All Products
Showing 391–405 of 1343 results
-
IPC1003
- Replacement brake housing for RotorBlast Internal Pipe Blasting Tool
IPC1003- Replacement brake housing for RotorBlast Internal Pipe Blasting Tool
-
IPC1015
- Replacement rear end plate for RotorBlast Internal Pipe Blasting Tool
IPC1015- Replacement rear end plate for RotorBlast Internal Pipe Blasting Tool
-
FPSP25
- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
FPSP25- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
-
HTRAGWT
- Highly absorbent
- Sold as box of 220 pre-cut rags
- Cotton, pre-washed
- Recycled material
- Random cuts
- Low lint
- 25lb total weight
HTRAGWT- Highly absorbent
- Sold as box of 220 pre-cut rags
- Cotton, pre-washed
- Recycled material
- Random cuts
- Low lint
- 25lb total weight
-
-
IPCRSM900
- Suited to coat pipe internals 12" - 35" (300mm - 875mm)
- 3,600 psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems are sold bare - hose and controls purchased separately
IPCRSM900- Suited to coat pipe internals 12" - 35" (300mm - 875mm)
- 3,600 psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems are sold bare - hose and controls purchased separately
-
IPCRSM300
- Suited to coat internal pipes 5" - 12" (125mm - 300mm)
- 3,00psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems are sold bare - hose and controls sold separately
IPCRSM300- Suited to coat internal pipes 5" - 12" (125mm - 300mm)
- 3,00psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems are sold bare - hose and controls sold separately
-
IPCRSM100
- Suited for use on pipes 3" - 5" (75mm - 125mm)
- 3,600psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems sold bare - hose and gun ordered separately
IPCRSM100- Suited for use on pipes 3" - 5" (75mm - 125mm)
- 3,600psi rated
- At least a 30:1 airless sprayer should be used - ideally a 40:1 system
- Systems sold bare - hose and gun ordered separately
-
IPC80300
- ConeSpray with Carriage - for 5"-10" (125mm - 250mm) ID pipe
- "Hollow cone' spray pattern
- Includes spray tip, shut-off valve, centering carriage
- 3,600psi pressure rating
- Connects to high-pressure airless sprayer pump - not included
- Not suited to spray UHS (Ultra High Solids) paints
IPC80300- ConeSpray with Carriage - for 5"-10" (125mm - 250mm) ID pipe
- "Hollow cone' spray pattern
- Includes spray tip, shut-off valve, centering carriage
- 3,600psi pressure rating
- Connects to high-pressure airless sprayer pump - not included
- Not suited to spray UHS (Ultra High Solids) paints
-
INEBP45
- Tool used to identify the presence of water, oil or other contaminants in compressed air used for blasting and coating applications
- In accordance with ASTM D 4285 - attach a single piece of blotter paper to a solid backing using tape
- Paper can be marked upon with critical test information for later documentation and/or reference
- Pre-cut 6" x 6" pieces
INEBP45- Tool used to identify the presence of water, oil or other contaminants in compressed air used for blasting and coating applications
- In accordance with ASTM D 4285 - attach a single piece of blotter paper to a solid backing using tape
- Paper can be marked upon with critical test information for later documentation and/or reference
- Pre-cut 6" x 6" pieces
-
IPC80125
- Heavy-duty coating unit
- Ideal for use on 3"-5" (75mm-125mm) pipe internals
- Centering carriage, spray tip and shut-off valve included
- Pressured rated = 3,600psi
- Fastens directly to high-pressure (HP) airless spray pump
IPC80125- Heavy-duty coating unit
- Ideal for use on 3"-5" (75mm-125mm) pipe internals
- Centering carriage, spray tip and shut-off valve included
- Pressured rated = 3,600psi
- Fastens directly to high-pressure (HP) airless spray pump
-
DMMEM200
- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
DMMEM200- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
-
- Robots made by Blastman Robotics specifically for Blastroom applications
- Available as 4-Axis, 7-Axis or 8-Axis.
- Available as Wall Mount or Gantry Mount
- Optional Man cabin for manual blasting which can come mounted on the blasting arm, or as a separate cabin
- 20+ years of installation and robotic experience
- Read here for more pictures of Blastman Blasting Robots
-
- RPB blast suits enhance worker comfort and protect the wearer from abrasive rebound.
- The heavy-duty breathable cotton back helps keep you cool.
- Robust nylon zipper with protective cover
- Heavy-duty nylon gives extra protection to the arms and fronts of legs and has abrasion resistance for a longer life.
- Elasticized waist for a comfortable fit (takes the weight off the operator’s shoulders).
- Elasticized wrist and adjustable ankle cuffs to keep abrasive out.
- Seven different sizes from S to XXXXL.
- Triple stitched.
- Optional Knee Pads are available.
- Suit does not come with a hood.
- Sold Individually
- Genuine Products - Manufactured by RPB Safety
- See also BlastOne's new BlasterAlls Blast Suits
-
- Heavy-duty leather front for protection of arms and legs, extending coverall life.
- Strong cotton back for ventilation and comfort in hot climates.
- Ties at sleeves for adjustable fit, keeping out residue, media, and dust.
- Optional leather gauntlet gloves for added protection of hands and wrists.
- Available in six different sizes, from S to 3XL, ensuring a suitable fit for every operator.
- Press stud closures and Velcro strip fastening for double protection from grit ingress and resistance to damage from steel grit.
- Compatible with Nova3 blast helmets and blast capes (HLNV3752 or HLNV3753) for full leather front protection.
- Designed to meet the most stringent government guidelines.
- Tough cowhide covers ensure protection, while strong cotton back enables suit to ventilate for comfort in hot climates.
- Leather fronted sandblasting suits guarantee protection from harmful abrasive ricochet and momentary direct impact.
- Heavy-duty half leather fronted abrasive blasting suit (leather front extends from the waist down).
- Comfortable 'breathable' cotton back.
- Adjustable wrist and ankle straps.
- Front press stud and Velcro strip fastening.
- Most commonly used when blasting with steel grit media.
- Sold individually.