Instruments
Showing 1–15 of 125 results
-
Detects holidays, porosity, pinholes, leaks and other discontinuities in coatings, linings, etc.
- Advanced pulse or continuous DC technology
- Lightweight and ergonomic design
- Auto voltage calculator based on coating thickness
- Multiple electrode options with custom availability
- Long Form Certificate of Calibration included
Available in 3 Kit options as follows:
- PosiTest HHD Kit
- Pulsed DC Output
- 72 Wh Li-ion battery pack with built-in charge indicator
- Durable Pelican Storm Case
- 20" Electrode Rod
- Shoulder Strap
- 25' earthing cable and smart charger with universal AC voltage input
- PosiTest HHD Basic Kit
- Pulsed DC Output
- 36 Wh Li-ion battery pack with built-in charge state indicator
- Hard Shell Case
- 5" Electrode Rod
- 25' earthing cable and smart charger with universal AC voltage input
- Stainless Steel Fan Brush
- PosiTest HHD C Kit
- Continous DC Output
- 18650 Li-ion Batteries (4)
- Hard Shell Case
- Extension rod is not required, but available
-
INDHHDCEXTROD
- 17" Rod
- For use with PosiTest HHD C
- Genuine DeFelsko product
INDHHDCEXTROD- 17" Rod
- For use with PosiTest HHD C
- Genuine DeFelsko product
-
INDLPDEXT
Extend your PosiTest® LPD base an additional 1 foot with the extension rod.
- Includes 1 rod
NOTE: Multiple extension rods can be connected together to extend reach further
INDLPDEXTExtend your PosiTest® LPD base an additional 1 foot with the extension rod.
- Includes 1 rod
NOTE: Multiple extension rods can be connected together to extend reach further
-
INDHHDCVERIFY
- Use to verify continuous DC holiday detectors
- Measurement range of 0.5 to 30 kV
- Portable and Lightweight
- No external power source required
- Device comes complete with the following:
- 6" Ground Wire
- 3 AAA Batteries
- Instructions
- Long Form Certificate of Calibration traceable to NIST
- 2 year warranty
INDHHDCVERIFY- Use to verify continuous DC holiday detectors
- Measurement range of 0.5 to 30 kV
- Portable and Lightweight
- No external power source required
- Device comes complete with the following:
- 6" Ground Wire
- 3 AAA Batteries
- Instructions
- Long Form Certificate of Calibration traceable to NIST
- 2 year warranty
-
INDDTROLLER
Optional spring-loaded Dust Tape Roller, used to apply recommended constant force.
INDDTROLLEROptional spring-loaded Dust Tape Roller, used to apply recommended constant force.
-
INDLPDACC
This pack includes adaptable sponge hardware and accessories to convert the Basic Kit to the Complete Kit. It includes the following:
- Adaptable Sponge Hardware
- Roller
- Internal Diameter
- 8" x 8" (20 cm x 20 cm) Sheet Sponge for custom usages
- Wetting Agent
- Extension Accessories
- Extension rods provide an additional 2' (0.6 m) of reach
- Universal adapters to extend existing paint rollers and poles
- 40' (12 m) Ground Wire
- Magnetic Grounding Post
- Hard Shell Carrying Case
INDLPDACCThis pack includes adaptable sponge hardware and accessories to convert the Basic Kit to the Complete Kit. It includes the following:
- Adaptable Sponge Hardware
- Roller
- Internal Diameter
- 8" x 8" (20 cm x 20 cm) Sheet Sponge for custom usages
- Wetting Agent
- Extension Accessories
- Extension rods provide an additional 2' (0.6 m) of reach
- Universal adapters to extend existing paint rollers and poles
- 40' (12 m) Ground Wire
- Magnetic Grounding Post
- Hard Shell Carrying Case
- Adaptable Sponge Hardware
-
INDLPDCBLDWAND
Converts the PosiTest® LPD Low Voltage Pinhole Detector into a cabled wand style unit. Includes the following:
- Remote Wand Handle
- Compatible with Rectangular and Roller Sponge Hardware
- Compact size - only 5.3 inches (13.5 cm)
- Includes handle and 5 foot (1.5 m) hot-wire cable, making it easier to reach difficult-access areas
INDLPDCBLDWANDConverts the PosiTest® LPD Low Voltage Pinhole Detector into a cabled wand style unit. Includes the following:
- Remote Wand Handle
- Compatible with Rectangular and Roller Sponge Hardware
- Compact size - only 5.3 inches (13.5 cm)
- Includes handle and 5 foot (1.5 m) hot-wire cable, making it easier to reach difficult-access areas
- Remote Wand Handle
-
INDLPDVERIFY
Use to verify electrical resistance with the PosiTest® LPD.
- Includes decage box, cable, and calibration verification procedure.
NOTE: To verify voltage, a calibrated multimeter (NOT included) is required.
INDLPDVERIFYUse to verify electrical resistance with the PosiTest® LPD.
- Includes decage box, cable, and calibration verification procedure.
NOTE: To verify voltage, a calibrated multimeter (NOT included) is required.
-
INDHHDCBATTERY
- Replacement Li-ion batteries
- Use for PosiTest HHD C
- Pack of 4
INDHHDCBATTERY- Replacement Li-ion batteries
- Use for PosiTest HHD C
- Pack of 4
-
INDDTREPORT
Use with the PosiTest® DT. Includes the following:
- Dust Test Comparator (1)
- Transparent Display Board (1)
- Report Forms - Pack of 25 (4)
INDDTREPORTUse with the PosiTest® DT. Includes the following:
- Dust Test Comparator (1)
- Transparent Display Board (1)
- Report Forms - Pack of 25 (4)
-
INDLPDWET
When pinholes are too small that the water cannot reach the conductive substrate underneath, the use of a wetting agent can help lower surface tension, allowing the solution to better penetrate the pinhole.
- Includes two 60mL bottles
INDLPDWETWhen pinholes are too small that the water cannot reach the conductive substrate underneath, the use of a wetting agent can help lower surface tension, allowing the solution to better penetrate the pinhole.
- Includes two 60mL bottles
-
Pinhole detectors detect holidays, pinholes, and other discontinuities on metal and concrete substrates.
The LPD Low Voltage series is designed for coating thickness up to 20 mils. Some of the features include:
- GroundSense™, to visually confirm instrument is properly grounded
- 4 voltage operation ranges
- Weatherproof, dustproof, and shockproof
- Long Form Certificate of Calibration included
2 stick kit versions available as follows:
- PosiTest LPD Basic Kit
- Base Tube
- 3 AAA Batteries
- Rectangle Sponge Hardware
- Rectangle Sponge
- 15' (4.5 m) Ground Wire
- Insulating Collar
- Ear Bud
- Wrist Strap
- Carabiner
- Hard Shell Case
- PosiTest LPD Complete Kit
- Includes all contents of Basic Kit, plus:
- Adaptable Sponge Hardware
- Rectangle (Flat)
- Roller
- Internal Diameter
- Additional 8" x 8" (20 cm x 20 cm) Sheet Sponge for custom usages
- Wetting Agent
- Extension Accessories
- Extension rods provide an additonal 2' (0.6 m) of reach
- Universal adapters to extend existing paint rollers and poles
- 40' (12 m) Ground Wire
- 15' (4.5 m) Hot Wire
- Magnetic Grounding Post
- Adaptable Sponge Hardware
- Includes all contents of Basic Kit, plus:
Note: We also carry Defelsko HHD High voltage kits for work on thicker coatings from 8 mils and up.
-
The PosiTest Cross Hatch Adhesion Test Kit detects coating's ability to resist separation from a substrate when lattice pattern is cut into the coating. The specific kit you need will depend on the thickness of the coating and which standard you are testing to.
- Includes all tools and accessories needed for cross hatch testing
- Comfortable use with ergonomic tool handle and non-slip grip
- Replaceable, 4-sided steel blade
- Ideal for coatings up to 10 mils
- See long description tab for for kit and standard details
ISO 2409 Kits
- 1 mm / 6 Teeth
- 2 mm / 6 Teeth
- 3 mm / 6 Teeth
ASTM D3359 Kits
- 1 mm / 11 Teeth
- 2 mm / 6 Teeth
Each kit includes the following:
- Cross Hatch Tool
- 4-in1 Blade
- Magnifier - 3X (ISO) or 10X (ASTM)
- ISO or ASTM Tape
- Brush
- Scissors
- 3/32" Hex Key
- ISO/ASTM Classification Reference Chart
- Instruction Manual
- Durable Hard Shell Case
- Additional tape and blades are available under the repair parts tab
-
BlastOne carries all DeFelsko inspection tools and supplies. This group shows the following 4-in-1 Replacement Blades for the PosiTest CH Tester:
- Replacement Blade, 1 mm / 6 Teeth, for ISO 2409 Cross Hatch Test
- Replacement Blade, 2 mm / 6 Teeth, for ISO 2409 and ASTM D3359 Cross Hatch Test
- Replacement Blade, 3 mm / 6 Teeth, for ISO 2409 Cross Hatch Test
- Replacement Blade, 1 mm / 11 Teeth, for ASTM D3359 Cross Hatch Test
-
Replacement Tape for Defelsko PosiTest Cross Hatch Adhesion Testers available as follows:
- Tape for ISO 2409 Kit
- 1 inch x 72 yards / roll
- Tape for ASTM D3359 Kit
- 1 inch x 90 yards / roll
Sold by the roll
- Tape for ISO 2409 Kit