Hand Tools
Showing 16–30 of 83 results
-
HT1595910
- Pneumatically operated scaling hammer with 11 working pistons
- Ideal for removing tough materials on ship decks before abrasive blasting
- Floating head design to glide across uneven surfaces
- Equipped with 11 Carbide-tipped heads
- Sold as a complete kit, ready to work
- Genuine Products - Manufactured by Trelawny
HT1595910- Pneumatically operated scaling hammer with 11 working pistons
- Ideal for removing tough materials on ship decks before abrasive blasting
- Floating head design to glide across uneven surfaces
- Equipped with 11 Carbide-tipped heads
- Sold as a complete kit, ready to work
- Genuine Products - Manufactured by Trelawny
-
HT1595930
- ATEX Certified - for use in potentially explosive or hazardous environments
- Sold individually
- Intrinsically safe variant of SF11 Deck Hammer (HT1595910)
- ATEX Gas Zone 1
- ATEX Dust Zone 21
HT1595930- ATEX Certified - for use in potentially explosive or hazardous environments
- Sold individually
- Intrinsically safe variant of SF11 Deck Hammer (HT1595910)
- ATEX Gas Zone 1
- ATEX Dust Zone 21
-
- Ideal for preparing flat or large vertical areas such as beams, girders and tanks.
- Scarifies the surface, using a large range of different heads
- 3M Flappers, Star Bits, TC Cutters and more all mount on a spinning head
- Use with Trelawny TVS Vacuum.
- Genuine Products - Manufactured by Trelawny
-
IPC1000
The RotoBlast is the fastest way to blast the internals of pipes. This IPC1000 version is designed for pipes from 10" to 35" ID. Fast and effective blasting is ensured by the twin-nozzle spinning blast head.
Additional details of this Internal Pipe Blaster are as follows:
- 360 degree blasting covers the entire ID of the pipe
- Speed is manually controlled. Optional electric winch is also available, helping to save labor and aid consistency in results.
- This IPC1000 pipe blasting tool works in pipes 10" to 35" ID
- Nozzles sold separately - details below:
- 2 nozzles are required for this unit.
- Use BNAT nozzles for pipes from 8" to 11" ID.
- Use BNASB nozzles for pipes from 12" to 36" ID.
- Centering carriage sold separately - details below:
- IPC1200 Centering Carriage is required and is adjustable to work in pipes from 8 to 36" in diameter.
- Note: ID blasting equipment requires significant maintenance. A Rotoblast Repair Parts Kit is available for convenience, or individual parts may be purchased under the Parts Tab. An operators manual is shown under the documents tab or you can contact us for further information.
IPC1000The RotoBlast is the fastest way to blast the internals of pipes. This IPC1000 version is designed for pipes from 10" to 35" ID. Fast and effective blasting is ensured by the twin-nozzle spinning blast head.
Additional details of this Internal Pipe Blaster are as follows:
- 360 degree blasting covers the entire ID of the pipe
- Speed is manually controlled. Optional electric winch is also available, helping to save labor and aid consistency in results.
- This IPC1000 pipe blasting tool works in pipes 10" to 35" ID
- Nozzles sold separately - details below:
- 2 nozzles are required for this unit.
- Use BNAT nozzles for pipes from 8" to 11" ID.
- Use BNASB nozzles for pipes from 12" to 36" ID.
- Centering carriage sold separately - details below:
- IPC1200 Centering Carriage is required and is adjustable to work in pipes from 8 to 36" in diameter.
- Note: ID blasting equipment requires significant maintenance. A Rotoblast Repair Parts Kit is available for convenience, or individual parts may be purchased under the Parts Tab. An operators manual is shown under the documents tab or you can contact us for further information.
-
Blast N' Vac Workhead Complete Kits are great for flat surfaces, but custom units are available. Freatures include the following:
- Standard / BNV-2.5
- Standard / BNV-3
- Large with wheels / BNV-4
- Standard / BNV-5
- Super Five™
- Largest workhead available
- Standard / BNV-6
- Right Angle
- Designed to get into smaller areas
The MiniBRS G2 Trigger Workheads are easier to handle than other versions for your vacuum blasting projects. Features include the following:
- Longer lasting brushes
- More containment while blasting
- Improved vacuum flow
- Easier to slide head over surfaces while blasting
- Various Brush options available, including:
- Flat Surface
- Inside Corner
- Outside Corner
- Available in either Electric or Pneumatic
-
- Electric vacuum available - wet & dry (HEPA)
- Best used with
-
- TFP200 Deck Scaler
- SF11 Deck Hammer
- Peening Prep Tool
- Trelawny range of Hand Scalers
- Pneumatic vacuum available – wet & dry (HEPA)
- Best used with
-
- Trelawny range of EX tools for use in explosive environments
- VL303 Needle Scaler
- SF1 Scaling Hammer
- SF11 Deck Hammer
- Trelawny range of EX tools for use in explosive environments
-
HTX01018
- The preferred choice for ferrous applications
- Flutes are ground in both directions - right and left hand - increasing operator control and efficient stock removal in harder materials
- Can be used for milling, acute angle milling and narrow contouring in brass, bronze, copper, cast iron, 45-60 Rc steels, carbon steel, nickel chrome steel, stainless steel, steel weldments and titanium
HTX01018- The preferred choice for ferrous applications
- Flutes are ground in both directions - right and left hand - increasing operator control and efficient stock removal in harder materials
- Can be used for milling, acute angle milling and narrow contouring in brass, bronze, copper, cast iron, 45-60 Rc steels, carbon steel, nickel chrome steel, stainless steel, steel weldments and titanium
-
HTWBPEN3029ST
- Suitable for light-duty brushing applications
- Preferred choice for deburring, cleaning and rust removal in bores
- Steel filaments expand as the brush rotates
HTWBPEN3029ST- Suitable for light-duty brushing applications
- Preferred choice for deburring, cleaning and rust removal in bores
- Steel filaments expand as the brush rotates
-
VC803300091
BlastOne has the parts needed to for your MiniBRS G2 Trigger Workheads. This is the Vacuum Workhead Trigger Guard (8033-000-91) for both pneumatic and electric versions.
VC803300091BlastOne has the parts needed to for your MiniBRS G2 Trigger Workheads. This is the Vacuum Workhead Trigger Guard (8033-000-91) for both pneumatic and electric versions.
-
VC803300084
BlastOne has the parts needed for your MiniBRS Workheads. This is the Outside Sleeve for flat brushes (MPN 8033-000-84), for both the pneumatic and electric versions.
VC803300084BlastOne has the parts needed for your MiniBRS Workheads. This is the Outside Sleeve for flat brushes (MPN 8033-000-84), for both the pneumatic and electric versions.
-
VC803300083
BlastOne has the parts needed for your MiniBRS G2 Trigger Workheads. This is the Trigger Workhead Rubber Gasket (8033-000-83) for both the pneumatic and electric versions.
VC803300083BlastOne has the parts needed for your MiniBRS G2 Trigger Workheads. This is the Trigger Workhead Rubber Gasket (8033-000-83) for both the pneumatic and electric versions.
-
The G2 Trigger Vacuum Workhead uses various brush types to enable it to work on inside and outside corners, as well as on flat surfaces. This group includes the following brush options:
- Replacement Flat Brush (Brush Only)
-
Inside Corner Brush Assembly (Includes Adapter, Brush, and Sleeve)
- Replacement Inside Corner Brush
-
Outside Corner Brush Assembly (Includes Adapter, Brush, and Sleeve)
- Replacement Outside Corner Brush
Note: Brushes are effective on surfaces up to 150°F.
-
HT4531310Upgrade your needle scaler with the Trelawny Copper Beryllium Needles, 3mm, SKU: HT4531310. These spark-resistant, flat tip needles are essential for specialized applications, ensuring safety and efficiency.
- 3mm flat tip design for precision work.
- Made from Copper Beryllium for spark resistance.
- Box contains 100 durable needles.
- MPN: 453.1310.
HT4531310Upgrade your needle scaler with the Trelawny Copper Beryllium Needles, 3mm, SKU: HT4531310. These spark-resistant, flat tip needles are essential for specialized applications, ensuring safety and efficiency.- 3mm flat tip design for precision work.
- Made from Copper Beryllium for spark resistance.
- Box contains 100 durable needles.
- MPN: 453.1310.
-
VC803300010
BlastOne has the parts needed for your MiniBRS Trigger Workheads. This is the #4 Nozzle (8033-000-10) for both the pneumatic and electric versions.
VC803300010BlastOne has the parts needed for your MiniBRS Trigger Workheads. This is the #4 Nozzle (8033-000-10) for both the pneumatic and electric versions.
Others—like the suction blasting gun, bristle blaster, or palm sander—are optimal for touch-up work or smaller use cases where a complete blasting set up would either be too cumbersome or impractical.
These tools have their strengths in specific circumstances. But they are also specialty tools—meaning they also have drawbacks in certain scenarios and limited versatility. It’s advisable to consult a technical expert about the job details and constraints before purchasing.