All Products
Showing 106–120 of 1329 results
-
The innovative and capable PosiTector Gage / Body is the backbone of a large and growing family of DeFelsko inspection equipment. When paired with 1 of the over 10 interchangeable probes, it can measure and store data for common environmental, surface, coating and more conditions. DeFelsko offers two versions of gauges (Standard and Advanced) which can be purchased individually, or in a variety of DeFelsko Body / Probe packages including 1 or more probes, depending on the application. A comparison list of the feature differences of the Standard and Advanced bodies follows:
- Economical Standard Body:
- Storage of up to 1000 readings per probe (newly up from 250), available for viewing or downloading.
- Connectible Advanced Body:
- Storage of up to 250,000 readings from mulitple probes (newly up from 100,000) in up to 1000 batches
- Touchscreen keyboard makes renaming batches, adding notes, etc., more convenient than ever
- Scan mode, can take continuous readings without lifting the probe and provides 3 ways to treat the data
- WiFi and Bluetooth 4.0 technology for data transfer to mobile devices, printers, and even 3rd party software
- Pre-programmed to help compliance with SSPC-PA 2, ISO 19840 and other standards
- New Display: Now with a 15% larger screen (2.8" across)
- Upgraded Construction: New weatherproof, dustproof & water-resistant IP65 rated enclosure w/shock absorbing holster
- Advanced Electronics: Now the same batteries last up to 30% longer
- On-Gage Support: Functions now have a Help button to explain the feature and operation. Much easier than a manual!
- Economical Standard Body:
-
GR120700Pipe fitters and maintenance workers routinely use these fittings in many applications. Details as follows:
- 1-¼" - 11 ½ NPTF thread size
- Carbon Steel, Hex Nipple Design - makes installation easier
- 3000 PSI Operating Pressure with 4:1 Safety factor
GR120700Pipe fitters and maintenance workers routinely use these fittings in many applications. Details as follows:- 1-¼" - 11 ½ NPTF thread size
- Carbon Steel, Hex Nipple Design - makes installation easier
- 3000 PSI Operating Pressure with 4:1 Safety factor
-
IPC3001The deflection tip in the ConeBlast Jr. internal pipe blaster is responsible for ensuring an even blast pattern. The abrasive stream hits the tip and fans out in a 360° pattern. It is subject to high wear and is a common replacement part. Additional details:
- Application: This tip works only in the ConeBlast Jr., not the larger ConeBlast version.
- Construction: This tip is made from tungsten carbide. For large pipe-cleaning projects, contact us for options on longer-life versions.
IPC3001The deflection tip in the ConeBlast Jr. internal pipe blaster is responsible for ensuring an even blast pattern. The abrasive stream hits the tip and fans out in a 360° pattern. It is subject to high wear and is a common replacement part. Additional details:- Application: This tip works only in the ConeBlast Jr., not the larger ConeBlast version.
- Construction: This tip is made from tungsten carbide. For large pipe-cleaning projects, contact us for options on longer-life versions.
-
DM2152ACSThis kit includes all parts needed to change from blasting to blow-off at the flip of a switch at the deadman. Eliminates need for a separate air-hose or trekking back to the pot to shut off the abrasive. This version is for pots with an existing Thompson 2 valve and pneumatic controls.DM2152ACSThis kit includes all parts needed to change from blasting to blow-off at the flip of a switch at the deadman. Eliminates need for a separate air-hose or trekking back to the pot to shut off the abrasive. This version is for pots with an existing Thompson 2 valve and pneumatic controls.
-
The SnakeBite XP is the high-performance nozzle used in the highly successful SnakeBite XQ silenced configuration. As the XP uses a simple bump cap on the end (instead of the silencer), it does not have the noise and thrust reduction of the XQ. It is very fast and exceeds the performance of our hyper nozzle. Details as follows:
- Performance:
- The advanced modeling used when designing this Snakebite XP hyper nozzle has taken blasting performance to a whole new level. The refined internal geometry coupled with the non-silencing bump-cap produces very fast cleaning speed indeed.
- Liner:
- The new internal geometry when combined with the silicon nitride composition extends usable life greatly.
- Jacket:
- Anodized aluminum with ergonomic shape makes for a very comfortable grip.
- Sizes:
- Available in the following orifice sizes: 6, 7, 8, & 10
- Overall length varies from 10" to 13", depending on orifice size.
- Thread type:
- Available in standard 2" Contractor thread only. (See You May Also Like nozzle thread adapters below if you want to use with fine thread nozzle holders.)
- Performance:
-
BlastOne has the parts needed to service and maintain all Axxiom / Schmidt blast pots. The following are the common Pop Up components - contact us if you do not see the version you need. Pop-up Valve and Shaft (aka Pop-up Head)
- Hemispherical pop-up valve seals off pot when pressurized
- Shaft is embedded in the urethane head
- Suits Schmidt's contractor series blast pots
- Available in the following:
- MPN 2100-000, Small, for 1.5 CF pots
- MPN 2100-010, Standard, for 3.5, 6.5, 10, & 20CF pots
- MPN 2100-010-04, Alternate for Standard sizes, designed for high flow
- Available in the following:
- MPN 2100-001, Small, for 1.5 CF pots
- MPN 2100-011, Standard, for 3.5, 6.5, 10 & 20 CF pots
- MPN 2100-011-04, “Sure-Seal” Alternate for standard sizes, good when applications include blasting at low pressures. Use with 2100-010-04 pop-up head.
-
BlastOne BlasterAll Blasting Gloves feature:
- Leather exterior for good abrasion resistance
- ANSI Cut Level 4 Kevlar lining and 7 inch gauntlet provides extra protection for hand and forearm
- Stylish & Comfortable design
- Touch-screen finger tips allows answering mobile devices without removing the gloves
- Extended size selection from X-Small to 2X-Large
- Coordinates with BlastOne BlasterAll Coveralls available here
-
The latest member of our BlasterAll® family of products is our new Rigger gloves. It's styled like the original BlasterAll® blasting gloves, but without the extended gauntlet for more convenient every day use. Features include:
- Leather exterior for good abrasion resistance
- Extended cut resistance with Cut Level 5 Kevlar® lining
- Stylish & Comfortable design
- Touch-screen finger tip on index finger
- Extended size selection from X-Small to 2XL-Large
-
One size fits all general purpose leather work glove.
- Generous length gauntlet for lower arm protection
- Abrasive resistant threads provides longer life than normal ‘welding gloves’
- Tough, suede finish provides additional gripping power
- Available by the pair with discounts in dozen and case (5 dozen) quantities.
- Also see BlastOne's new BlasterAll Premium Leather Blasting Gloves
-
NA230RPB
- Tough, rough - grain finish
- Abrasive resistant Kevlar threads provides longer life than normal 'welding gloves'
- Generous length gauntlet for lower arm protection and soft cotton inner lining for comfort
- Also see BlastOne's new BlasterAll Premium Leather Blasting Gloves
NA230RPB- Tough, rough - grain finish
- Abrasive resistant Kevlar threads provides longer life than normal 'welding gloves'
- Generous length gauntlet for lower arm protection and soft cotton inner lining for comfort
- Also see BlastOne's new BlasterAll Premium Leather Blasting Gloves
-
Experience safety and comfort with the Bullard Heavy Duty unlined leather Blast Gloves. Crafted using resilient Kevlar thread, these gloves are a fortress for your hands.
- Extra-long 8-inch cuff: Maximum forearm protection
- Kevlar thread construction: Exceptional strength and durability
- Reinforced cowhide palm: Enhanced grip and resilience
- Pre-curved fingers: Optimal hand mobility
- Available in sizes Medium - XX-Large
- Sold by the pair or in a pack of 6
-
Step up your hand protection with our Goat Skin Leather Driver Gloves, SKU: P-NA206. Combining value and durability, these unlined gloves offer sleek comfort and superior flexibility for everyday wear.
- Available in sizes S to XXL.
- Sold by the pair.
- Quantity and bulk discounts available.
-
SBPL05WElevate your paint booth's efficiency and safety with the Liftman Pneumatic Paint Booth Personnel Manlift, Twin Wheel Version, SKU: SBPL05W. This pneumatic lift is ideal for explosion-sensitive areas, reaching a working height of up to 14' 9".
- Twin Wheel Version for stable and smooth operation.
- Pneumatically operated, ensuring safety in explosive environments.
- Self-centering steering for effortless maneuverability.
- CE, CAS, UL certified and ATEX compliant.
SBPL05WElevate your paint booth's efficiency and safety with the Liftman Pneumatic Paint Booth Personnel Manlift, Twin Wheel Version, SKU: SBPL05W. This pneumatic lift is ideal for explosion-sensitive areas, reaching a working height of up to 14' 9".- Twin Wheel Version for stable and smooth operation.
- Pneumatically operated, ensuring safety in explosive environments.
- Self-centering steering for effortless maneuverability.
- CE, CAS, UL certified and ATEX compliant.