All Products
Showing 91–105 of 1332 results
-
Genuine OEM lenses (aka blast shields) help keep your Bullard 88 blast hood NIOSH compliant. The details on the various versions of are as follows:
- Three Part Lens System includes:
- Inner Lens.
- 40 mil, clear, oval
- Outer Lens. Available in the following variations:
- 15 mil, clear, rectangular
- 15 mil, clear, rectangular w/protective film on both sides of lens
- 20 mil, clear, oval
- 30 mil, smoke tint, oval
- 40 mil, clear, oval
- 42 mil, green tint, oval
- Tear-off Lens. Available in the following variations.
- Perforated (Set of 5 individual tear-off lenses sealed together, saves time.) Packed 5 perforated sets (25 total lenses) per package.
- Adhesive backed (Individual tear-off lenses with adhesive strips.) Packed 25 lenses per package.
- Inner Lens.
- Packaging:
- Available in single packs, or in case quantities at reduced pricing.
- Three Part Lens System includes:
-
Upgrade your Bullard GVX blast hood with Bullard GenVX Genuine OEM Lenses, SKU: P-HVBGVXOEM. These lenses, designed to maintain NIOSH compliance, offer superior visibility and protection for blasting operators.
- Three-part lens system: Inner Lens (40 mil clear), Outer Lens (various thicknesses and tints), Tear-off Lens (perforated or adhesive backed).
- Available in single packs or bulk case quantities.
- Essential for maintaining visibility and protection during abrasive blasting.
-
- Lenses designed to fit the Bullard 88 Blast Helmet
- Sold by the Pack
- Three Part Lense system
- Inner Lens - Your thick eye protection layer
- Outer Lens - Protects the more costly inner lens
- Tear-off Lens - Allows you to tear it off and keep blasting
-
- Lenses Suitable for Clemco Apollo 60 and Apollo 600 Blast Helmet
- Inner Lens is your safety lens - works for both 60 & 600 Helmet - Sold as pack of 25
- Outer Lens protects the Inner from damage, as that is the most expensive lens - Sold as pack of 50
- Tear-Off Outer Lenses, work with an Outer lens, but allow the operator to keep working, tear off a lens and keep blasting - Sold as pack of 25
- Recommended upgrade from the Clemco Helmet is the RPB Nova 3 Blast Helmet - the worlds most comfortable Blast Helmet
-
The GX4 is a smart, sophisticated gas monitor designed to keep your employees safe and your company compliant with breathing air safety standards. Features as follows:
- Capable. Monitors up to 4 gases simultaneously, including CO (carbon monoxide), O2 (oxygen), and HS2 (hydrogen sulfide) using the GVS Cartridge Sensors.
- Note: Unit comes standard with the CO cartridge only. Cartridges never need calibrating and last up to 2 years. Regular calibration checks to be performed by using the GVS / RPB GX4 Calibration Regulator Kit.
- Intelligent. Continuously logs real-time data such as gas concentration, air temperature, unit status, etc.
- Connected. Utilize access to your company's network or connect directly with your device using the built-in Wi-Fi Hotspot mode.
- Flexible. Powered by either a 12 volt vehicle battery clips (using cable with battery clips) or by a rechargeable Lithium battery.
- Safe. Built-in 103db alarm demands attention when unit detects the contaminants above the programmed levels. For the ultimate in safety, choose the version with RZ fittings. The RZ fittings are designed to work only with GVS / RPB breathing air equipment and cannot be accidentally connected to shop nitrogen lines. Note: Using RZ fittings will require use of breathing air line and respirators with these fittings as well.
- Customizeable. The following options are available:
- GX4 Heavy Duty Field Case - protects your investment when your projects are remote.
- GX4 Auxiliary Strobe Light / Alarm / Cable
- Can be surface or wall-mounted using the GX4® wall bracket - or mounted directly to an RPB® Radex Airline Filter.
- Genuine Product - Manufactured by GVS/RPB® and NIOSH approved with the Radex Breathing Air filter.
AVAILABLE FOR RENTAL OR PURCHASE
- Capable. Monitors up to 4 gases simultaneously, including CO (carbon monoxide), O2 (oxygen), and HS2 (hydrogen sulfide) using the GVS Cartridge Sensors.
-
APCMFCABCKThis 34L Calibration Kit covers everything you need to perform bump tests on Bullard Clean Air Boxes. Details as follows:
- Includes:
- 34L canister of Zero Air
- 34L canister of 10ppm Air
- Regulator
- Tubing
- Fitting
- Carrying Case
- The 34L gas canisters typically last about 25 tests.
APCMFCABCKThis 34L Calibration Kit covers everything you need to perform bump tests on Bullard Clean Air Boxes. Details as follows:- Includes:
- 34L canister of Zero Air
- 34L canister of 10ppm Air
- Regulator
- Tubing
- Fitting
- Carrying Case
- The 34L gas canisters typically last about 25 tests.
- Includes:
-
The Radex airline filter (aka canister filter) is the heart of the GVS / RPB breathing air system. Features as follows:
- Advanced Filtration. 6-stage filtering removes oils, odors, moisture, and particulates from breathing air
- Durable. Cast aluminum construction for lightweight durability on jobsites as well as in factories.
- Flexible. Can be either floor or wall mounted using the included twist-and-lock bracket
- Customizable. Comes with either 2-outlets (1 for an operator and 1 for the CO monitor) or 6 outlets. And if you already have a 2-outlet version and need to upgrade to 6, this can be done with the Radex Six Outlet Upgrade Kit.
- Other included features.
- 150 PSI safety pressure relief valve
- Chicago 2-claw coupling inlet port
- Quick Connect outlet ports
- Brass manual drain tap
- Pressure regulator to adjust outlet air pressure
- Replaceable APF3100 filter element (lasts up to 3 months or 400 working hours)
- Options.
- Auto Drain Unit. Automatically drains moisture from Radex, helping to prevent premature failure to the filter element due to maintenance oversight.
- Micro Mist Filter. Further removes moisture and oil. Recommended if compressor has possible moisture or oil blow-by issues. Reduces chance of oil contamination of CO monitor sensor.
- Mainline Pre-Filter. Extra support for particulate removal down to 0.15 microns and extends life of primary filter element.
NOTE: This unit does not filter or monitor carbon monoxide (CO). It is designed to be used with the RPB GX4 Carbon Monoxide monitor.
-
INDCMMISSS10PKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment. Salt solution packets for Positector® CMM IS measuring probes come in packs of 10. The salt packets are part of the calibration-check process, and are used in the calibration container. MPN: CMMISSS10PKINDCMMISSS10PKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment. Salt solution packets for Positector® CMM IS measuring probes come in packs of 10. The salt packets are part of the calibration-check process, and are used in the calibration container. MPN: CMMISSS10PK
-
FREE Shipping 30 Day Money-Back Guarantee|Free Returns 90 Day Manufacturer Warranty
- Most common contractor size, combining portability with productivity
- When using premium garnet media, this pot will blast for around 1.5 hours before you need to refill
- Capacity of 6.5 cu ft, which equates to 950lbs of a dense media like premium GMA Garnet
- Pressure Rating: 150psi
- Blast Pot Deadman Control System with 50 feet of control line and handle
- Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in Order Comments field
-
INDCMMISSTK10PKExtensions are used to extend the reach of the DeFelsko CMM IS concrete measuring meters. Each new meter comes standard with 2 extensions, allowing testing for a 4 inch concrete slab. Thicker slabs may require these extensions to obtain accurate test results, and are available separately in packs of 10.INDCMMISSTK10PKExtensions are used to extend the reach of the DeFelsko CMM IS concrete measuring meters. Each new meter comes standard with 2 extensions, allowing testing for a 4 inch concrete slab. Thicker slabs may require these extensions to obtain accurate test results, and are available separately in packs of 10.
-
Peak-to-valley height (aka Surface Profile) is a critical measurement for calculating expected coating performance, meeting coating manufacturer specifications, and estimating coverage requirements. Measuring surface profile has been done successfully for over 50 years with the Testex replica tape and spring micrometers. DeFelsko offers multiple Analog options for these spring micrometers (aka Snap Gages, or Dial Thickness Gages), as follows:
- Certified. Available in:
- Imperial / Mils
- Metric / Microns
- Non-Certified. Available in:
- Imperial / Mils
- Metric / Microns
- Linearized in Mils
- Package Options. Available as:
- Basic Micrometer kits (aka Dial Thickness Gage Micrometer), including choice of snap gage, plastic burnishing tool, carrying case, instructions & 1 year warranty.
- Complete kits (aka Replica Tape Kits), including Basic kit above as well as Training Surface Tool, and 1 roll each of Testex Press-O-Film Coarse and X-Coarse tapes.
- (Digital Replica Tape Readers also available, see details on their separate page.)
- Certified. Available in: