Blasting
Showing 181–195 of 949 results
-
BA50785K273High-pressure brass pipe fitting for use with:
- NPT female threads: Air, Water, BSP and metric threads: air, natural gas, oil, water
BA50785K273High-pressure brass pipe fitting for use with:- NPT female threads: Air, Water, BSP and metric threads: air, natural gas, oil, water
-
The Breather Vent is an essential component designed to prevent dust from entering the piston/cylinder top of the Thompson Valve II Metering Valve. Available in 1/8'' NPT or 1/4" NPT, this bronze silencer, brass strainer, and breather vent serves as an alternative replacement to Schmidt® 2152-000-17, or GV215200017. Sold individually, this Breather Vent ensures your system's longevity and optimal performance by maintaining a clean operating environment.
- Suits Thompson® Valve II Metering Valve
- 1/8'' NPT or 1/4" NPT - Bronze Silencer / Brass Strainer / Breather Vent
- An alternative replacement to Schmidt® 2152-000-17, or GV215200017
- Used to keep dust out of the piston/cylinder top of the Thompson valve
- Sold Individually
-
SBMGE
- Modified High-cube-style shipping container construction (20 ft, 40 ft)
- Watertight, Weatherproof design
- Completely self-contained for maximum portability
- Simple setup/installation
- Partial abrasive recovery system, with shovel-in hopper
- Available as fully assembled unit or retrofit kit
- Instant Preliminary Quotes Available on Request!
SBMGE- Modified High-cube-style shipping container construction (20 ft, 40 ft)
- Watertight, Weatherproof design
- Completely self-contained for maximum portability
- Simple setup/installation
- Partial abrasive recovery system, with shovel-in hopper
- Available as fully assembled unit or retrofit kit
- Instant Preliminary Quotes Available on Request!
-
IPC1003
- Replacement brake housing for RotorBlast Internal Pipe Blasting Tool
IPC1003- Replacement brake housing for RotorBlast Internal Pipe Blasting Tool
-
IPC1015
- Replacement rear end plate for RotorBlast Internal Pipe Blasting Tool
IPC1015- Replacement rear end plate for RotorBlast Internal Pipe Blasting Tool
-
FPSP25
- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
FPSP25- FPSP25, RB-2 Replacement 1" Threaded Plug
- For IPC1000 RotorBlast
- (Replaces part number IPC1001)
- Note: 4 of these are included in Spare Parts Kit, IPC1099
-
HTRAGWT
- Highly absorbent
- Sold as box of 220 pre-cut rags
- Cotton, pre-washed
- Recycled material
- Random cuts
- Low lint
- 25lb total weight
HTRAGWT- Highly absorbent
- Sold as box of 220 pre-cut rags
- Cotton, pre-washed
- Recycled material
- Random cuts
- Low lint
- 25lb total weight
-
-
INEBP45
- Tool used to identify the presence of water, oil or other contaminants in compressed air used for blasting and coating applications
- In accordance with ASTM D 4285 - attach a single piece of blotter paper to a solid backing using tape
- Paper can be marked upon with critical test information for later documentation and/or reference
- Pre-cut 6" x 6" pieces
INEBP45- Tool used to identify the presence of water, oil or other contaminants in compressed air used for blasting and coating applications
- In accordance with ASTM D 4285 - attach a single piece of blotter paper to a solid backing using tape
- Paper can be marked upon with critical test information for later documentation and/or reference
- Pre-cut 6" x 6" pieces
-
DMMEM200
- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
DMMEM200- Pop-top design, self cleaning
- Installs upright
- 1" (25mm) male thread connection
-
- Robots made by Blastman Robotics specifically for Blastroom applications
- Available as 4-Axis, 7-Axis or 8-Axis.
- Available as Wall Mount or Gantry Mount
- Optional Man cabin for manual blasting which can come mounted on the blasting arm, or as a separate cabin
- 20+ years of installation and robotic experience
- Read here for more pictures of Blastman Blasting Robots
-
- RPB blast suits enhance worker comfort and protect the wearer from abrasive rebound.
- The heavy-duty breathable cotton back helps keep you cool.
- Robust nylon zipper with protective cover
- Heavy-duty nylon gives extra protection to the arms and fronts of legs and has abrasion resistance for a longer life.
- Elasticized waist for a comfortable fit (takes the weight off the operator’s shoulders).
- Elasticized wrist and adjustable ankle cuffs to keep abrasive out.
- Seven different sizes from S to XXXXL.
- Triple stitched.
- Optional Knee Pads are available.
- Suit does not come with a hood.
- Sold Individually
- Genuine Products - Manufactured by RPB Safety
- See also BlastOne's new BlasterAlls Blast Suits
-
- Heavy-duty leather front for protection of arms and legs, extending coverall life.
- Strong cotton back for ventilation and comfort in hot climates.
- Ties at sleeves for adjustable fit, keeping out residue, media, and dust.
- Optional leather gauntlet gloves for added protection of hands and wrists.
- Available in six different sizes, from S to 3XL, ensuring a suitable fit for every operator.
- Press stud closures and Velcro strip fastening for double protection from grit ingress and resistance to damage from steel grit.
- Compatible with Nova3 blast helmets and blast capes (HLNV3752 or HLNV3753) for full leather front protection.
- Designed to meet the most stringent government guidelines.
- Tough cowhide covers ensure protection, while strong cotton back enables suit to ventilate for comfort in hot climates.
- Leather fronted sandblasting suits guarantee protection from harmful abrasive ricochet and momentary direct impact.
- Heavy-duty half leather fronted abrasive blasting suit (leather front extends from the waist down).
- Comfortable 'breathable' cotton back.
- Adjustable wrist and ankle straps.
- Front press stud and Velcro strip fastening.
- Most commonly used when blasting with steel grit media.
- Sold individually.
-
Step up your safety game with the Bullard Heavy Duty Nylon/Cotton Blast Suits. Expertly engineered for the professional blaster, these suits blend durability with comfort.
- Sweat-wicking fabric: Nylon-cotton blend for enhanced airflow
- Robust design: Parallel seams and extra reinforcement
- Optimized for professionals: Feature-rich and long-lasting
- Grey
- Size options: M, L, XL, 2XL, 3XL, 4XL
-
- Nylon webbing whipchecks - easier to install, less damaging to hose and will provide a longer service life
- The use of a whip check restraint is mandatory on all hoses. If you have any questions about the best restraint to use, please contact us directly.