Blasting
Showing 61–75 of 965 results
-
APCMB8422
- Sensor Manifold Tube (08-422)
- Use with GX4
- Genuine RPB product
APCMB8422- Sensor Manifold Tube (08-422)
- Use with GX4
- Genuine RPB product
-
APCMB8428
- Air Supply Hose (08-428)
- Use with GX4
- Genuine RPB product
APCMB8428- Air Supply Hose (08-428)
- Use with GX4
- Genuine RPB product
-
APCMB8420
- Blank Sensor Case (08-420)
- Use with GX4
- Genuine RPB product
APCMB8420- Blank Sensor Case (08-420)
- Use with GX4
- Genuine RPB product
-
APCMB8470RZ
- RZ fitted External Flow Regulator (08-470-RZ)
- Use with GX4 Gas Monitor
- Genuine RPB product
APCMB8470RZ- RZ fitted External Flow Regulator (08-470-RZ)
- Use with GX4 Gas Monitor
- Genuine RPB product
-
Power supply options for the GX4 Gas Monitor include:
- 12V Cable with Battery Clips (08-431)
- 110V Power Adaptor Pack (08-430)
-
Snakebite. The world's quietest blast nozzle!
- Up to 16dBA noise reduction
- Up to 45% less fatigue compared to standard blast nozzles
- Improved nozzle geometry
- New technology quick-connect nozzle silencer
- Durable and lightweight Silicon Nitride nozzle and silencer liner
- Slimline ergonomic nozzle jacket
- Standard contractor nozzle inlet thread
- 2 versions available
- Standard Pressure Nozzle effective between 90-110 psi
- Low Pressure (LPS) Nozzle effective between 70-90 psi
- FREE TRIAL AVAILABLE
-
All the power. Half the size!
- Up to 16dBA noise reduction
- Up to 45% less fatigue compared to standard blast nozzles
- Improved nozzle geometry
- New technology quick-connect nozzle silencer
- Durable and lightweight Silicon Nitride nozzle and silencer liner
- Slimline ergonomic nozzle jacket
- Standard contractor nozzle inlet thread
- 2 versions available
- Standard Pressure Nozzle effective between 90-110 psi
- Low Pressure (LPS) Nozzle effective between 70-90 psi
- FREE TRIAL AVAILABLE
Act quick! Limited supply.
-
BNSBXQ10-1
- WATCH VIDEO IN THE IMAGE SLIDER
- Highest productivity hand held blast nozzle available
- Over double the productivity of a #8 high performance blast nozzle with less operator fatigue
- Half the thrust of other #10 blast nozzles available - Feels like you're blasting with a #7 nozzle
- Up to 16dBA noise reduction - That's 75% quieter!
- Ideal for blasting acres of steel such as storage tanks, bridges and ship hulls
- Standard contractor nozzle inlet thread
- Delivers faster cleaning rates and increased profit by reducing project duration
- Requires 750cfm compressor
- FREE TRIAL AVAILABLE!
BNSBXQ10-1- WATCH VIDEO IN THE IMAGE SLIDER
- Highest productivity hand held blast nozzle available
- Over double the productivity of a #8 high performance blast nozzle with less operator fatigue
- Half the thrust of other #10 blast nozzles available - Feels like you're blasting with a #7 nozzle
- Up to 16dBA noise reduction - That's 75% quieter!
- Ideal for blasting acres of steel such as storage tanks, bridges and ship hulls
- Standard contractor nozzle inlet thread
- Delivers faster cleaning rates and increased profit by reducing project duration
- Requires 750cfm compressor
- FREE TRIAL AVAILABLE!
-
- Replacement silencers for the SnakeBite family of blast nozzles
- Up to 45% less operator fatigue
- Up to 16dB noise reduction
- 2 versions available
- Standard Pressure Silencer effective between 90-110 psi
- Low Pressure Silencer (LPS) effective between 70-90 psi
-
This general-purpose nozzle was designed for everyday use, only better - it lasts longer and offers greater ease of use! It features the following:
-
Performance characteristics:
- Venturi design provides up to 40% faster production than straight bore versions.
-
Thread type & Orifice Size options:
- Contractor 2" (50mm)
- Fine 1-¼" (32mm)
- Orifice size options: 3, 4, 5, 6, 7, 8
-
Liner:
- Silicon nitride, provides longer life and lighter weight than tungsten carbide.
-
Jacket:
- All-polyurethane – reduces ‘jams’ in metal nozzle holders
- Shock absorbent, lightweight urethane jacket protects the blast nozzle liner
-
Design:
- 1" throat entry on #3 and #4 Contractor thread AND all Fine thread options
- 1-¼" throat entry on #5, 6, 7, and 8 Contractor threads
-
Additional notes:
- Approximately half the weight of standard tungsten carbide nozzles.
- Although the up-front cost is higher than tungsten carbide, the longer life Ultra-Tuff offers same or better total cost of ownership.
-
Performance characteristics:
-
The blast nozzle for the ConeBlast Internal Pipe Blaster is a key element in controlling the volume of air/abrasive flow. It is subject to high wear and is a common replacement part. Additional details:
- Sizes. Two sizes are available, depending on the capacity of your compressed air source.
- BNAFR8 requires 250CFM
- BNARF10 requires 400CFM
- (The size variants are interchangeable.)
- Construction. These nozzles are made from tungsten carbide. For large pipe-cleaning projects, contact us for options on longer-life versions.
- Sizes. Two sizes are available, depending on the capacity of your compressed air source.
-
Designed with an extra-long venturi and concentrated blast pattern, the Hyper (aka XL or Saber) nozzle increases performance substantially. Additional details as follows: Click for Buying Guide
- Performance characteristics:
- Up to 30% faster coating removal and/or
- Allows greater stand-off distance (reduces need to bend over when blasting tank floors, allows greater reach, etc.)
- Thread types & Orifice Size options:
- Contractor 2" (50mm)
- Fine 1-¼" (32mm)
- Orifice size options: 5, 6, 7, 8, & 10
- Liner:
- SiALON silicon nitride, provides longer life and lighter weight than tungsten carbide.
- Jacket:
- All aluminum, non-slip knurled finish
- Design:
- 1-¼" throat entry, extended venturi, 12 inches long
- Performance characteristics:
-
Designed with a 60% larger blast pattern, the Raptor (aka Bazooka) nozzle makes short work of your large commercial blast / sweep blast / brush blast projects. Additional details as follows:
-
Thread types:
- Contractor (2") aluminum threads
- Fine (1-¼") brass threads
-
Liner:
- Silicon nitride, offers lighter weight and longer life than tungsten carbide.
-
Jacket:
- Urethane, for improved resistance to damage
-
Design:
- 1-¼" throat entry, extended venturi
-
Thread types:
-
Standard Tungsten Carbide (aka TVP) blast nozzles are widely used and are a lower-cost, basic general-purpose nozzle with the following characteristics: Click for Buying Guide
- Performance characteristics:
- Venturi design offers up to 40% greater production than straight bore.
- Thread Types:
- 1-1/4" NPSM (32mm) brass fine threads
- 2" (50mm) aluminum contractor threads
- Flange type (unthreaded, and attaches to a blast hose with a standard blast hose quick coupling instead of a nozzle holder)
- Orifice Sizes:
- Contractor & Fine: 3, 4, 5, 6, 7, 8, 10, 12
- Flanged: 6, 7, 8, 10, 12
- Liner:
- Tungsten Carbide, provides longer life than disposable alternatives for industrial blasting projects
- Jacket:
- Contractor and Fine thread versions have poly jacket
- Flanged type is an all-aluminum jacket
- Design:
- 1" (25mm) throat entry for #3 and #4 sizes
- 1 1/4" (32mm) throat entry, for all other sizes
- Additional notes:
- Lowest up-front cost of any industrial blast nozzle.
- Higher weight and shorter lifespan than premium silicon nitride versions.
- Lower total cost of ownership, higher performance, and/or improved ease-of-use may be achieved with one of the premium nozzle options. See You May Also Like below.
- Performance characteristics: