My Account
All Products
Showing 91–105 of 1329 results
-
INDBHIINDENTORThe indentor for the PosiTector BHI Barcol Hardness Impressor is the tip of the probe, used in obtaining the measurements. A spare indentor and replacement tool are included with each new DeFelsko BHI kit. This item is a set of 2 tips with tool, and is available separately as a replacement order item. MPN: BHIINDENTORINDBHIINDENTORThe indentor for the PosiTector BHI Barcol Hardness Impressor is the tip of the probe, used in obtaining the measurements. A spare indentor and replacement tool are included with each new DeFelsko BHI kit. This item is a set of 2 tips with tool, and is available separately as a replacement order item. MPN: BHIINDENTORPart Number Purchase Price INDBHIINDENTOR $80.00 Replacement indentors for DeFelsko® PosiTector® BHI hardness probe
Part #INDBHIINDENTOR
View Product DetailsWeb price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$80.00
-
-
- Lenses Suitable for Clemco Apollo 60 and Apollo 600 Blast Helmet
- Inner Lens is your safety lens - works for both 60 & 600 Helmet - Sold as pack of 25
- Outer Lens protects the Inner from damage, as that is the most expensive lens - Sold as pack of 50
- Tear-Off Outer Lenses, work with an Outer lens, but allow the operator to keep working, tear off a lens and keep blasting - Sold as pack of 25
- Recommended upgrade from the Clemco Helmet is the RPB Nova 3 Blast Helmet - the worlds most comfortable Blast Helmet
-
The GX4 is a smart, sophisticated gas monitor designed to keep your employees safe and your company compliant with breathing air safety standards. Features as follows:
- Capable. Monitors up to 4 gases simultaneously, including CO (carbon monoxide), O2 (oxygen), and HS2 (hydrogen sulfide) using the GVS Cartridge Sensors.
- Note: Unit comes standard with the CO cartridge only. Cartridges never need calibrating and last up to 2 years. Regular calibration checks to be performed by using the GVS / RPB GX4 Calibration Regulator Kit.
- Intelligent. Continuously logs real-time data such as gas concentration, air temperature, unit status, etc.
- Connected. Utilize access to your company's network or connect directly with your device using the built-in Wi-Fi Hotspot mode.
- Flexible. Powered by either a 12 volt vehicle battery clips (using cable with battery clips) or by a rechargeable Lithium battery.
- Safe. Built-in 103db alarm demands attention when unit detects the contaminants above the programmed levels. For the ultimate in safety, choose the version with RZ fittings. The RZ fittings are designed to work only with GVS / RPB breathing air equipment and cannot be accidentally connected to shop nitrogen lines. Note: Using RZ fittings will require use of breathing air line and respirators with these fittings as well.
- Customizeable. The following options are available:
- GX4 Heavy Duty Field Case - protects your investment when your projects are remote.
- GX4 Auxiliary Strobe Light / Alarm / Cable
- Can be surface or wall-mounted using the GX4® wall bracket - or mounted directly to an RPB® Radex Airline Filter.
- Genuine Product - Manufactured by GVS/RPB® and NIOSH approved with the Radex Breathing Air filter.
AVAILABLE FOR RENTAL OR PURCHASE
- Capable. Monitors up to 4 gases simultaneously, including CO (carbon monoxide), O2 (oxygen), and HS2 (hydrogen sulfide) using the GVS Cartridge Sensors.
-
APCMBCOHPThe Bullard COHP is a stand-alone Carbon Monoxide monitor, and is designed to be used in tandem with a Bullard breathing air canister filtration system. Additional details include:- Does NOT remove carbon monoxide - this is a monitor only.
- This 10PPM unit is intended for the USA market. (5PPM versions available for other Canada and other markets.)
- Provides audible (90dB) and visual alarms when high CO, low battery, or low airflow conditions are present.
- Operates on either AC or DC power.
APCMBCOHPThe Bullard COHP is a stand-alone Carbon Monoxide monitor, and is designed to be used in tandem with a Bullard breathing air canister filtration system. Additional details include:- Does NOT remove carbon monoxide - this is a monitor only.
- This 10PPM unit is intended for the USA market. (5PPM versions available for other Canada and other markets.)
- Provides audible (90dB) and visual alarms when high CO, low battery, or low airflow conditions are present.
- Operates on either AC or DC power.
-
APCMFCABCKThis 34L Calibration Kit covers everything you need to perform bump tests on Bullard Clean Air Boxes. Details as follows:- Includes:
- 34L canister of Zero Air
- 34L canister of 10ppm Air
- Regulator
- Tubing
- Fitting
- Carrying Case
- The 34L gas canisters typically last about 25 tests.
APCMFCABCKThis 34L Calibration Kit covers everything you need to perform bump tests on Bullard Clean Air Boxes. Details as follows:- Includes:
- 34L canister of Zero Air
- 34L canister of 10ppm Air
- Regulator
- Tubing
- Fitting
- Carrying Case
- The 34L gas canisters typically last about 25 tests.
Part Number Purchase Price APCMFCABCK $577.50 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$577.50
-
- Includes:
-
The Radex airline filter (aka canister filter) is the heart of the GVS / RPB breathing air system. Features as follows:
- Advanced Filtration. 6-stage filtering removes oils, odors, moisture, and particulates from breathing air
- Durable. Cast aluminum construction for lightweight durability on jobsites as well as in factories.
- Flexible. Can be either floor or wall mounted using the included twist-and-lock bracket
- Customizable. Comes with either 2-outlets (1 for an operator and 1 for the CO monitor) or 6 outlets. And if you already have a 2-outlet version and need to upgrade to 6, this can be done with the Radex Six Outlet Upgrade Kit.
- Other included features.
- 150 PSI safety pressure relief valve
- Chicago 2-claw coupling inlet port
- Quick Connect outlet ports
- Brass manual drain tap
- Pressure regulator to adjust outlet air pressure
- Replaceable APF3100 filter element (lasts up to 3 months or 400 working hours)
- Options.
- Auto Drain Unit. Automatically drains moisture from Radex, helping to prevent premature failure to the filter element due to maintenance oversight.
- Micro Mist Filter. Further removes moisture and oil. Recommended if compressor has possible moisture or oil blow-by issues. Reduces chance of oil contamination of CO monitor sensor.
- Mainline Pre-Filter. Extra support for particulate removal down to 0.15 microns and extends life of primary filter element.
NOTE: This unit does not filter or monitor carbon monoxide (CO). It is designed to be used with the RPB GX4 Carbon Monoxide monitor.
-
The GVS / RPB PAPR units redefine what it means to be a powered air purifying respirator with comfort being a priority along with safety. The 2 versions (PX5 and HX5) are very similar and both offer a long list of features. A document comparing the PX5 vs the HX5 is under the Documents tab. Features and benefits are as follows:
- Sleek and modern. Strategically distributes weight through it's mounting.
- Light weight. Weighing as little as 2.55 lbs, they are designed to fit comfortably for all-day use.
- Positive Pressure. Removes the hassle and expense of fit testing and clean-shaven requirements.
- Comfortable.
- The PX5 has 3 different air-flow speeds.
- The HX5 has a single air-flow speed.
- Versatile. Variety of PX5 filters and cartridges available for various applications including HEPA for particulates, as well as Organic Vapor (OV), Acid Gas (AG), and Multi-Gas. The HX5 is compatible with the HEPA filter only.
- Safe. They alarm when the battery is low and when the airflow is blocked. The PX5 has visual, audible, and vibrating alarms, making them great for high-noise environments. The HX5 has the visual and audible alarms only. Both units are designed to prevent use if filter is not installed.
- Flexible. Available in the following configurations:
- Battery. PX5 / HX5 PAPR batteries are available in standard or high capacities.
- Mounts. Available with a standard belt or an optional back-pack mount.
- Ratings. Available with an optional FR rating. Offers a spark arrestor insert to protect the filters while welding or grinding.
- Cleanable. The PX5 ingress is certified to IP65 (light spray) and can be decontaminated easily. The HX5 is certified to IP53 (wipe-down ).
- Easy-to-use. Intuitive LED user interface indicates airflow, fan speed, and battery level.
- Portable. Without an attached airline (or need for compressed air), these PAPR systems makes it easy to perform your work safely.
Note: PAPR systems circulate filtered ambient air, and are not compatible with climate control devices or cool tubes.
Additional Note: Contact us before purchasing if product will be used in an explosive atmosphere.
-
The Bullard EVA (Evolutionary Air) PAPR systems are innovative and well balanced, and offer portable respiratory protection for both their loose-fitting and tight-fitting respirators. The Bullard EVA series is black with white trim. The EVAHL (Hazardous Location) version offers all the benefits of the original EVA, with the additional capability of being rated for the HazLoc environments. The EVAHL series is black with blue trim and has the following certifications:
- Class I, Division 2
- Class II, Division 2
- Class III
Features include:
- Visual fuel gauge on battery
- Two blower speeds controlled with a single button, designed for quiet operation
- Active Flow Technology - Blower speed remains constant even as filter or cartridge resistance increases
- Low battery and airflow alarms
- Filter / cartridge locking tab for visual confirmation of correct installation
Available as Blower-only, or with the following Standard Package Configurations:
- Belt choices:
- Closed Cell Foam (adjustable from 28" to 60")
- Decon-Friendly Vinyl Urethane (adj. from 28" to 60")
- (Note: Belt Extender, Belt Suspender, and Backpack options also available separately.)
- Batteries (Li-Ion) and Chargers:
- EVA Battery for all ordinary location respirators except Spectrums (Black)
- EVA Battery for Spectrums (Green)
- EVAHL Battery for HazLoc respirators (Black)
- Packages available with or without a single battery charger
- (Note: Optional 6-gang chargers also available - order separately.)
- Filters and Cartridges:
- Packages available with HEPA filter, or without filters
- (Note: Combination HE/OV & HE/Acid Gas cartridges, and Prefilters are available separately.)
- Other Features:
- All packages include airflow indicator
NOTE: MAXXXLife is a user-friendly calculator that helps measure the service life of your Bullard air-purifying respirator cartridge.
-
INDCMMISSS10PKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment. Salt solution packets for Positector® CMM IS measuring probes come in packs of 10. The salt packets are part of the calibration-check process, and are used in the calibration container. MPN: CMMISSS10PKINDCMMISSS10PKBlastOne offers all accessories and replacement parts for DeFelsko testing equipment. Salt solution packets for Positector® CMM IS measuring probes come in packs of 10. The salt packets are part of the calibration-check process, and are used in the calibration container. MPN: CMMISSS10PKPart Number Purchase Price INDCMMISSS10PK $25.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$25.00
-
-
FREE Shipping
30 Day Money-Back Guarantee|Free Returns
90 Day Manufacturer Warranty
- Most common contractor size, combining portability with productivity
- When using premium garnet media, this pot will blast for around 1.5 hours before you need to refill
- Capacity of 6.5 cu ft, which equates to 950lbs of a dense media like premium GMA Garnet
- Pressure Rating: 150psi
- Blast Pot Deadman Control System with 50 feet of control line and handle
- Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in Order Comments field
-
INDCMMISSTK10PKExtensions are used to extend the reach of the DeFelsko CMM IS concrete measuring meters. Each new meter comes standard with 2 extensions, allowing testing for a 4 inch concrete slab. Thicker slabs may require these extensions to obtain accurate test results, and are available separately in packs of 10.INDCMMISSTK10PKExtensions are used to extend the reach of the DeFelsko CMM IS concrete measuring meters. Each new meter comes standard with 2 extensions, allowing testing for a 4 inch concrete slab. Thicker slabs may require these extensions to obtain accurate test results, and are available separately in packs of 10.Part Number Purchase Price INDCMMISSTK10PK $20.00 Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.$20.00
-
-
Peak-to-valley height (aka Surface Profile) is a critical measurement for calculating expected coating performance, meeting coating manufacturer specifications, and estimating coverage requirements. Measuring surface profile has been done successfully for over 50 years with the Testex replica tape and spring micrometers. DeFelsko offers multiple Analog options for these spring micrometers (aka Snap Gages, or Dial Thickness Gages), as follows:- Certified. Available in:
- Imperial / Mils
- Metric / Microns
- Non-Certified. Available in:
- Imperial / Mils
- Metric / Microns
- Linearized in Mils
- Package Options. Available as:
- Basic Micrometer kits (aka Dial Thickness Gage Micrometer), including choice of snap gage, plastic burnishing tool, carrying case, instructions & 1 year warranty.
- Complete kits (aka Replica Tape Kits), including Basic kit above as well as Training Surface Tool, and 1 roll each of Testex Press-O-Film Coarse and X-Coarse tapes.
- (Digital Replica Tape Readers also available, see details on their separate page.)
- Certified. Available in:
-
From gaskets and crabs to covers and bolts, BlastOne has all the replacement parts you need to repair the Handhole / Manway access panels for Axxiom / Schmidt blast pots.
- Special note: Be sure to try out the SureFit™ Handway gasket for the 6.5 pot. It makes installation much easier & faster. Lasts longer too!
- Note: Versions of these access assemblies have changed over the years. If any doubt which version you need, send us the model year and serial number of your blast pot to confirm the correct part before ordering.
-
- Hi-Tech Microfiber fabric technology
- Unique 5 layer protection in a popular coveralls / overalls design
- Lighter and more breathable offering superior operator comfort
- Anti-static and CE Type 5/Type 6 protection
- Come in boxes of 50
-
VELOCITYTechnology insertion to exponentially increase shipyard blast and coat production. COMPONENTS & FEATURES The individual technologies include, but are not limited to:- Intelliblast Blast Pot Controls:
- Smart controls that optimize blasting parameters for maximum efficiency and effectiveness.
- Snakebite Blasting Nozzles
- High-performance nozzles designed for precise and powerful material removal, reducing blasting time and lowering process noise.
- Rapidly Deployable Containments
- Innovative containment systems that can be quickly deployed, ensuring a controlled environment, and minimizing the spread of contaminants.
- Vortex Airflow Movement
- Proprietary airflow design that lowers energy consumption, enhances ventilation, and ensures the efficient removal of particles from the blasting and painting areas.
- Combination Dual Air Plenums
- Dual air plenums that provide a uniform and controlled airflow, optimizing the blasting and painting processes.
- Energy Recovery System (ERS)
- An energy recovery system that captures and recycles heat energy, reducing overall energy consumption and operational costs
- Robot Ready Design
- A structure and system that is designed to be capable of supporting automated process equipment
- Faster production cycles
- Reduced operational costs
- Enhanced environmental sustainability
- Improved worker safety
VELOCITYTechnology insertion to exponentially increase shipyard blast and coat production. COMPONENTS & FEATURES The individual technologies include, but are not limited to:- Intelliblast Blast Pot Controls:
- Smart controls that optimize blasting parameters for maximum efficiency and effectiveness.
- Snakebite Blasting Nozzles
- High-performance nozzles designed for precise and powerful material removal, reducing blasting time and lowering process noise.
- Rapidly Deployable Containments
- Innovative containment systems that can be quickly deployed, ensuring a controlled environment, and minimizing the spread of contaminants.
- Vortex Airflow Movement
- Proprietary airflow design that lowers energy consumption, enhances ventilation, and ensures the efficient removal of particles from the blasting and painting areas.
- Combination Dual Air Plenums
- Dual air plenums that provide a uniform and controlled airflow, optimizing the blasting and painting processes.
- Energy Recovery System (ERS)
- An energy recovery system that captures and recycles heat energy, reducing overall energy consumption and operational costs
- Robot Ready Design
- A structure and system that is designed to be capable of supporting automated process equipment
- Faster production cycles
- Reduced operational costs
- Enhanced environmental sustainability
- Improved worker safety
Part Number Purchase Price VELOCITY Request Quote Web price iPlease sign in to your account to see your pricing, which may be different from the price displayed.Request Quote
-
- Intelliblast Blast Pot Controls:
