My Account
All Products
Showing 406–420 of 1329 results
-
From the makers of the Nova Respirators!
- GVS Half Masks are made from TPE and are hypoallergenic and non-irritating.
- Extremely lightweight and comfortable.
- Each mask includes the initial set of filters installed and is ready-to-use.
- Price shown per-each. Packed 8 per case, with case discount.
- Multiple filter versions available as follows:
- OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
- OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates.
- Solvents
- Chlorine and Chlorine Dioxide
- Hydrogen Chloride and Hydrogen Fluoride
- Sulphur Dioxide
- Organic Vapors
- Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gases. All acid gases above, plus:
- Ammonia
- Formaldehyde
- Hydrogen Sulfide
- Methylamine
- Multi-Gas / P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates.
- Reuse your respirator over and over again with the standard-profile line of GVS replacement filters.
- NIOSH Approved TC-84A-8062.
NOTE - This is the standard profile series. Low-profile Elipse masks are also available.
As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adapter is available to facilitate this testing.
-
This two-toned glove is constructed of neoprene and rubber, and is double dipped for added protection. It has the following specifications:
- 27 mil thickness - medium weight for greater protection against mechanical hazards
- Cotton Flock lined for sweat absorption
- Diamond-pattern finish for improved grip on both wet and dry surfaces
- Intended for plant maintenance, janitorial use, and general chemical handling. See Documents tab for chemical protection chart.
-
This all-purpose knit glove offers excellent cut resistance with good dexterity and grip. It has the following specifications:
- ANSI cut level A6
- NBR foam finish
- 13 gauge gray HPPE (Steel / Nylon / Spandex / Polyester) knit construction
- Black palm dip
-
This knit glove is an excellent general purpose glove with good dexterity and grip. It has the following specifications:
- ANSI cut level 1
- NBR foam finish
- 15 gauge gray Nylon / Spandex knit construction
- Black palm dip
-
Experience enhanced comfort and safety with the Bullard DC-70 series Air-Fed Cool Vest (SKU: P-BLDCOOLVEST), designed to integrate seamlessly with Bullard cooling tubes. This vest is a must-have for professionals using respirators, especially when paired with the Bullard Dual-Cool tube. For non-respirator use, it's compatible with the AC1000 or CT30DC personal cooling devices. Constructed with a gray nylon outer shell and a breathable cotton inner shell, it's available in versatile sizes: Medium/Large, XL/XXL, and 5XL.
- Compatible with Bullard cooling tubes for enhanced safety
- Ideal for use with respirators, especially with the Dual-Cool tube
- Also works with AC1000 or CT30DC cooling devices when used without a respirator
- Durable gray nylon outer shell
- Comfortable, breathable cotton inner shell
- Available in sizes Medium/Large, XL/XXL, and 5XL
-
HAB20TICHThe Bullard 20TIC Hood is specifically designed for use with hard hats, airline systems, or Powered Air Purifying Respirator (PAPR) blower assemblies. Crafted from Tychem QC for robust splash protection against a spectrum of chemical agents, this hood is ideal for applications in chemical/pesticide handling, spray painting/coating, and nuclear operations. Featuring a wide-angle lens for unparalleled visibility, a patented inflatable neck cuff for enhanced comfort and protection, and NIOSH certification, this durable yet economical hood meets the rigorous demands of industrial environments.
- Compatible with hard hats, PAPR, or Supplied Air Respiratory Systems
- Made from Tychem QC for superior chemical splash protection
- Wide-angle lens for industry-leading visibility
- Patented inflatable neck cuff design for comfort and airflow
- Reusable yet economical for varied application needs
- NIOSH certified for safety and reliability
HAB20TICHThe Bullard 20TIC Hood is specifically designed for use with hard hats, airline systems, or Powered Air Purifying Respirator (PAPR) blower assemblies. Crafted from Tychem QC for robust splash protection against a spectrum of chemical agents, this hood is ideal for applications in chemical/pesticide handling, spray painting/coating, and nuclear operations. Featuring a wide-angle lens for unparalleled visibility, a patented inflatable neck cuff for enhanced comfort and protection, and NIOSH certification, this durable yet economical hood meets the rigorous demands of industrial environments.- Compatible with hard hats, PAPR, or Supplied Air Respiratory Systems
- Made from Tychem QC for superior chemical splash protection
- Wide-angle lens for industry-leading visibility
- Patented inflatable neck cuff design for comfort and airflow
- Reusable yet economical for varied application needs
- NIOSH certified for safety and reliability
-
In-Helmet communication systems make communication between a blaster/operator and other team members much easier and safer. RPB respirators are modular, meaning they can be upfitted with this option at any time. Several options available as follows:
- Z4 Comms-Link™ Upgrade Kit, includes noise-cancelling microphone, PTT button, and 15-848 padding kit for the Z4.
- Z-Link / T-Link Comms-Link™ Upgrade Kit, includes noise cancelling microphone, PTT button, and 16-520-S padding kit to fit either the Z-Link or T-Link.
- Z-Link / T-Link / Z4 Headset Package, includes noise-cancelling microphone and PTT button. This kit does not include padding, and assumes that it will be used with previously-installed padding. (If you need padding with the kit, purchase one of the Upgrade versions above. It can also be purchased separately - see Repair Parts list.)
- Nova 3 NovaTalk™ Upgrade Kit, including noise-cancelling microphone, PTT button, and padding for the Nova 3.
- Nova 2000 NovaTalk™ Upgrade Kit. Including noise-cancelling microphone, PTT button, and padding for the 2000.
- NovaTalk™ R-Tex Headset with PTT, designed for high-noise applications, such as Pot Tender.
- NovaTalk™ R-Tex Headset without PTT, designed for high-noise applications, such as Pot Tender.
Note: A separate Radio Connection Cable must be purchased to connect to your existing 2-way radio system. Note: These systems are not rated Intrinsically Safe. If Intrinsically Safe versions are required, contact us for availability and pricing.
-
Replacement filter cartridges to suit GVS Elipse and Integra Low-Profile half masks.
- Standard P100. These filters will remove up to 99.97% of particles and contaminants down to 0.3 microns.
- Enhanced P100 w/ activated charcoal. Designed to remove nuisance odors along with P100 filtration.
- OV / P100. Protects against organic vapors and particulates.
- Prefilters. Optional filters designed to extend the life of the OV filter. Requires filter holder kit as shown.
-
NK98886
- Tinted Full Face Lens Cover
- Protects the full face mask AND protects eyes from sunlight or other standard bright lights.
- (NOT for use for welding or other applications that require reduction of UV or IR radiation beyond the capability of normal sunglasses)
- Use with 3M 6000 Series Full Facepiece Respirators
- Pack of 25
- Genuine 3M product
NK98886- Tinted Full Face Lens Cover
- Protects the full face mask AND protects eyes from sunlight or other standard bright lights.
- (NOT for use for welding or other applications that require reduction of UV or IR radiation beyond the capability of normal sunglasses)
- Use with 3M 6000 Series Full Facepiece Respirators
- Pack of 25
- Genuine 3M product
-
Easy Tear-away protection for RPB Spray Hood Respirator lenses.
Available options as follows:
- Single Tear-away lenses. These are the most economical versions for standard industrial coatings applications. These options comes in the following configurations:
- Full length for all T-Links and for T200's with full-length capes.
- Shorter version designed for the legacy T100 model, but which will work on all RPB spray hoods that do not have the optional in-helmet light.
- Cassette Lens system. These are premium versions, designed for maximum clarity and convenience. On time-critical spray projects, cassette lenses save valuable time by eliminating the need to stop and change lenses. These come 7 lenses per set, with 10 sets per pack as follows:
- Full length for all T-Links and for T200's with full-length capes.
- Shorter version for T200's with face seal or any version not using the optional in-helmet light.
NOTE - the shorter versions will not cover the bottom of the lens area on the T200/T-Link full hoods, and should not be used when the optional light is used on the T-Link.
- Single Tear-away lenses. These are the most economical versions for standard industrial coatings applications. These options comes in the following configurations:
-
HLNV09913
- Suits Nova 2000 and Nova 3 Nova Talk Communication systems
- Push-to-Talk large button to enable easy communication
- Mounted on belt clip with 360 degree swivel button
- Connects between the Nova Talk cable and Radio Cable
- Sold Individually
- Genuine Parts - Manufactured by RPB Safety
HLNV09913- Suits Nova 2000 and Nova 3 Nova Talk Communication systems
- Push-to-Talk large button to enable easy communication
- Mounted on belt clip with 360 degree swivel button
- Connects between the Nova Talk cable and Radio Cable
- Sold Individually
- Genuine Parts - Manufactured by RPB Safety
-
HAT17110
- Bump Cap Assembly (17-110)
Genuine Product - Manufactured by RPB
HAT17110- Bump Cap Assembly (17-110)
Genuine Product - Manufactured by RPB
-
- Headtop only
- Multi Purpose full face respirator for grinding, welding and painting and more!
- Flip-up visor for easy communication with co-workers
- Very comfortable design with various options available as follows:
- Zytec FR Chin Seal
- Zytec FR Face Seal
- Zytec FR Shoulder Cape
- Tychem 2000 Face Seal
- Tychem 4000 Shoulder Cape
- Radiant Heat Respirator
- Includes aluminized shoulder cape, aluminized top cover, rear cover, and breathing tube covers
-
- Compatible with Nova 3, Nova 2000 and most supplied-air blast helmets, painting hoods and vests
- Rugged, compact design with serviceable components
- Includes belt and buckle
- C40 air flow device will cool the incoming air by as much as 52°F (29°C) and heat by 30°F (17°C)
- Cool Air Tube - will cool air by about 32° / (17°C)
- Heat Tube - will heat air by about 30°F (17°C)
- Flow Control Valve - no cooling, just ambient air with a volume control
- Constant Flow Valve - no cooling, just ambient air at full flow
- Sold Individually
- Genuine Products - Manufactured by RPB Safety
-
Enhance your respirator experience with Bullard Climate Control Tubes, SKU: P-ACBLD. These innovative devices offer a range of options to adjust the temperature of incoming air, ensuring maximum comfort during prolonged use.
- F30 Constant Flow for ambient air.
- AC1000 Cool Tube, cools air by up to 30°.
- AC2400 Heat/Cool Tube, adjusts air temperature by up to 30°.
- DC50 series DualCool®, cools both vest and respirator.
- Frigitron® with Free Air pump, cools air by up to 20°.
