable to NIST
- 2 year warranty
-
INDDTROLLER
Optional spring-loaded Dust Tape Roller, used to apply recommended constant force.
INDDTROLLEROptional spring-loaded Dust Tape Roller, used to apply recommended constant force.
-
INDLPDACC
This pack includes adaptable sponge hardware and accessories to convert the Basic Kit to the Complete Kit. It includes the following:
- Adaptable Sponge Hardware
- Roller
- Internal Diameter
- 8" x 8" (20 cm x 20 cm) Sheet Sponge for custom usages
- Wetting Agent
- Extension Accessories
- Extension rods provide an additional 2' (0.6 m) of reach
- Universal adapters to extend existing paint rollers and poles
- 40' (12 m) Ground Wire
- Magnetic Grounding Post
- Hard Shell Carrying Case
INDLPDACCThis pack includes adaptable sponge hardware and accessories to convert the Basic Kit to the Complete Kit. It includes the following:
- Adaptable Sponge Hardware
- Roller
- Internal Diameter
- 8" x 8" (20 cm x 20 cm) Sheet Sponge for custom usages
- Wetting Agent
- Extension Accessories
- Extension rods provide an additional 2' (0.6 m) of reach
- Universal adapters to extend existing paint rollers and poles
- 40' (12 m) Ground Wire
- Magnetic Grounding Post
- Hard Shell Carrying Case
- Adaptable Sponge Hardware
-
INDLPDCBLDWAND
Converts the PosiTest® LPD Low Voltage Pinhole Detector into a cabled wand style unit. Includes the following:
- Remote Wand Handle
- Compatible with Rectangular and Roller Sponge Hardware
- Compact size - only 5.3 inches (13.5 cm)
- Includes handle and 5 foot (1.5 m) hot-wire cable, making it easier to reach difficult-access areas
INDLPDCBLDWANDConverts the PosiTest® LPD Low Voltage Pinhole Detector into a cabled wand style unit. Includes the following:
- Remote Wand Handle
- Compatible with Rectangular and Roller Sponge Hardware
- Compact size - only 5.3 inches (13.5 cm)
- Includes handle and 5 foot (1.5 m) hot-wire cable, making it easier to reach difficult-access areas
- Remote Wand Handle
-
INDLPDVERIFY
Use to verify electrical resistance with the PosiTest® LPD.
- Includes decage box, cable, and calibration verification procedure.
NOTE: To verify voltage, a calibrated multimeter (NOT included) is required.
INDLPDVERIFYUse to verify electrical resistance with the PosiTest® LPD.
- Includes decage box, cable, and calibration verification procedure.
NOTE: To verify voltage, a calibrated multimeter (NOT included) is required.
-
INDHHDCBATTERY
- Replacement Li-ion batteries
- Use for PosiTest HHD C
- Pack of 4
INDHHDCBATTERY- Replacement Li-ion batteries
- Use for PosiTest HHD C
- Pack of 4
-
INDDTREPORT
Use with the PosiTest® DT. Includes the following:
- Dust Test Comparator (1)
- Transparent Display Board (1)
- Report Forms - Pack of 25 (4)
INDDTREPORTUse with the PosiTest® DT. Includes the following:
- Dust Test Comparator (1)
- Transparent Display Board (1)
- Report Forms - Pack of 25 (4)
-
INDLPDWET
When pinholes are too small that the water cannot reach the conductive substrate underneath, the use of a wetting agent can help lower surface tension, allowing the solution to better penetrate the pinhole.
- Includes two 60mL bottles
INDLPDWETWhen pinholes are too small that the water cannot reach the conductive substrate underneath, the use of a wetting agent can help lower surface tension, allowing the solution to better penetrate the pinhole.
- Includes two 60mL bottles
-
Replacement Tape for Defelsko PosiTest Cross Hatch Adhesion Testers available as follows:
- Tape for ISO 2409 Kit
- 1 inch x 72 yards / roll
- Tape for ASTM D3359 Kit
- 1 inch x 90 yards / roll
Sold by the roll
- Tape for ISO 2409 Kit
-
INDSPG1T
- 30° angle tip
- Composed of tungsten carbide
- Includes replacement tool
INDSPG1T- 30° angle tip
- Composed of tungsten carbide
- Includes replacement tool
-
INDDPMHSP
- Hand-held surface temperature probe
- Use for spot checking hard-to-reach surfaces
- For use with PosiTector DPMS probes only
INDDPMHSP- Hand-held surface temperature probe
- Use for spot checking hard-to-reach surfaces
- For use with PosiTector DPMS probes only
-
INCASEINSP
- Durable and convenient storage solution
- Ample space and well-organized interior
- Portable design for easy transport
- Reliable zipper closure for added security
- Protects your inspection tools during storage and transport
INCASEINSP- Durable and convenient storage solution
- Ample space and well-organized interior
- Portable design for easy transport
- Reliable zipper closure for added security
- Protects your inspection tools during storage and transport