My Account
Rental & Site Equipment
Showing 1–15 of 52 results
-
Portable Sponge-Jet recyclers are specially designed to reduce abrasive costs and increase sustainability when sponge blasting. Equipment highlights as follows:- Size options:
- 35 series - supports up to two 100HP or 170 Series feed units.
- 50 series - supports the B-Vac integrated system. (Rarely used as a stand-alone unit.)
- 70 series - supports up to two 470 Series feed units.
- Screening:
- All units come with 2 screens. The 70 series offers an optional 3rd screen for enhanced recycling control. (The 70 series units pictured here are 2 screen units.)
- Power:
- All units available in either Pneumatic or Electric power.
- Size options:
-
Coating Inspectors - save time and cost by choosing a deluxe PosiTector® coating inspection kit. Details on the most popular configurations are as follows:
- Standard Instrument Package:
- Includes PosiTector 6000 Standard body, DPM and SPG probes and choice of coating thickness probe.
- Advanced Instrument Package:
- Same as Standard Package but with Advanced body.
- Extreme Package:
- Same as Advanced Inspection Package with added DPM-L data-logging climatic condition probe, RTR-H replica tape reader and Testex X-tra coarse tape. The FS (standard-range, cabled, ferrous) is the coating thickness probe included in this package.
- Each Package also includes: a carry case, calibration certificate, plastic shims, and more!
For custom configurations, contact us by chat, phone, or email for prompt response.
- Standard Instrument Package:
-
The PosiTector® DPM - DeFelsko's solution for measurement of climatic conditions for industrial coating applications. Versatile and capable, these environmental measuring instruments have the following highlights:
- Familiar. Built on the tried-and-true PosiTector® gauge/body platform design with interchangeable probes.
- Capable. Measures and records environmental conditions including:
- Relative Humidity (RH)
- Air Temperature
- Surface Temperature
- Dew Point temperature
- Surface/Dew Point Delta
- Wind speed (one model only)
- Wet-Bulb (when used with Advanced Bodies only)
- Configurable. Available as probes-only (to use with an existing gage/body), or in packages with a new gage body, these DPM probes are available as:
- DPM Integral, with direct-contact surface thermometer
- DPMIR Integral, with infrared surface thermometer, for use on moving parts, very hot parts, etc., where direct contact is not possible.
- DPMS Integral, with cabled, magnetic surface temperature sensor for continuously logging surface temperatures. Also available for this model are 2 options:
- A liquid temperature probe, for measuring paint temperature prior to application
- A hand-held surface temperature probe, for spot-checking hard-to-reach areas.
- DPMA Integral, with all standard features plus a wind-speed indicator
- DPMD Cabled, with ½" NPT threads for insertion into pipe and other areas that can't be accessed by other versions.
-
- The Nova 3 Blast Helmet is the industry #1 for operator comfort
- Has comfort padding inside like a motorcycle helmet, which means it distributes the weight evenly, and also turns with your head
- Gives up to 20dB noise attenuation
- NIOSH Safety Approval with a 1000 APF (assigned protection factor)
-
Sold as a complete kit with the following variations:
-
Cape Options:
- Standard Length Nylon Cape
- Extended Nylon Cape
- Standard Leather Cape
- Extended Leather Cape
- XL Blast Jacket
- XXL Blast Jacket
-
Climate Options:
-
Supplied air offers:
- C40 Heating and Cooling
- Cool Air Tube
- Hot Air Tube
- Air Control Valve
-
PAPR offers:
- Air Control Valve only
- (PAPR version is intended for low dust applications such as pot tending, inspection, etc.)
-
Supplied air offers:
-
Cape Options:
- Genuine Products – Manufactured by RPB Safety
-
Poly sheeting is an everyday protective product for painters and other trades. Key variables / features include:
- Size specifications. Many sizes and thicknesses are available. If the selection shown doesn't include what you need, contact us for a quick price and availablity on your preferred version.
- Flammability. Available in low-cost non-FR or in flame resistant (tested to NFPA701).
- Colors. Generally stocked in clear (white for FR), it is also available in white, black and yellow.
-
SBPL05WElevate your paint booth's efficiency and safety with the Liftman Pneumatic Paint Booth Personnel Manlift, Twin Wheel Version, SKU: SBPL05W. This pneumatic lift is ideal for explosion-sensitive areas, reaching a working height of up to 14' 9".
- Twin Wheel Version for stable and smooth operation.
- Pneumatically operated, ensuring safety in explosive environments.
- Self-centering steering for effortless maneuverability.
- CE, CAS, UL certified and ATEX compliant.
SBPL05WElevate your paint booth's efficiency and safety with the Liftman Pneumatic Paint Booth Personnel Manlift, Twin Wheel Version, SKU: SBPL05W. This pneumatic lift is ideal for explosion-sensitive areas, reaching a working height of up to 14' 9".- Twin Wheel Version for stable and smooth operation.
- Pneumatically operated, ensuring safety in explosive environments.
- Self-centering steering for effortless maneuverability.
- CE, CAS, UL certified and ATEX compliant.
Part Number Purchase Price SBPL05W $34,250.00 Liftman Pneumatic Paint Booth Personnel Manlift, Twin Wheel Version
Part #SBPL05W
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$34,250.00
-
-
This general-purpose nozzle was designed for everyday use, only better - it lasts longer and offers greater ease of use! It features the following: Click for Buying Guide
- Performance characteristics:
- Venturi design provides up to 40% faster production than straight bore versions.
- Thread type & Orifice Size options:
- Contractor 2" (50mm)
- Fine 1-¼" (32mm)
- Orifice size options: 3, 4, 5, 6, 7, 8
- Liner:
- Silicon nitride, provides longer life and lighter weight than tungsten carbide.
- Jacket:
- All-polyurethane – reduces ‘jams’ in metal nozzle holders
- Shock absorbent, lightweight urethane jacket protects the blast nozzle liner
- Design:
- 1" throat entry on #3 and #4 Contractor thread AND all Fine thread options
- 1-¼" throat entry on #5, 6, 7, and 8 Contractor threads
- Additional notes:
- Approximately half the weight of standard tungsten carbide nozzles.
- Although the up-front cost is higher than tungsten carbide, the longer life Ultra-Tuff offers same or better total cost of ownership.
- Performance characteristics:
-
Designed with an extra-long venturi and concentrated blast pattern, the Hyper (aka XL or Saber) nozzle increases performance substantially. Additional details as follows: Click for Buying Guide
- Performance characteristics:
- Up to 30% faster coating removal and/or
- Allows greater stand-off distance (reduces need to bend over when blasting tank floors, allows greater reach, etc.)
- Thread types & Orifice Size options:
- Contractor 2" (50mm)
- Fine 1-¼" (32mm)
- Orifice size options: 5, 6, 7, 8, & 10
- Liner:
- SiALON silicon nitride, provides longer life and lighter weight than tungsten carbide.
- Jacket:
- All aluminum, non-slip knurled finish
- Design:
- 1-¼" throat entry, extended venturi, 12 inches long
- Performance characteristics:
-
The PosiTest® HHD - DeFelsko's solution for detection of holidays, porosity, pinholes, leaks and other discontinuities in coatings and linings that are more than 10 mils (250 microns) thick.
- Advanced pulse or continuous DC technology
- Lightweight and ergonomic design
- Auto voltage calculator based on coating thickness
- Multiple electrode options with custom availability
- Long Form Certificate of Calibration included
- PosiTest HHD Kit (2 versions)
- Stick-type with Pulsed DC Output
- 72 Wh Li-ion battery pack with built-in charge indicator
- Durable Pelican Storm Case
- 20" Electrode Rod (or substitute 5" Electrode, with suffix -S after the part number)
- Shoulder Strap
- 25' earthing cable and smart charger with universal AC voltage input
- PosiTest HHD Basic Kit (same as above HHD kit except for the following)
- 36 Wh Li-ion battery pack instead of 72 Wh
- Hard Shell Case instead of Pelican Case
- 5" Electrode Rod
- (Note - the above HHD instruments can be converted to wand configurations, aiding in testing hard-to-reach areas, by adding the optional HHDWAND Handheld Wand.)
- PosiTest HHD C Kit
- Wand-type with Continuous DC Output
- 18650 Li-ion Batteries (4)
- Hard Shell Case
- Extension rod is not required, but available
- Rolling Spring Electrodes, and Conductive Paddle to aid in precise location of holidays
- Flat Wire Brush Electrodes
- Half-Circle Brush Electrodes
- Electrode Adaptors, makes other brands of electrodes compatible with the HHD
- Electrode Rods (for HHD) and Extension Rod (for HHD C)
-
BlastOne offers all DeFelsko testing equipment, accessories, and supplies. Pinhole detectors (aka Spark Testers) such as this PosiTest® LPD, detect holidays, pinholes, and other discontinuities on metal and concrete substrates. The DeFelsko LPD Low Voltage series is designed for coating thickness up to 20 mils. Some of the features include:
- GroundSense™, to visually confirm instrument is properly grounded
- 4 voltage operation ranges
- Weatherproof, dustproof, and shockproof
- Long Form Certificate of Calibration included
- PosiTest LPD Basic Kit
- Base Tube
- 3 AAA Batteries
- Rectangle Sponge Hardware
- Rectangle Sponge
- 15' (4.5 m) Ground Wire
- Insulating Collar
- Ear Bud
- Wrist Strap
- Carabiner
- Hard Shell Case
- PosiTest LPD Complete Kit
- Includes all contents of Basic Kit, plus:
- Adaptable Sponge Hardware
- Rectangle (Flat)
- Roller
- Internal Diameter
- Additional 8" x 8" (20 cm x 20 cm) Sheet Sponge for custom usages
- Wetting Agent
- Extension Accessories
- Extension rods provide an additonal 2' (0.6 m) of reach
- Universal adapters to extend existing paint rollers and poles
- 40' (12 m) Ground Wire
- 15' (4.5 m) Hot Wire
- Magnetic Grounding Post
- Adaptable Sponge Hardware
- Includes all contents of Basic Kit, plus:
-
FREE Shipping 30 Day Money-Back Guarantee | Free Returns 90 Day Manufacturer Warranty
- Compact contractor size, highly portable with good productivity for smaller projects
- When using premium garnet media, this pot will last for up to 1 hour before you need to refill
- Capacity of 3.5 cu ft, which equates to about 500 pounds of dense media like premium GMA garnet
- Pressure Rating: 150psi
- Blast Pot
- Deadman Control System with 50 feet of control line and handle
- Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in order comments field.
-
Premium reinforced scaffold sheeting is used for projects requiring full containment and offers the following:
- White poly / polyethylene construction with blue eyelet bands
- Blue eyelet reinforcing bands have conveniently spaced holes, used to tie the sheeting to the scaffolding
- Bungees and other accessories and attachment options are available for this purpose
- Resistant to tears, water, and mildew
- Available in 8 or 12 mil thicknesses
- Available in FR or non-FR ratings
- Stocked in common sizes. Special sizes available by special order.
-
Top choice for jobs requiring 100% containment, such as lead remediation, etc.
- Coated 420 denier nylon material (6 oz/yd) or commonly called poly
- Normally sold with FR treatment. Non-FR available by special order at a 10% savings - call for lead times.
- Standard construction includes sewn grommets positioned at 2 foot intervals along the web-reinforced seams, hems, and overlap flaps.
- The second dimension on the tarp size is always the length of the interior seams.
-
For projects where a windscreen is desireable, and full containment is not required.
- 85% Mesh poly fabric, allows slight airflow through and helps keep most dust and debris inside
- Protects from debris, wind and UV rays
- Both non-FR and FR versions available
- Gromments around perimeter and in center
-
VAVECTOR721AVAILABLE FOR RENTAL OR PURCHASE
- 235HP T4 Diesel Engine
- 3660 CFM, 28" static pressure
- Mounted on 3-axle road legal trailer
- Will convey between 15-20 tons of abrasive per hour
- Primary Filtration - Coated Bags, pulse air cleaned
- Secondary Filtration - Pleated Cartridge
- Max Vacuum hose 6"
- Empty weight 13,950lbs
- Dimensions 21' L x 8'2.5" W x 11'4" H
VAVECTOR721AVAILABLE FOR RENTAL OR PURCHASE- 235HP T4 Diesel Engine
- 3660 CFM, 28" static pressure
- Mounted on 3-axle road legal trailer
- Will convey between 15-20 tons of abrasive per hour
- Primary Filtration - Coated Bags, pulse air cleaned
- Secondary Filtration - Pleated Cartridge
- Max Vacuum hose 6"
- Empty weight 13,950lbs
- Dimensions 21' L x 8'2.5" W x 11'4" H
Part Number Purchase Price VAVECTOR721 $243,000.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$243,000.00
-
