Rental & Site Equipment
Showing 1–15 of 61 results
-
Portable Sponge-Jet recyclers are specially designed to reduce abrasive costs and increase sustainability when sponge blasting. These units separate used media into 3 streams: 1) Good reusable media. 2) Oversized waste. 3) Fine waste. A variety of configurations are available to support various project sizes & scopes. All units are available as either pneumatically or electrically powered, and can be equipped with various screen mesh sizes for either faster productivity or greater dust removal.
- 35 Series
- Compact. 300 lbs (pneumatic) or 325 lbs (electric)
- Single screen model
- Designed for the production of a single feed unit with a rated speed of 15 lbs per minute
- Pneumatic version requires 40 cfm. Electric version requires a 20a breaker at 110v, 60hz.
- Available options:
- Additional screen mesh sizes
- Lifting frame
- Magnetic separator
- 50 Series
- Larger deck area than the 35 series
- Single screen model
- Available options
- Closed top, for use with vacuum recovery systems or overhead hoppers
- Additional screen mesh sizes
- Recycler stand
- Non-stock special order
- 70 Series
- Multi-screen model for increased processing speed and better dust removal compared to single screen
- Designed to support 2 feed units, with a rated speed of 26 lbs per minute
- 600 lbs (pneumatic) or 650 lbs (electric)
- Pneumatic version requires 46 CFM. Electric version requires a 30a breaker at 110v, 60hz.
- Available options:
- Magnetic separator
- 2-screen version (Default is #3 top and #16 bottom unless otherwise specified)
- 3-screen version (Default is #3 top, #8 mid, and #16 bottom unless otherwise specified).
- Bottom screen can be replaced with #12 for lowest dust levels or #24 for max media life.
Note: Due to our distribution agreement with Sponge-Jet, pricing is not shown on our website. Contact us for fast, competitive pricing or send in the web-form quote request.
- 35 Series
-
Portable Sponge-Jet® feed units (aka Sponge Pots) come in a variety of configurations to suit almost every application. From small, value-based units to fully featured machines, sponge feed units are designed for the ultimate in low-dust abrasive blasting. Seven configurations are available, as follows:
- RASP Xtreme™ 3:
- Highly portable & fits thru a 24 inch manway
- Holds 1 bag of new sponge media (5-7 minutes)
- Includes pressure relief valve (PRV) & integrated wheels
- Great for spot work
- 127 lb. empty weight
- 100-HP Feed Unit™:
- Great balance between size, cost & blast time
- Fits through a 30" doorway
- Holds 3 bags of new sponge media
- Includes PRV, secondary moisture separator & wheels
- Great for preservation work
- 480 lb. empty weight
- CG Series (Contractor Grade Series):
- 2 sizes available:
- 170-CG - holds 5 bags of new sponge media
- 470-CG - holds 13 bags of new sponge media
- Value series - ideal where few features are required
- Includes fork pockets
- Great for yard work
- 600 lb. / 1142 lb. empty weights for 170-CG / 470-CG
- 2 sizes available:
- SJ Series (Feed Unit Series):
- 2 sizes available:
- 170-SJ - holds 5 bags of new sponge media
- 170-EX - similar to 170-SJ, but ATEX 2 rated for potentially flammable environments
- 470-SJ - holds 13 bags of new sponge media
- Fully featured, includes:
- Pressure relief valve
- Secondary moisture separator
- Muffler
- Frame w/casters and lifting lugs
- Centralized controls
- Great for field work
- 900 lb / 1000 lb / 1515 lb empty weights respectively
- 2 sizes available:
- RASP Xtreme™ 3:
-
- The Nova 3 Blast Helmet is the industry #1 for operator comfort
- Has comfort padding inside like a motorcycle helmet, which means it distributes the weight evenly, and also turns with your head
- Gives up to 20dB noise attenuation
- NIOSH Safety Approval with a 1000 APF (assigned protection factor)
-
Sold as a complete kit with the following variations:
-
Cape Options:
- Standard Length Nylon Cape
- Extended Nylon Cape
- Standard Leather Cape
- Extended Leather Cape
- XL Blast Jacket
- XXL Blast Jacket
-
Climate Options:
-
Supplied air offers:
- C40 Heating and Cooling
- Cool Air Tube
- Hot Air Tube
- Air Control Valve
-
PAPR offers:
- Air Control Valve only
- (PAPR version is intended for low dust applications such as pot tending, inspection, etc.)
-
Supplied air offers:
-
Cape Options:
- Genuine Products – Manufactured by RPB Safety
-
SBPL05WElevate your paint booth's efficiency and safety with the Liftman Pneumatic Paint Booth Personnel Manlift, Twin Wheel Version, SKU: SBPL05W. This pneumatic lift is ideal for explosion-sensitive areas, reaching a working height of up to 14' 9".
- Twin Wheel Version for stable and smooth operation.
- Pneumatically operated, ensuring safety in explosive environments.
- Self-centering steering for effortless maneuverability.
- CE, CAS, UL certified and ATEX compliant.
SBPL05WElevate your paint booth's efficiency and safety with the Liftman Pneumatic Paint Booth Personnel Manlift, Twin Wheel Version, SKU: SBPL05W. This pneumatic lift is ideal for explosion-sensitive areas, reaching a working height of up to 14' 9".- Twin Wheel Version for stable and smooth operation.
- Pneumatically operated, ensuring safety in explosive environments.
- Self-centering steering for effortless maneuverability.
- CE, CAS, UL certified and ATEX compliant.
-
This general-purpose nozzle was designed for everyday use, only better - it lasts longer and offers greater ease of use! It features the following:
-
Performance characteristics:
- Venturi design provides up to 40% faster production than straight bore versions.
-
Thread type & Orifice Size options:
- Contractor 2" (50mm)
- Fine 1-¼" (32mm)
- Orifice size options: 3, 4, 5, 6, 7, 8
-
Liner:
- Silicon nitride, provides longer life and lighter weight than tungsten carbide.
-
Jacket:
- All-polyurethane – reduces ‘jams’ in metal nozzle holders
- Shock absorbent, lightweight urethane jacket protects the blast nozzle liner
-
Design:
- 1" throat entry on #3 and #4 Contractor thread AND all Fine thread options
- 1-¼" throat entry on #5, 6, 7, and 8 Contractor threads
-
Additional notes:
- Approximately half the weight of standard tungsten carbide nozzles.
- Although the up-front cost is higher than tungsten carbide, the longer life Ultra-Tuff offers same or better total cost of ownership.
-
Performance characteristics:
-
Designed with an extra-long venturi and concentrated blast pattern, the Hyper (aka XL or Saber) nozzle increases performance substantially. Additional details as follows:
-
Performance characteristics:
- Up to 30% faster coating removal and/or
- Allows greater stand-off distance (reduces need to bend over when blasting tank floors, allows greater reach, etc.)
-
Thread types & Orifice Size options:
- Contractor 2" (50mm)
- Fine 1-¼" (32mm)
- Orifice size options: 5, 6, 7, 8, & 10
-
Liner:
- SiALON silicon nitride, provides longer life and lighter weight than tungsten carbide.
-
Jacket:
- All aluminum, non-slip knurled finish
-
Design:
- 1-¼" throat entry, extended venturi, 12 inches long
-
Performance characteristics:
-
Designed with a 60% larger blast pattern, the Raptor (aka Bazooka) nozzle makes short work of your large commercial blast / sweep blast / brush blast projects. Additional details as follows:
-
Thread types:
- Contractor (2") aluminum threads
- Fine (1-¼") brass threads
-
Liner:
- Silicon nitride, offers lighter weight and longer life than tungsten carbide.
-
Jacket:
- Urethane, for improved resistance to damage
-
Design:
- 1-¼" throat entry, extended venturi
-
Thread types:
-
FREE Shipping
30 Day Money-Back Guarantee | Free Returns
90 Day Manufacturer Warranty
- Compact contractor size, highly portable with good productivity for smaller projects
- When using premium garnet media, this pot will last for up to 1 hour before you need to refill
- Capacity of 3.5 cu ft, which equates to about 500 pounds of dense media like premium GMA garnet
- Pressure Rating: 150psi
Sold as a Kit which Includes:
- Blast Pot
- Deadman Control System with 50 feet of control line and handle
- Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in order comments field.
Genuine Products - Manufactured by Schmidt® /Axxiom Manufacturing
-
Reinforced clear plastic sheeting or commonly referred to as poly, is a favorite for many sheeting applications, including short-term containment, trench lining, and for building enclosures. Details as follows:
- Made-in-USA string reinforced (aka skrim reinforced) with the filaments in a diamond pattern. (Other brands with the filaments in a square pattern are imported.)
- Fire resistant and non-fire resistant versions available
- Other sizes/thicknesses available upon request
- Priced per roll. Quantity discounts available.
-
Premium reinforced scaffold sheeting is used for projects requiring full containment and offers the following:
- White poly / polyethylene construction with blue eyelet bands
- Blue eyelet reinforcing bands have conveniently spaced holes, used to tie the sheeting to the scaffolding
- Bungees and other accessories and attachment options are available for this purpose
- Resistant to tears, water, and mildew
- Available in 6 or 12 mil thicknesses
- Available in FR or non-FR ratings
- Stocked in common sizes. Special sizes available by special order.
-
Premium poly / polyethylene shrink film is used in the following applications:
- Containment to prevent dust/debris escape on coating or construction projects
- Protection for boats or other vehicles during extended storage
- Protection for shipping equipment or other large items
-
Top choice for jobs requiring 100% containment, such as lead remediation, etc.
- Coated 420 denier nylon material (6 oz/yd) or commonly called poly
- Normally sold with FR treatment. Non-FR available by special order at a 10% savings - call for lead times.
- Standard construction includes sewn grommets positioned at 2 foot intervals along the web-reinforced seams, hems, and overlap flaps.
- The second dimension on the tarp size is always the length of the interior seams.
-
For projects where a windscreen is desireable, and full containment is not required.
- 85% Mesh poly fabric, allows slight airflow through and helps keep most dust and debris inside
- Protects from debris, wind and UV rays
- Both non-FR and FR versions available
- Gromments around perimeter and in center
-
VAVECTOR721AVAILABLE FOR RENTAL OR PURCHASE
- 235HP T4 Diesel Engine
- 3660 CFM, 28" static pressure
- Mounted on 3-axle road legal trailer
- Will convey between 15-20 tons of abrasive per hour
- Primary Filtration - Coated Bags, pulse air cleaned
- Secondary Filtration - Pleated Cartridge
- Max Vacuum hose 6"
- Empty weight 13,950lbs
- Dimensions 21' L x 8'2.5" W x 11'4" H
VAVECTOR721AVAILABLE FOR RENTAL OR PURCHASE- 235HP T4 Diesel Engine
- 3660 CFM, 28" static pressure
- Mounted on 3-axle road legal trailer
- Will convey between 15-20 tons of abrasive per hour
- Primary Filtration - Coated Bags, pulse air cleaned
- Secondary Filtration - Pleated Cartridge
- Max Vacuum hose 6"
- Empty weight 13,950lbs
- Dimensions 21' L x 8'2.5" W x 11'4" H