All Products
Showing 196–210 of 1339 results
-
Junction Box assemblies include the deadman controls for Bulk pots, and are required when retrofitting an old pot with new valves. Available in 2 and 4 outlet configurations.
-
INDHHDCEXTROD
- 17" Rod
- For use with PosiTest HHD C
- Genuine DeFelsko product
INDHHDCEXTROD- 17" Rod
- For use with PosiTest HHD C
- Genuine DeFelsko product
-
INDLPDEXT
BlastOne offers all parts and accessories for DeFelsko testing instruments.
This extension rod accessory extends the reach of the PosiTest® Low Voltage Pinhole Detector by 12" (305mm). Multiple extensions can be connected together to further extend the reach.
MPN: LPDEXTROD
INDLPDEXTBlastOne offers all parts and accessories for DeFelsko testing instruments.
This extension rod accessory extends the reach of the PosiTest® Low Voltage Pinhole Detector by 12" (305mm). Multiple extensions can be connected together to further extend the reach.
MPN: LPDEXTROD
-
Upgrade old technology Bulk pots from donut valves & pinch valves to state-of-the-art TeraValve systems using a retrofit kit. Available in 2 or 4 outlet configurations.
The CEN Mega Exhaust Muffler retrofit kit is a common option that can be conveniently added when performing this retrofit.
Note: matching Junction Box is available separately. Retrofitting is recommended only for mega blasters with good structural integrity.
These are the parts kits only. BlastOne can perform the retrofit if desired - contact us for pricing and details.
-
INDDTROLLER
Optional spring-loaded Dust Tape Roller, used to apply recommended constant force.
INDDTROLLEROptional spring-loaded Dust Tape Roller, used to apply recommended constant force.
-
INDLPDCBLDWAND
BlastOne carries all DeFelsko instruments, supplies, & accessories.
This accessory converts the PosiTest LPD low-voltage pinhole detector into a cabled wand style unit and is compatible with the rectangular and roller sponge hardware (not included).
The unit comes complete with the remote wand handle and a 5' (1.5m) hot-wire cable.
INDLPDCBLDWANDBlastOne carries all DeFelsko instruments, supplies, & accessories.
This accessory converts the PosiTest LPD low-voltage pinhole detector into a cabled wand style unit and is compatible with the rectangular and roller sponge hardware (not included).
The unit comes complete with the remote wand handle and a 5' (1.5m) hot-wire cable.
-
INDLPDVERIFY
BlastOne stocks all accessories and supplies for DeFelsko testing instruments.
This PosiTest LPD verifier is designed to check the accuracy of the low-voltage pinhole detector.
In addition to checking accuracy, the Verifier can be used to calibrate the LPD if used in conjunction with a digital multimeter (not included).
Each PosiTest LPD Verifier comes complete with a Decade Box, connection cable, and instructions.
MPN: LPDVERIFY
INDLPDVERIFYBlastOne stocks all accessories and supplies for DeFelsko testing instruments.
This PosiTest LPD verifier is designed to check the accuracy of the low-voltage pinhole detector.
In addition to checking accuracy, the Verifier can be used to calibrate the LPD if used in conjunction with a digital multimeter (not included).
Each PosiTest LPD Verifier comes complete with a Decade Box, connection cable, and instructions.
MPN: LPDVERIFY
-
INDDTREPORT
Use with the PosiTest® DT. Includes the following:
- Dust Test Comparator (1)
- Transparent Display Board (1)
- Report Forms - Pack of 25 (4)
INDDTREPORTUse with the PosiTest® DT. Includes the following:
- Dust Test Comparator (1)
- Transparent Display Board (1)
- Report Forms - Pack of 25 (4)
-
INDLPDWET
BlastOne carries all DeFelsko instruments, supplies, and accessories.
This product is designed for use with the PosiTest LPD. It aids detection of very small pinholes by lowering the surface tension of the water.
- Includes two 60mL bottles
INDLPDWETBlastOne carries all DeFelsko instruments, supplies, and accessories.
This product is designed for use with the PosiTest LPD. It aids detection of very small pinholes by lowering the surface tension of the water.
- Includes two 60mL bottles
-
BlastOne offers all DeFelsko testing equipment, accessories, and supplies.
Pinhole detectors (aka Spark Testers) such as this PosiTest® LPD, detect holidays, pinholes, and other discontinuities on metal and concrete substrates.
The DeFelsko LPD Low Voltage series is designed for coating thickness up to 20 mils. Some of the features include:
- GroundSense™, to visually confirm instrument is properly grounded
- 4 voltage operation ranges
- Weatherproof, dustproof, and shockproof
- Long Form Certificate of Calibration included
2 stick kit versions available as follows:
- PosiTest LPD Basic Kit
- Base Tube
- 3 AAA Batteries
- Rectangle Sponge Hardware
- Rectangle Sponge
- 15' (4.5 m) Ground Wire
- Insulating Collar
- Ear Bud
- Wrist Strap
- Carabiner
- Hard Shell Case
- PosiTest LPD Complete Kit
- Includes all contents of Basic Kit, plus:
- Adaptable Sponge Hardware
- Rectangle (Flat)
- Roller
- Internal Diameter
- Additional 8" x 8" (20 cm x 20 cm) Sheet Sponge for custom usages
- Wetting Agent
- Extension Accessories
- Extension rods provide an additonal 2' (0.6 m) of reach
- Universal adapters to extend existing paint rollers and poles
- 40' (12 m) Ground Wire
- 15' (4.5 m) Hot Wire
- Magnetic Grounding Post
- Adaptable Sponge Hardware
- Includes all contents of Basic Kit, plus:
Note: We also carry Defelsko HHD High voltage holiday detectors for work on thicker coatings from 8 mils and up.
-
These 4-in-1 replacement blades are essential for precise cross hatch testing, ensuring compliance with ISO 2409 and ASTM D3359 standards. Each blade is crafted for durability and precise cuts, making them indispensable for professionals requiring accurate adhesion testing results.
- Available in configurations for both ISO 2409 and ASTM D3359 standards
- 1 mm / 6 teeth blade for ISO 2409 specific tests
- 2 mm / 6 teeth blade suitable for both ISO 2409 and ASTM D3359 tests
- 3 mm / 6 teeth blade designed for ISO 2409 tests
- 1 mm / 11 teeth blade exclusively for ASTM D3359 tests
- Ensures accurate and compliant cross hatch testing
-
Replacement Tape specially designed for both the PosiTest® CH ASTM Kit and the PosiTest® CH ISO Kit, this high-quality replacement tape ensures precise adhesion evaluation in line with ASTM D3359 and ISO 2409 standards.
- Specifically designed for the PosiTest® CH Cross Hatch Adhesion Test
- Optimized for both ASTM D3359 and ISO 2409 testing standards
- 1 inch x 72 yards roll for the ISO 2409 Kit
- 1 inch x 90 yards roll for the ASTM D3359 Kit
- Essential for maintaining accuracy in adhesion testing
-
When your RPB coating respirators need refreshed, we have the parts you need. This group includes the replacement Tyvek® capes/hoods.
- For both T-Link and T200 versions:
- Tychem® 2000 Full-Length Hood, MPN 17-712
- Tychem® 4000 Full-Length Hood w/sealed seams, MPN 17-713
- Tychem® 4000 Extra-Long Hood w/sealed seams, double-bib, and waist straps. MPN 17-713-SX
- For T200 version only:
- Tychem® 2000 Face Seal, MPN 17-722
- Tychem® 2000 Face Seal w/Shoulder-Length hood, MPN 17-732
- For legacy T100 version only:
- Tychem® 4000 Full-Length Hood w/ sealed seams, MPN 07-150
- Tychem® 2000 is rated for light liquid splash applications and protects against over 40 chemicals. This version is most commonly used in industrial painting applications.
- Tychem® 4000 is also rated for light liquid splash applications and protects against over 100 chemicals. RPB constructs their 4000 hoods with sealed seams for even greater protection.
- For both T-Link and T200 versions: