Blasting Parts & Consumables
Showing 16–30 of 596 results
-
- Lenses Suitable for Clemco Apollo 60 and Apollo 600 Blast Helmet
- Inner Lens is your safety lens - works for both 60 & 600 Helmet - Sold as pack of 25
- Outer Lens protects the Inner from damage, as that is the most expensive lens - Sold as pack of 50
- Tear-Off Outer Lenses, work with an Outer lens, but allow the operator to keep working, tear off a lens and keep blasting - Sold as pack of 25
- Recommended upgrade from the Clemco Helmet is the RPB Nova 3 Blast Helmet - the worlds most comfortable Blast Helmet
-
APCMFCABCKThis 34L Calibration Kit covers everything you need to perform bump tests on Bullard Clean Air Boxes. Details as follows:
- Includes:
- 34L canister of Zero Air
- 34L canister of 10ppm Air
- Regulator
- Tubing
- Fitting
- Carrying Case
- The 34L gas canisters typically last about 25 tests.
APCMFCABCKThis 34L Calibration Kit covers everything you need to perform bump tests on Bullard Clean Air Boxes. Details as follows:- Includes:
- 34L canister of Zero Air
- 34L canister of 10ppm Air
- Regulator
- Tubing
- Fitting
- Carrying Case
- The 34L gas canisters typically last about 25 tests.
- Includes:
-
From gaskets and crabs to covers and bolts, BlastOne has all the replacement parts you need to repair the Handhole / Manway access panels for Axxiom / Schmidt blast pots.
- Special note: Be sure to try out the SureFit™ Handway gasket for the 6.5 pot. It makes installation much easier & faster. Lasts longer too!
- Note: Versions of these access assemblies have changed over the years. If any doubt which version you need, send us the model year and serial number of your blast pot to confirm the correct part before ordering.
-
GR120700Pipe fitters and maintenance workers routinely use these fittings in many applications. Details as follows:
- 1-¼" - 11 ½ NPTF thread size
- Carbon Steel, Hex Nipple Design - makes installation easier
- 3000 PSI Operating Pressure with 4:1 Safety factor
GR120700Pipe fitters and maintenance workers routinely use these fittings in many applications. Details as follows:- 1-¼" - 11 ½ NPTF thread size
- Carbon Steel, Hex Nipple Design - makes installation easier
- 3000 PSI Operating Pressure with 4:1 Safety factor
-
IPC3001The deflection tip in the ConeBlast Jr. internal pipe blaster is responsible for ensuring an even blast pattern. The abrasive stream hits the tip and fans out in a 360° pattern. It is subject to high wear and is a common replacement part. Additional details:
- Application: This tip works only in the ConeBlast Jr., not the larger ConeBlast version.
- Construction: This tip is made from tungsten carbide. For large pipe-cleaning projects, contact us for options on longer-life versions.
IPC3001The deflection tip in the ConeBlast Jr. internal pipe blaster is responsible for ensuring an even blast pattern. The abrasive stream hits the tip and fans out in a 360° pattern. It is subject to high wear and is a common replacement part. Additional details:- Application: This tip works only in the ConeBlast Jr., not the larger ConeBlast version.
- Construction: This tip is made from tungsten carbide. For large pipe-cleaning projects, contact us for options on longer-life versions.
-
The SnakeBite XP is the high-performance nozzle used in the highly successful SnakeBite XQ silenced configuration. As the XP uses a simple bump cap on the end (instead of the silencer), it does not have the noise and thrust reduction of the XQ. It is very fast and exceeds the performance of our hyper nozzle. Details as follows:
- Performance:
- The advanced modeling used when designing this Snakebite XP hyper nozzle has taken blasting performance to a whole new level. The refined internal geometry coupled with the non-silencing bump-cap produces very fast cleaning speed indeed.
- Liner:
- The new internal geometry when combined with the silicon nitride composition extends usable life greatly.
- Jacket:
- Anodized aluminum with ergonomic shape makes for a very comfortable grip.
- Sizes:
- Available in the following orifice sizes: 6, 7, 8, & 10
- Overall length varies from 10" to 13", depending on orifice size.
- Thread type:
- Available in standard 2" Contractor thread only. (See You May Also Like nozzle thread adapters below if you want to use with fine thread nozzle holders.)
- Performance:
-
BlastOne has the parts needed to service and maintain all Axxiom / Schmidt blast pots. The following are the common Pop Up components - contact us if you do not see the version you need. Pop-up Valve and Shaft (aka Pop-up Head)
- Hemispherical pop-up valve seals off pot when pressurized
- Shaft is embedded in the urethane head
- Suits Schmidt's contractor series blast pots
- Available in the following:
- MPN 2100-000, Small, for 1.5 CF pots
- MPN 2100-010, Standard, for 3.5, 6.5, 10, & 20CF pots
- MPN 2100-010-04, Alternate for Standard sizes, designed for high flow
- Available in the following:
- MPN 2100-001, Small, for 1.5 CF pots
- MPN 2100-011, Standard, for 3.5, 6.5, 10 & 20 CF pots
- MPN 2100-011-04, “Sure-Seal” Alternate for standard sizes, good when applications include blasting at low pressures. Use with 2100-010-04 pop-up head.
-
The latest member of our BlasterAll® family of products is our new Rigger gloves. It's styled like the original BlasterAll® blasting gloves, but without the extended gauntlet for more convenient every day use. Features include:
- Leather exterior for good abrasion resistance
- Extended cut resistance with Cut Level 5 Kevlar® lining
- Stylish & Comfortable design
- Touch-screen finger tip on index finger
- Extended size selection from X-Small to 2XL-Large
-
One size fits all general purpose leather work glove.
- Generous length gauntlet for lower arm protection
- Abrasive resistant threads provides longer life than normal ‘welding gloves’
- Tough, suede finish provides additional gripping power
- Available by the pair with discounts in dozen and case (5 dozen) quantities.
- Also see BlastOne's new BlasterAll Premium Leather Blasting Gloves
-
Experience safety and comfort with the Bullard Heavy Duty unlined leather Blast Gloves. Crafted using resilient Kevlar thread, these gloves are a fortress for your hands.
- Extra-long 8-inch cuff: Maximum forearm protection
- Kevlar thread construction: Exceptional strength and durability
- Reinforced cowhide palm: Enhanced grip and resilience
- Pre-curved fingers: Optimal hand mobility
- Available in sizes Medium - XX-Large
- Sold by the pair or in a pack of 6
-
Step up your hand protection with our Goat Skin Leather Driver Gloves, SKU: P-NA206. Combining value and durability, these unlined gloves offer sleek comfort and superior flexibility for everyday wear.
- Available in sizes S to XXL.
- Sold by the pair.
- Quantity and bulk discounts available.
-
GR157705Experience unmatched durability and efficiency with the 1/4" NPTM x 3/8" NPSF High Pressure Union Adaptor, SKU: GR157705. A must-have for industrial applications!
- Robust Construction: Engineered for high-pressure environments.
- Versatile Compatibility: Fits 1/4" NPTM and 3/8" NPSF connections seamlessly.
- Leak-Proof Design: Ensures a secure, tight seal every time.
- Easy Installation: Quick and hassle-free setup.
- Corrosion Resistant: Withstands harsh industrial conditions.
GR157705Experience unmatched durability and efficiency with the 1/4" NPTM x 3/8" NPSF High Pressure Union Adaptor, SKU: GR157705. A must-have for industrial applications!- Robust Construction: Engineered for high-pressure environments.
- Versatile Compatibility: Fits 1/4" NPTM and 3/8" NPSF connections seamlessly.
- Leak-Proof Design: Ensures a secure, tight seal every time.
- Easy Installation: Quick and hassle-free setup.
- Corrosion Resistant: Withstands harsh industrial conditions.
>>> Click to SEARCH <<<
If your unable to locate what you need, Contact Us today!
Navigating our extensive inventory is a breeze, thanks to our user-friendly online shop. With an easy-to-search platform, you can quickly find the exact part you’re looking for, be it for a specific valve, machine, or any other component. And if ever you’re unsure about the right part for your equipment, our exceptional customer service team is always on hand to guide you. With a deep understanding of sandblasting equipment, they will help you pinpoint the exact replacement part you need, ensuring minimal downtime and optimized performance.
In short, for all your sandblasting equipment repair part needs, look no further. From a vast selection of OEM parts, easy online shopping, to unmatched customer service support, we’ve got you covered. Ensure the longevity and efficiency of your equipment by choosing the best in the business.