Sandblasting Hoses & Ducting
Showing 16–30 of 30 results
-
Ensure safety with the Safety Whipcheck for Hose Connections (SKU: P-HFSCA). Designed for hoses from ½" to 3½", these steel-constructed whipchecks restrain hoses during unexpected disconnections.
- Use of a safety whipcheck restraint is mandatory on all hoses
- Whip checks are of steel construction
- HF SCA-1 cable suits hoses ½" to 2 ½"
- For use on Blast hoses (15 mm to 60 mm) OD
- HF SCA-2 cable suits hoses 2" to 3½"
- For use on blast and bull air hoses (45 mm to 90 mm) OD
- Whip Checks restrains hoses in the event of a failure or accidental disconnection
-
BAHNGKit
The “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gauge, needles, and a protective leather-bound case.
- For testing air pressure at the nozzle
- Uses hyperdermic needles which insert into the blast hose to take the nozzle pressure
- Insert about 6-10ft behind blaster for most accurate reading
- Test kit includes:
- Liquid filled stainless steel pressure gage with dual pressure & efficiency scale
- Four needles and instructions
- Protective leather bound case
- Sold as a Kit
- MPN 2010-014-03
Note - there is no calibration certificate process available for this item.
BAHNGKitThe “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gauge, needles, and a protective leather-bound case.
- For testing air pressure at the nozzle
- Uses hyperdermic needles which insert into the blast hose to take the nozzle pressure
- Insert about 6-10ft behind blaster for most accurate reading
- Test kit includes:
- Liquid filled stainless steel pressure gage with dual pressure & efficiency scale
- Four needles and instructions
- Protective leather bound case
- Sold as a Kit
- MPN 2010-014-03
Note - there is no calibration certificate process available for this item.
-
Nozzle holder for blast hose
- Couples the blast nozzle to the blast hose
- Choose your blast nozzle thread type;
- 3/4" Medium (aka Mitey-Mite) Thread
- 1-1/4" Industrial Fine Thread
- 2" Coarse/Contractor Thread *Contractor Favorite*
- Available in Nylon, Brass or Aluminum
- Click the Documents tab below to view full selection
- Industry Commonly Referred to As: HE1, HE-1, HE2, HE-2, HE3, HE-3, NHP1, NHP2, NHP3, NH1, NH-1, NH2, NH-2, NH3, NH-3
-
- 2-claw threaded coupling for metering valve outlet, to enable connection of blast hose
- Supplied with HFGMRLP coupling gasket fitted
- For Aluminum, Brass, and Steel, use HFCLP1 thin safety lock pins - purchase separately
- Nylon is supplied with HFGPCG gasket fitted and contains an integral springlock pin
- 2 types available - Standard and MegaMax.
- Note: MegaMax and Standard couplings require an adapter to fit together.
- MegaMax couplings are Full-Flow, designed to remove the air restrictions caused by standard couplings, and increases the PSI available to the nozzle. The increased PSI is mostly beneficial when doing high-production blasting using 1.5" or 2" ID Blast Hoses.
- These are threaded couplings designed for metering valve outlets only. Unthreaded QC couplings are used on blast hoses, and can be found HERE.
- Note: 1 1/4" threaded couplings can also be used as Quick-couple type nozzle holders for fine thread nozzles.
- Industry Size Commonly Referred to as SB1, SB-1, SB2, SB-2
-
- Suits MegaFlow Bull Air Hose 1-1/2" and 2" (BHBULL38/50)
- 4-Claw Crowsfoot Bull Hose Coupling
- Supplied with FMCFG gasket fitted
- Always use HFCLP2 lock pins - order separately
- Rated for 150 psi
- Sold Individually
-
- Suits MegaFlow Bull Air Hose (BHBULL50/75)
- Ground Joint Spud Bull Hose Coupling
- Rugged plated steel construction
- Recommended by BlastOne as the preferred Bull hose fitting – safer than 4-claw
- Gasket-less, low maintenance design
- Sold Individually
- Genuine Parts – manufactured by Dixon
-
- Suits MegaFlow Bull Air Hose (BHBULL50/75)
- Ground Joint Spud Hose Fittings made of Plated Iron - Connects Air hose to Equipment
- Recommended by BlastOne as the preferred Bull hose fitting - safer than 4-claw
- Sold Individually
- Genuine Parts - Manufactured by Dixon
-
- 30 Day Money Back Guarantee | Free Returns
- Industry standard coupling for use with air supply hose
- Rugged steel construction
- Quarter-turn quick action connector
- Supplied with 3/4" I.D. bore gaskets fitted
- Use HF CLP-1 or HF CLP-2 Lock Pin - (not included)
- Available with hose tail, male threads, or female threads
- Sold individually
-
General purpose air connection fittings
- This is the Reducing Bushing group
- Many sizes available
- Many materials available, including Stainless Steel, Brass, Galvanized Malleable Iron, and Iron
- 150 psi rated
Contact us for info on sizes and materials not listed.
-
AVAILABLE FOR RENTAL OR PURCHASE
- Comes in 25 foot lengths
- Built with Heavy Duty Nylon with Extra Wear Strips
- Tough coated membrane wrapping
- Spiral reinforcing ribs for suction applications to ensure the Ducting doesn't collapse
- Collapses down for compact transportation and storage
- Can be used under negative or positive pressure
- Rated for temperatures from -20 to 180 degrees F
- Meets NFPA701 Method 2 Specs for Flame Resistance
-
CopperVac is the heavy-duty vacuum hose for highly abrasive media recovery. Featuring a polyurethane liner, rigid PVC spiral reinforcement, and copper wire for static dissipation, it's perfect for sand and gravel vacuuming as well as any abrasive blasting media. Available in a range of sizes, experience the power of CopperVac now!
- Heavy duty, extra thick abrasion-resistant liner
- Rigid PVC spiral (counter-clockwise helix)
- Flexible, even in cold temperatures
- Copper wire, for static dissipation
-
Customized sheet metal square-to-round adapters, allows easy connection of ducting to ventilation fans, including Black Max fans. NOTE - It is not recommended to put ducting or dust socks on 20" or 24" Black Max electric fans. Pneumatic is OK in all sizes.
- High-quality materials for durability and longevity
- Perfect fit with ducts and fans
- Easy to install
- Suitable for commercial and industrial applications
-
- Suits AHR general purpose air hose
- Two piece fitting, hose tail to swivel nut female thread
- Various clamping options - double bolt clamp or bandit clamp
- Sold individually
-
DCDC20S
- Suits 20" Flexible Dust Collector Ducting
- Duct Clamp is used to quickly join Ducts to the Dust Collector or a duct joining ring
- Simple worm/screw type
- Sold Individually
DCDC20S- Suits 20" Flexible Dust Collector Ducting
- Duct Clamp is used to quickly join Ducts to the Dust Collector or a duct joining ring
- Simple worm/screw type
- Sold Individually
SANDBLASTING & SHOT BLAST HOSE
Cheap blast hoses which seem a good bargain at the time are available, but when the ‘true quality’ begins to show, the reality is you have paid too much for an inferior product! If cheaper blast hose has been made from recycled rubber, the probable life of the hose could be as meager as 150 200 hours. With a high quality blast hose, the expectant life is 400-500 hours (depending on the abrasive used). You would be better off paying for a good quality, well constructed blast hose.
It’s not only the quality, cost and how long it lasts – will it protect you adequately from electric shock? The safety factor should come into the equation when making this important purchase. BlastOne SupaLife blast hose is manufactured using virgin natural rubber with carbon black graphite. This has anti-static qualities to eliminate the problem by dissipating the static electricity through the wall of the blast hose. BlastOne’s high quality SupaLife blast hose is constructed using a 2-ply or 4-ply arrangement – highly woven cord linings which are placed in a cross ply pattern to add strength, but still allow the blast hose the flexibility that it requires. BlastOne are the premium long lasting sandblast hose suppliers.
BULL HOSE
Contact BlastOne for Quality Bull Hose for unrestricted air supply for your sand blasting system
FLEXIBLE DUCTING FOR PORTABLE VENTILATION FANS
Contact BlastOne for all your ventilation ducting requirements for mobile dust collectors & portable ventilation fans
AIR HOSE
BlastOne SupaLife blast hose is manufactured using virgin natural rubber with carbon black graphite. This has anti-static qualities to eliminate the problem by dissipating the static electricity through the wall of the blast hose. BlastOne’s high quality SupaLife sandblast hose is constructed using a 2-ply or 4-ply arrangement – highly woven cord lining which are placed in a cross ply pattern to add strength, but still allow the blast hose the flexibility that it requires.
BlastOne carries in-stock a wide selection of blast hoses, nozzles and couplings. All our blast hoses offer the greatest resistance therefore equipped for the toughest jobs and applications.