Search: blast hose

This general-purpose nozzle was designed for everyday use, only better – it lasts longer and offers greater ease of use!  It features the following:

Click for Buying Guide

• Performance characteristics:
  • Venturi design provides up to 40% faster production than straight bore versions.
• Thread type & Orifice Size options:
  • Contractor 2″ (50mm)
  • Fine 1-¼” (32mm)
  • Orifice size options:  3, 4, 5, 6, 7, 8
• Liner:
  • Silicon nitride, provides longer life and lighter weight than tungsten carbide.
• Jacket:
  • All-polyurethane – reduces ‘jams’ in metal nozzle holders
  • Shock absorbent, lightweight urethane jacket protects the blast nozzle liner
• Design:
  • 1″ throat entry on #3 and #4 Contractor thread AND all Fine thread options
  • 1-¼” throat entry on #5, 6, 7, and 8 Contractor threads
• Additional notes:
  • Approximately half the weight of standard tungsten carbide nozzles.
  • Although the up-front cost is higher than tungsten carbide, the longer life Ultra-Tuff offers same or better total cost of ownership.

The BAABS deadman assembly works on all sizes of blast hose.  To facilitate the various hose diameters, a hose adapter set is required.  Each adapter set includes 2 grippers (2 sets are used per BAABS) and is offered in the following sizes:

• M1, for HE1 nozzle holder (1″ whip OR 3/4″ 4-ply hose)
• M2, for HE2 nozzle holder (1-1/4″ whip OR 1″ 4-ply hose)
• M3, for HE3 nozzle holder (1-1/2″ whip OR 1-1/4″ 4-ply hose)
• M4, for HE4 nozzle holder (1-1/2″ 4-ply hose)

NOTE – set sizes M2, M3, and M4 are INCLUDED with each BAABS system purchase.  Size M1 available at additional cost.

• Used for blasting pipe internals with 3″-12″ ID
• Blasts in a 360 degree pattern
• Units come standard with Tungsten Carbide deflector tip
• Select the unit that will best match your Air Supply:
  • IPC4000, 1/2″ Throat Nozzle: 250 cfm
  • IPC4500, 5/8″ Throat Nozzle: 400 cfm
• Order Transport Carriages separately as follows:
  • IPC4100, Collar and Button, for 3″-5″ ID
  • IPC4200, Scissor, for 5″-12″ ID
  • Requires BSP (not NPT) threaded coupling to attached to standard blast hose coupling, part number HFSTC1BSP, available here or under the repair parts tab below.
• Successful Internal Pipe Projects require some specialist knowledge – contact our team for assistance
• Note:  This product is similar to the Clemco Hollo-Blast

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Blasting rate up to 20 ft² per hour.  Due to this low production rate, this unit is intended for specialty applications, such as spot-work in dust-sensitive areas.
• Utilizes the TeraValve XL abrasive metering valve
• Compressed Air Requirement is only 185 cfm
• Has wheels and fork pockets for easy portability by hand, or by forklift.
• 100% compressed air powered – no electricity required
• Various workheads are available for flat surfaces, inside corners, outside corners, etc. – enquire for details.
• Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

AVAILABLE FOR RENTAL OR PURCHASE

• The Western Technology 3475 is the #1 Nozzle Mounted Blast Light preferred by Blasting Contractors
• Powerful 1,325 lumen LED light array
• Can be hose mounted (with stanchion) or hand-held
• Multiple configurations available
  • Light with 10′ cable (unfitted)
  • Light with 50-300′ cable, fitted with one of the following
    • 12-28v Battery Alligator Clips
    • 110v Transformer and standard 110v plug
    • Mini 3116 twist-lock plugs (use with the optional Western Technology 4-outlet transformer)
• Genuine Products – Manufactured by Western Technology

Note:  The Western Technology blast nozzle light is designed to last and is very durable.  Accidents or abuse may necessitate repairs however, and if a light needs repair, it must be conducted at BlastOne.  Cost to estimate repair is ½ Hour labor (refundable with completion of repair).  When a light is repairable, ballpark cost would be $750 due to the cost of the component assemblies.  Contact Customer Service at 1-800-999-1881 to coordinate inspection/repair of your lights.

AVAILABLE FOR RENTAL OR PURCHASE 

The “Twin line Deadman Control Hose” (SKU: AHRMS4055) offers a safe, heavy-duty solution for pneumatic deadman controls. Bonded and color-coded for enhanced safety, it is available for rental or purchase.

• Bonded, heavy duty, twin rubber hose, color coded for safety
• Used to supply air to the deadman handle which is used to signal a “blast” return charge of air to the blast pot control valves
• Always replace the hose at the first sign of wear, this is a safety deadman control item.
• Fitted standard with male-female threaded connectors
• 1/4″ (6 mm) connectors on ‘supply’ red hose
• 1/8″ (3 mm) connectors on ‘return’ green hose
• 55 ft length
• Please Request Rental Pricing

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Compact contractor size, highly portable with good productivity for smaller projects
• When using premium garnet media, this pot will last for up to 1 hour before you need to refill
• Capacity of 3.5 cu ft, which equates to about 500 pounds of dense media like premium GMA garnet
• Pressure Rating: 150psi

Sold as a Kit which Includes:

• Blast Pot
• Deadman Control System with 50 feet of control line and handle
• Choice of inlet fitting in either 4-claw or Spud type.  Spud will be supplied unless otherwise noted in order comments field.

Genuine Products – Manufactured by Schmidt® /Axxiom Manufacturing

Nozzle holder for blast hose 

• Couples the blast nozzle to the blast hose
• Choose your blast nozzle thread type;
  • 3/4″ Medium (aka Mitey-Mite) Thread
  • 1-1/4″ Industrial Fine Thread
  • 2″ Coarse/Contractor Thread *Contractor Favorite*
• Available in Nylon, Brass or Aluminum
• Click the Documents tab below to view full selection
• Industry Commonly Referred to As: HE1, HE-1, HE2, HE-2, HE3, HE-3, NHP1, NHP2, NHP3, NH1, NH-1, NH2, NH-2, NH3, NH-3

Convert your Pneumatic Blast Pots to Electric Deadman Systems seamlessly with the Pneumatic to Electric Deadman Blast Pot Conversion Kit (SKU: P-DMECK). Ideal for setups with over 100ft of blast hose. Kit includes connector box, battery cable, and more.

• Pneumatic to Electric Deadman Blast Pot Conversion Kit
• Used to convert Pneumatic Blast Pots over to Electric Deadman Systems
• Electric Deadman should be used on any set ups running over 100ft of blast hose
• Sold as a Conversion Kits including;
  • Connector Box
  • 16 feet battery cable with alligator clips
  • Response electric remote control handle
  • 55 feet  deadman cable
  • TwistLok plug connector
• Energy consumption rate of 8 watts per control valve
• Assembled by Qualified BlastOne Technicians

• 2-claw Blast Hose QC Quick couplings
• Available in Brass, Aluminum, Steel and Nylon
• 2 types available – Standard and MegaMax.
  • NOTE:  MegaMax and Standard couplings require an adapter to fit together
• MegaMax couplings are Full-Flow, designed to remove the air restrictions caused by standard couplings and increases the PSI available to the nozzle.  The increased PSI is mostly beneficial when doing high-production blasting using 1.5″ or 2″ ID Blast Hoses.
• These are unthreaded couplings designed for blast hoses only. Threaded QC fittings are used on the metering valve outlet, and can be found HERE.
• Industry Size Commonly Referred to as Q1, Q-1, Q2, Q-2, Q3, Q-3, Q4, Q-4, Q6, Q-6

• Must be installed in all blast hose couplings for safety
• Stops the blast hose coupling rotating and disconnecting
• HF-CLP1 is the thin type lock pin (Pack of 25)
• HF-CLP2 is the thick type lock pin (Pack of 25)
• HF-CLP3 is the nylon coupling spring type lock pin (Pack of 10)
• HF-CLP4 is the multi-fit spring type lock pin (Pack of 25)

• Compatible with a wide range of blast pots
• Digital display of actual blasting time for individual blast outlets
• Allows you to determine productivity, production rates, assisting project costings, job estimates and scheduling maintenance for common wear items
• System available to run off pneumatic and electric deadman controls
• Triggered instantly by the deadman signal, so you get actual blasting hours
• Options available for single and multiple outlets.

The Tigerflex Vacuum Hose UF1, manufactured by Kuriyama, offers superior abrasion resistance, making it an ideal choice for moving large quantities of abrasive blast media. Available in multiple sizes and featuring anti-static properties, a counter-clockwise spiral helix, and crush-resistant properties, this heavy-duty vacuum hose delivers optimal performance, regardless of the type of abrasive blast media used. 

AVAILABLE FOR RENTAL OR PURCHASE

• Has anti-static properties to reduce static shock to the operators
• Counter-clockwise spiral helix
• Special rubber compounds ensure high levels of abrasion resistance
• UF1 Vacuum hose is suitable for recovering and moving large quantities of abrasive blast media
• Available in multiple sizes
• Genuine Product – manufactured by Kuriyama

FREE Shipping

30 Day Money-Back Guarantee|Free Returns

90 Day Manufacturer Warranty

• Most common contractor size, combining portability with productivity
• When using premium garnet media, this pot will blast for around 1.5 hours before you need to refill
• Capacity of 6.5 cu ft, which equates to 950lbs of a dense media like premium GMA Garnet
• Pressure Rating: 150psi

Sold as a Kit which Includes:

• Blast Pot Deadman Control System with 50 feet of control line and handle
• Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in Order Comments field

BLAST HOSE SOLD SEPARATELY

Genuine Products – Manufactured by Schmidt® /Axxiom Manufacturing

For rental or purchase

This kit includes all parts needed to change from blasting to blow-off at the flip of a switch at the deadman. Eliminates need for a separate air-hose or trekking back to the pot to shut off the abrasive.

This version is for pots with an existing Thompson 2 valve and pneumatic controls.

• #1 Fastest Suction Blast System Available
• Uses an Abrasive Pick-Up Tube and flexible Hose to mix abrasive with the airstream
• To set up, simply slide the pick up tube into your bag of abrasive, connect your compressed air and pull the trigger
• Comes with a fixed orifice ¼’ Airjet and ½’ Tungsten Carbide nozzle
• Can be used with any media, right out of the bag
• Ideal for where air supply is limited or for small jobs where setting up conventional pressure blast machine is a nuisance
• Uses between 40-120 cfm of air – the more you have, the faster you blast.
• Sold as a Kit including the gun, nozzle and pick up tubes
• Also referred to as a bag blaster
• Genuine Product – Manufactured by Clemco

Blast hoses must be cut square before attaching a fitting to them. The use of hose cutters like these are recommended as using a saw or other process will not allow the fitting to seat properly, causing premature wear.

Replacement blades available.

Two sizes available:

HFKCT100 for hoses up to 2 3/8″ (60mm) OD.

HFKCT150 for hoses up to 3″ (75mm) OD.

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Unique!  Dual Outlet for 2 operators, in a short configuration for easy loading.
• Only 46 inches tall!  Shorter than a standard 6.5 pot.
• Capacity of 11 cu ft, which equates to 1600lbs of a dense media like premium GMA Garnet
• Pressure Rating: 150psi
• TeraValve pressure-hold metering valves

Sold as a Kit which Includes:

• Blast Pot
• Pneumatic Deadman Control System comes with 2 sets of 50 feet of control line and handle
• Choice of inlet fitting in either 4-claw or Spud type. Spud will be supplied unless otherwise noted in Order Comments field.

BLAST HOSE sold separately

Genuine Product – Manufactured by Schmidt® /Axxiom Manufacturing

Standard Tungsten Carbide (aka TVP) blast nozzles are widely used and are a lower-cost, basic general-purpose nozzle with the following characteristics:

Click for Buying Guide

• Performance characteristics:
  • Venturi design offers up to 40% greater production than straight bore.
• Thread Types:
  • 1-1/4″ NPSM (32mm) brass fine threads
  • 2″ (50mm) aluminum contractor threads
  • Flange type (unthreaded, and attaches to a blast hose with a standard blast hose quick coupling instead of a nozzle holder)
• Orifice Sizes:  
  • Contractor & Fine:  3, 4, 5, 6, 7, 8, 10, 12
  • Flanged:  6, 7, 8, 10, 12
• Liner: 
  • Tungsten Carbide, provides longer life than disposable alternatives for industrial blasting projects
• Jacket:  
  • Contractor and Fine thread versions have poly jacket
  • Flanged type is an all-aluminum jacket
• Design:
  • 1″ (25mm) throat entry for #3 and #4 sizes
  • 1 1/4″ (32mm) throat entry, for all other sizes
• Additional notes:
  • Lowest up-front cost of any industrial blast nozzle.
  • Higher weight and shorter lifespan than premium silicon nitride versions.
  • Lower total cost of ownership, higher performance, and/or improved ease-of-use may be achieved with one of the premium nozzle options.  See You May Also Like below.

Blast N’ Vac Workhead Complete Kits are great for flat surfaces, but custom units are available. Freatures include the following: 

• Standard / BNV-2.5
• Standard / BNV-3
• Large with wheels / BNV-4
• Standard / BNV-5
• Super Five™
  • Largest workhead available
• Standard / BNV-6
• Right Angle
  • Designed to get into smaller areas 

The MiniBRS G2 Trigger Workheads are easier to handle than other versions for your vacuum blasting projects. Features include the following: 

• Longer lasting brushes
• More containment while blasting
• Improved vacuum flow
• Easier to slide head over surfaces while blasting 
• Various Brush options available, including:
  • Flat Surface
  • Inside Corner
  • Outside Corner
• Available in either Electric or Pneumatic 

• Suits MegaFlow Bull Air Hose (BHBULL50/75)
• Ground Joint Spud Hose Fittings made of Plated Iron – Connects Air hose to Equipment
• Recommended by BlastOne as the preferred Bull hose fitting – safer than 4-claw
• Sold Individually
• Genuine Parts – Manufactured by Dixon

The Water Induction Nozzle (aka WIN nozzle) is an economical way to enter the wet blasting market.  Commonly used in smaller projects, it offers excellent water flow control.  Additional Details:

• Use with standard dry blasting equipment.  No modifications required.
• Connects to standard garden hose, or you can use a tank with a standard 12v pump if you need to add rust inhibitor to the water.
• Typically stocked with tungsten carbide liner and contractor threads, it is also available with silicon nitride liner and/or fine threads.  Contact us for details.

Effective solution for blasting in hard-to-reach areas such as:

• Inside of bolt holes
• Inside of close-fitting steel channels
• Difficult access structural steel, such as bridge supports, etc.

Our Tite Space Invader kit:

• Offers standard extension lengths from 10 to 60 inches, with other options available by special order.
• Can be used with most abrasives
• Attaches to blast hoses with standard 2-prong couplings (not nozzle holders)
• Nozzle is NOT included and shown for illustration purposes only.  Requires junior size 3/8″ NPT threaded nozzles.  Choose the correct one for your application from our Tite-Space nozzle selection here.
• Female version requires only ¾” clearance.
• Male version requires only 1″ clearance.

• PiHab is a flexible abrasive blasting enclosure designed for easily adapting to pipes and beams etc….or any other structure that can be wrapped.
• Creates a encapsulation anywhere on a jobsite, especially in a working pipe area
• Kit comes with 5 PiHab bags, Viewing Window, Vaccum set up, Air input set up
• Genuine Parts – Manufactured by Pinovo in Norway
• Minimal Availability in USA – Request a quote/express interest

Many time-saving Vac Hose Fittings are available.  This group includes:

• Vac Hose Wyes, join 2 smaller hoses to 1 larger hose
• Vac Hose Splitters, join 3 or 4 smaller hoses to 1 larger hose
• Easy to install and remove for hassle-free maintenance
• Made from durable carbon steel

Contact us for additional sizes / options

• Suits MegaFlow Bull Air Hose 1-1/2″ and 2″ (BHBULL38/50)
• 4-Claw Crowsfoot Bull Hose Coupling
• Supplied with FMCFG gasket fitted
• Always use HFCLP2 lock pins – order separately
• Rated for 150 psi
• Sold Individually

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Manufacturer Warranty

• 10 cu ft Schmidt® Blast pot
• Excellent for a blastroom application with 1-2 blasters
• Single outlet Thompson® Valve II abrasive metering valve, Dual available
• Abrasive capacity
  • Garnet 1500 lbs
  • Steel Grit 2450 lbs
• Comes with pneumatic deadman handle and 55ft of control hose, Electric available

Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing to BlastOne specifications

The “Blast Nozzle Pressure Test Kit” (SKU: BAHNGKit) by BlastOne ensures quick and accurate nozzle pressure testing. Comes complete with a stainless steel pressure gauge, needles, and a protective leather-bound case.

• For testing air pressure at the nozzle
• Uses hyperdermic needles which insert into the blast hose to take the nozzle pressure
• Insert about 6-10ft behind blaster for most accurate reading
• Test kit includes:
  • Liquid filled stainless steel pressure gage with dual pressure & efficiency scale
  • Four needles and instructions
  • Protective leather bound case
• Sold as a Kit
• MPN 2010-014-03

Note – there is no calibration certificate process available for this item.

• Suits MegaFlow Bull Air Hose (BHBULL50/75)
• Ground Joint Spud Bull Hose Coupling
• Rugged plated steel construction
• Recommended by BlastOne as the preferred Bull hose fitting – safer than 4-claw
• Gasket-less, low maintenance design
• Sold Individually
• Genuine Parts – manufactured by Dixon

• 20 cu ft Blast pot
• Excellent for a blastroom application with 2 blasters
• Dual outlet Thompson Valve II abrasive metering valves
• Abrasive capacity
  • Garnet 2950 lbs
  • Steel Grit 4900 lbs
• Comes with two pneumatic deadman handles and two lengths of control hose (Electric Available)
• Genuine Products – Manufactured by Schmidt to BlastOne specifications

AVAILABLE FOR RENTAL OR PURCHASE

• MegaFlow heavy duty air supply bull hose
• Fitted with your choice of industrial fittings
• Fitted by Trained and Certified BlastOne Technicians
• Rated to 300psi with 3:1 safety factor
• Always use with safety whipchecks

GRACO® SPECIAL PURCHASE – ECOQUIP FINAL CLEARANCE!

These hoses and nozzles are top quality new condition, and work on all abrasive blasting equipment (not just EcoQuip).

These special-purchase products include the following:

• EcoQuip “Replacement” blast hose assemblies, which include coupling / nozzle holder, control line, and a Schmidt® Response deadman handle, in both pneumatic and electric.
• EcoQuip “Extension” blast hose assemblies, which include couplings and control line, in both pneumatic and electric.
• EcoQuip “Bulk Hose”, 50′ sections of blast hose, without any accessories
• Graco blast nozzles in the following types:
  • Standard (contractor thread)
  • Hyper (contractor thread)
  • SST (medium thread)
  • Double Venturi (contractor thread)

Note:  The hose assemblies with electric control cable come in both mini and standard connections – see the product descriptions.

This special close-out purchase is limited to stock on hand and will be available on a first-come, first-served basis until they are gone. Pricing shown is the Graco® MSRP.  (See our promotion page for current special offers.)

• Designed for use with the rotorblast and cone blasters when ID blasting
• Semi-automatically feeds the blast hose at a consistent rate through the pipe being blasted
• Ensures a consistent blast pattern vs manual handling of the hose

• BABL3070 / BABL3070L – an economical Blast Light option
• Typically mounted directly behind the blast nozzle to give the blasting operator light where he is blasting.
• Comes with 10ft bare cable, order a Electrical connector separately
• Low voltage 12 volt operation for operator safety
• Uses 20W Halogen light bulb

The Fitted Chicago Air Supply Hoses are heavy-duty, 300psi rated hoses, designed with high-quality EPDM synthetic rubber for optimum durability, ideal for powering machinery, tools, and air motors. They come prefitted with Chicago-style couplings, ensuring a secure, easy-to-use solution for your air supply needs, with other sizes available upon enquiry.

• 30 Day Money Back Guarantee | Free Returns
• Heavy duty rubber air supply hose – fitted
• High Quality, EPDM Synthetic rubber cover and tube
• 300psi rated
• Ideal for Machinery, tools and air motors
• Not Rated for Breathing air
• Prefitted with Chicago-style couplings

Other sizes available – enquire.

• MegaFlow heavy duty air supply bull hose
• Used to supply the large volume of air required for sandblasting
• Made from high-quality rubber compounds that are oil resistant
• Tough, UV resistant outer cover resists breakdown from sunlight
• Nylon braiding to make it more flexible and easier to man-handle
• Rated to 300psi with 3:1 safety factor
• Fitted Bull Air Hoses also available

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• Smallest production style pot available
• The 0.9 cuft capacity will hold 140 lbs of Garnet
• Ideal for in-plant or onsite touch up work
• Comes with Schmidt TeraValve™ Metering Valve
• Unit includes 25′ blast hose with trigger deadman, 1/8″ nozzle and twinline
• Comes with moisture trap
• 3/4″ Piping

Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

For rental or purchase

• Suits Standard Aluminum and Brass Blast Hose Couplings
• High Pressure Version which lasts longer and withstands higher pressures
• Recommended when blasting with pressures over 120psi
• Single Lipped High Pressure Urethane
• 1-¼ (32mm) Bore Size
• Sold as a pack of 10

The RPB Breathing Air Hose, available for rent or purchase, is designed to ensure safety and compliance in high-pressure settings. Perfectly suited for RPB Nova 2000 and Nova 3 Blast Helmet setups, this certified breathing air hose features a non-toxic liner, a durable outer jacket, and is fitted with approved quick connect fittings, compliant with all international and NIOSH standards. Rated for up to 350 psi working pressure, this 3/8″ (10mm) ID bore hose offers reliable and safe performance for all your breathing air needs.

AVAILABLE FOR RENTAL OR PURCHASE

• Suits RPB Nova 2000 and Nova 3 Blast Helmet Set ups
• NIOSH requires that this breathing air hose is used with the Nova Helmets
• Certified Breathing Air Hose with non-toxic liner
• Complies with all international and NIOSH Standards
• 3/8″ (10 mm) ID bore.
• Fitted with approved breathing airline quick connect fittings.
• Rated up to 350 psi working pressure.
• Genuine Products – Manufactured by RPB Safety

• 2″ Diameter Pyrex Blast Lens
• Suits Brite-Blast Light BABL3070L
• Comes with O-Ring
• Use with BABL3001 retaining clip
• Sold Individually.

• Dual Wheeled Trailer Mounted Blasting Package Including
  • BMS6.5 blast machine with Thompson® Valve outlet
  • 400 cfm AirPrep™ Air Dryer
  • 375 cfm 150 psi diesel air compressor
  • Breathing air filter
  • Carbon monoxide alarm
  • Tool box
  • Hose rack
  • Room for 1 skid of abrasive

Updated and enhanced! BlastOne has refreshed its highly successful MistBlaster® and has released the latest generation with even more capability!

What HAS NOT changed:

• Industry-Leading Flexibility. 
  • The MistBlaster® is a true dry blaster with the added capability of being the best wet blaster on the market. It is not a limited-purpose dustless / slurry blaster that will sit around gathering dust most days.
• Water and Abrasive flow is separately adjustable. Maximizes production while keeping cleanup to a minimum.
• Reliable design.  Uses the latest generation TeraValve® metering valve on the popular 6.5CF pot chassis.
• Abrasive choice.  Will work with most abrasives in dry mode. In wet mode, garnet or crushed glass are recommended.

What HAS changed:

• Enhanced functionality. 4 functions are built into the control panel (Dry Blast, Wet Blast, Wash Down, and now Blow Down)
• Controls flexibility.  The dual deadman control system is now set up to operate either electrically or pneumatically.
• High-Flow piping.  Air pressure regulator has been deleted and piping has been upgraded to increase nozzle pressure.

All 6.5 c.f. MistBlasters include the following as standard:

• Single outlet TeraValve® abrasive metering valve
• Dual electric / pneumatic controls, including deadman handle and control line
• Industrial-strength Schmidt® VBS II Muffler

Configuration Options:

• Wheel version – Stand-alone unit, portable configuration
• Skid version – Stand-alone unit, mounted on a steel skid.
• Combo Skid versions, save setup time and storage space. Available in the following configurations:
  • Combo Skid 400 cfm Dryer Options as follows: 
    • Deliquescent type (4-season / highest efficiency)
    • Aftercooler Squat type (3-season / less effective in cooler temperatures)
    • No Dryer
    • Note: Unlike dedicated slurry-type blasters, the MistBlaster is designed around a standard dry vessel.  A stand-alone air dryer is required in order to realize a full return on your investment.
  • Combo Skid Mounting Options as follows: 
    • Steel Skid
    • Steel Skid with Frame
  • Combo Skid Breathing Air Packages as follows: 
    • With Breathing Air Station (breathing air filter, carbon monoxide alarm, and 50′ breathing air line)
    • Without Breathing Air Station
  • Note:  All Combo Skid configurations include an Air Manifold with spare air ports and a 50-gallon tank.
• Retrofit version:  Save money by retrofitting your existing 6.5 pot (must be structurally sound).  Available in wheel or skid configurations and includes all standard MistBlaster features.

Available for Purchase or Rental. Ask about a demo!

Additional details shown under the description tab.

CopperVac is the heavy-duty vacuum hose for highly abrasive media recovery. Featuring a polyurethane liner, rigid PVC spiral reinforcement, and copper wire for static dissipation, it’s perfect for sand and gravel vacuuming as well as any abrasive blasting media. Available in a range of sizes, experience the power of CopperVac now!

• Heavy duty, extra thick abrasion-resistant liner
• Rigid PVC spiral (counter-clockwise helix)
• Flexible, even in cold temperatures
• Copper wire, for static dissipation

• Premium Deadman Technology
• Comfortable to hold – increases operator compliance
• Available as Electric or Pneumatic in 2 configurations each:
  • 2-position (on/off) version 
  • 3-position version with the following:
    • Position 1 – Air Off / Abrasive Off
    • Position 2 – Air On / Abrasive Off (for blowing off)
    • Position 3 – Air On / Abrasive On (for blasting)
• This handle can be used with any blast control setup, but comes standard with each new BAABS deadman system purchase – see here for the main BAABS page.
• Genuine Products – Manufactured by Schmidt / Axxiom Manufacturing

Discover the convenience and performance of the “Twin-line Control Hose (3/16″) – Coupled” (SKU: AHRMS4050C). Expertly crafted to streamline your blasting operations:

• Directly pre-coupled with female swivel joiners for effortless setup
• Specific 3/16″ I.D., stretching 50′ in length, tailored for Clemco equipment compatibility
• Designed to bridge the deadman control trigger with the valves on your blast pot, ensuring a tight, efficient connection
• Features a distinct Yel/Yel coloring with a Black stripe for easy identification
• Experience superior coupling, specifically for Clemco equipment users

Choose the Twin-line Control Hose for reliability, ease of use, and optimal blast performance.

• Suits Graco King and Xtreme Airless Sprayers
• Xtreme Pump Suction hose only
• 1″ (25 mm) internal diameter
• 6′ (1.8 m) suction hose with male pipe thread on one end for the suction tube (use GR 197682 – not included)
• Quick Knockoff coupling for connection to the pump lower
• Does not include the bent pick up tube or connectors
• Genuine Parts – Manufactured by Graco

• Suits Mega-Max Aluminum and Brass Blast Hose Couplings
• Single Lipped MRL Rubber
• 1-¾ (45mm) Bore Size
• Have Large Bore for maximum efficiency
• Sold as a pack of 10

• Conventional bleeder-type deadman control handle
• 1/4″ (6mm) (supply) x 1/8″ (3mm) (return) threaded connectors
• Large lever design
• Use only with equipment designed for bleeder-style handles – DO NOT use with Combo or Thompson Valves

Ensure the smooth operation of your Pneumatic Response Deadman Handle with the “Response Deadman Service Kit” (SKU: DM226300299). This complete kit features genuine parts by Schmidt/Axxiom Manufacturing for efficient in-field repairs.

• Suits Pneumatic Response Deadman Handle
• Complete Service Kit to enable in-field repair of Deadman Handle
• Sold as a Kit including;
  • Shuttle Valve
  • Spring
  • Replacement Plug
• Genuine Parts – Manufactured by Schmidt / Axxiom  Manufacturing

• 2-claw threaded coupling for metering valve outlet, to enable connection of blast hose
• Supplied with HFGMRLP coupling gasket fitted
• For Aluminum, Brass, and Steel,  use HFCLP1 thin safety lock pins – purchase separately
• Nylon is supplied with HFGPCG gasket fitted and contains an integral springlock pin
• 2 types available – Standard and MegaMax.
  • Note: MegaMax and Standard couplings require an adapter to fit together.  
• MegaMax couplings are Full-Flow, designed to remove the air restrictions caused by standard couplings, and increases the PSI available to the nozzle.  The increased PSI is mostly beneficial when doing high-production blasting using 1.5″ or 2″ ID Blast Hoses.
• These are threaded couplings designed for metering valve outlets only.  Unthreaded QC couplings are used on blast hoses, and can be found HERE.
• Note:  1 1/4″ threaded couplings can also be used as Quick-couple type nozzle holders for fine thread nozzles.
• Industry Size Commonly Referred to as SB1, SB-1, SB2, SB-2

Our latest generation Mega MistBlaster offers both wet and dry blasting for the ultimate in flexibility!  It reduces costs and time when doing large projects and offers the following:

• Versatility.  4 functions available at the flip of a switch:
  • MistBlasting / Wet (slurry) Blasting
  • Traditional Dry Blasting
  • Wash-down mode
  • Blow-off mode
  • Each outlet is independently controlled, giving even greater versatility.
• Capability.  With its 4 outlets, this workhorse can power up to 4 operators OR a VertiDrive robotic blaster and manual blasting simultaneously.
• Huge capacity – As typically configured with 160 cubic feet (aka 8 Ton), this bulk pot holds half a truckload of garnet.
• Mount Options as follows:
  • Highway Trailer
  • Skid Mount
  • Shipping Legs (for mounting on your own equipment)
• Available Cost Saving Option – We can convert your existing Schmidt® bulk pot with our MistBlaster retrofit package. Available as a Limited version (without metering / air valves, for new pots) or as a Full version (with all valves, for used pots).

More options and features shown under the description tab.

Available for Purchase or Rental. Ask about a demo!

Note:  Designed for use with a 1600 CFM dryer, available here.

• The safest deadman on the market – mechanically prevents inadvertent activation
• Redundant spring-loaded safety latch assures base stays wrapped around blast hose
• The BAABS system is built around the G3 Trigger Deadman handle
• Modular configurations
• Unrivaled comfort – ergonomic grip design allows for increased control
• Thrust pad and side grip can be quickly configured for left- or right-handed operation
• Handles and grips can be adjusted to accommodate varying arm lengths
• Can be easily retrofitted over most blast hoses
• Genuine Schmidt® part manufactured in the USA

• For attaching couplers and nozzle holders to blast hoses
• Used in conjunction with a small amount of silicon to install couplings
• Domehead or Countersunk
• SEE Screw Selection CHART in Additional Information below for proper sizing
• Sold in packs of 200

• Will transform your blast pot into a pressure hold system
• Retrofit Kit includes:
  • Thompson® Valve Series II Metering Valve
  • Full pusherline kit
  • Automatic air valve and all interconnecting hoses
  • Control line strainer and control valve
  • Response deadman handle and Twinline
  • Does not include muffler or pressure relief valve pictured
• Genuine Parts – Manufactured by Schmidt® / Axxiom Manufacturing

• 30 Day Money Back Guarantee  |  Free Returns
• Industry standard coupling for use with air supply hose
• Rugged steel construction
• Quarter-turn quick action connector
• Supplied with 3/4″ I.D. bore gaskets fitted
• Use HF CLP-1 or HF CLP-2 Lock Pin – (not included)
• Available with hose tail, male threads, or female threads
• Sold individually

• Vacuum Powered Steel Grit Recycler designed for onsite clean up and recycling
• Capacity up to 50 tons per hour of steel grit
• Skid Mounted, can be used in portable and fixed installations
• Integrated vacuum recovery for clean up and automatic abrasive cleaning tower
• Recycled abrasive is deposited directly back into your abrasive storage hopper
• (2) High-capacity 6” vacuum inlets for entry of recovered abrasive with 8” connection ports to vacuums
• Adjustable magnetic drum separator for fine tuning of abrasive size

IN-STOCK READY TO SHIP

• Suits BABL3475 LED Blast Light
• Blast Light holder (Stanchion) for mounting onto your blast hose
• Install the light directly behind you blast nozzle, to give you blasters proper visibility – no more braille blasting.
• Comes with Hose Clamp
• Sold Individually
• Genuine Part – Manufactured by Western Technology

AVAILABLE FOR RENTAL OR PURCHASE

• LED explosion proof mountable area light
• Kick-it-tough design to outlast brutal onsite treatment from contractors
• Comes with explosion proof cable
• Approved for: Class 1, Div 1 & 2; Groups C & D
• Suitable for wet location use
• LEDs color: ~6000K, CRI >70
• Weight: 10 lbs (light head only)
• Genuine Parts – Manufactured by Western Technology

MOBILE DUST COLLECTOR, AIR SCRUBBERS & PORTABLE DUST EXTRACTORS

• Ready availability all over the US
• Diesel powered
• Trailer mounted or skid mounted
• Industry leading design
• All sizes available
• Read our Dust Collector Buying Guide
• Portable dust extractor for site work
• Onsite dust collectors and onsite dust ventilation
• Industrial portable dust collectors

Thread adapters are a convenient way to allow nozzles of one thread type to be used in nozzle holders of a different type.  

Boron Carbide is the longest life version, but not available in all configurations.  Polyurethane, steel, aluminum, etc. are also available and are lower in cost.

• Available configurations:
  • Contractor (2″ / 50mm) Thread Nozzle Holders to:
    • ¾” (20mm) Medium Thread nozzles
    • 1-¼” (32mm) Fine Thread nozzles
    • Flange nozzles
  • Fine (1-¼” / 32mm) Thread Nozzle Holders to:
    • ¾” (20mm) Medium Thread nozzles
    • 2″ / 50mm Contractor thread nozzles.  This is a BlastOne Exclusive!

When Axxiom released the Thompson 2 valve, the benefits of Pressure-Hold technology were instantly upgraded by improved user experience over the Thompson I valve.  Details as follows:

• Improved servicability:
  • Body and cylinder are now 2 parts, providing easier removal of sleeve and plunger.
• Additional Seal protection:
  • Has 3 separate seals (versus the original 1), reducing dust migration and improving durability.
• Multiple Sleeve choices:
  • In addition to the original Tungsten Carbide and Urethane full-flow options, Axxiom has released additional options that help prevent over-consumption in various applications.
• Virtual Position Indicator:
  • Simplifies setting of the media flow rate.
• Cleanout:
  • Full 1″ port directly under the inlet allows cleanout without removing the valve.
• Size info:
  • Standard 1-¼” (32 mm) inlet thread
  • 4 choices of MNPT piping for pusher-line connection
    • 1″, 1-¼”, 1-½”, and 2″
• Options:  Make servicing the valve even more convenient with one of the following:
  • Union-End Ball Valve – The UEBV allows removal of valve without emptying the pot.
  • Tri-Clover Quick Connect – allows removal of valve without tools.
  • Combination UEBV and Tri-Clover – combines the benefits of both options at a reduced cost.

Meter your abrasive efficiently and conveniently with the genuine Axxiom Thompson II valve!

Adapts MegaMax coupled hoses to standard QC coupled hose.  

• Hi-flow Blast Pot Pusherline Kit
• Used on Blast Pots between the air control valves and the metering valve
• Sold as a complete assembly Including
  • Pusherline Air Hose
  • 1-¼” ball valve
  • 1-¼” Nut and tails with bolt style clamps for in-field installation
  • Does not include Metering Valve

Sized between the Tite Space and the full size nozzles, the ATA series of angle nozzles come standard with ¾” Medium Threads. They are excellent for applications requiring the operator to operate in small areas, especially when paired with a small bore whip-hose. Basic specs are:

• 3/4″ (20mm) Medium male thread (other options available by special order).  Can be used in standard Fine or Coarse nozzle holders by use of a thread adapter available here.
• 1/2″ (13mm) throat entry
• 45° forward, 90° right angle, and 135° reverse blast pattern options available
• Some sizes are available in Double, Triple or Quad orifices
  • Note:  Using nozzles with multiple orifices will multiply the compressed air CFM requirement accordingly
• Tungsten carbide liner.  Extended life liners for large projects available by special order.
• Short 2-1/8″ length

Contact us for additional options available by special order.

• Water ring creates a dust suppression “curtain” around blast pattern.
• Basic wet blasting option.
• Attach to a standard garden hose, has a flow regulator to give some control over water volume
• Does use a large amount of water. For larger projects, consider using a MistBlaster to reduce cleanup.
• Does not include the nozzle. Will fit the Ultra nozzle, the TVP tungsten carbide nozzle, but does not fit the Hyper nozzle.

FOR RENTAL OR PURCHASE

• FREE Shipping
• 30 Day Money-Back Guarantee | Free Returns
• The IBIX 6 Blaster is a portable abrasive blasting system.
• Very light – Empty Weight is only 27lbs
• Ideal for touch-up and maintenance work.
• It’s portability makes blasting in difficult access areas possible.
• Sold as a Kit with a 25′ hose and application gun 1/8″ nozzle.
• Genuine Parts – Manufactured by IBIX

• Suits Combo Valve Blast Machines
• Blow down hose is used as part of the blast pot exhaust valve
• When the deadman is triggered, the combo valve pinches off the blow down hose, and lets the pot pressurize
• Includes 3′ of high-quality 3/4″ 4-ply blast hose
• Comes fitted with a 1-1/4″ threaded blast hose fitting to allow attachment to the blast pot

The “Standard Claw and Bore Metal Coupling Gaskets MRL” (SKU: HFGMRLP) is a durable replacement gasket, designed for standard metallic claw couplings. Sold in packs of 10, suitable for systems blasting over 80psi.

• 30 Day Money Back Guarantee | Free Returns
• Suits Standard Aluminum and Brass Blast Hose Couplings
• Single Lipped MRL Rubber
• 1-¼ (32mm) Bore Size
• Work great with blasting systems that blast at pressure over 80psi
• Sold as a pack of 10

High Pressure Version is available which lasts longer and withstands higher pressures – HFGMRHP

• Suits 1 1/4″ blast hose
• Durable steel jacket 

• FREE Shipping
• 30 Day Money-Back Guarantee | Free Returns
• IBIX Blaster is made from a 100% aluminum lightweight body
• One of the most versatile and portable blasting units available
• Weight Empty: 99 lbs.
• Will run effectively off a 3/4″ air supply line
• Capacity to hold 1 small bag of garnet – about 60 lbs.
• Comes with 25ft of blast hose and blast gun
• Genuine Parts – Manufactured by IBIX

• Very long lasting – the LEDs will last 20x the life of a halogen globe
• Boasts a dual lens system to keep dust out of the LED’s
• Light, 20oz cast aluminum body
• 295 lumens light output
• Voltage range – 12-24 v DC
• Can be repaired on site, reduces down-time
• Hose mount foot is easily replaceable
• Genuine Part – Manufactured by Western Technology

• Suits AHR general purpose air hose
• Two piece fitting, hose tail to swivel nut female thread
• Various clamping options – double bolt clamp or bandit clamp
• Sold individually

• Combines inlet and exhaust valve functions
• Full-ported, 1 -¼ (32 mm) thread, inlet side
• Pneumatic operation requires 60psi to close exhaust valve
• Rugged, compact, non-corrosive design
• Simple installation and repair
• Twin line hose connection
• Combined position construction
• Large internal passage for increased blasting abilities

AVAILABLE FOR RENTAL OR PURCHASE

• FREE Shipping
• 30 Day Money-Back Guarantee | Free Returns
• Will vacuum upto 2 ton/hour
• Requires 350 cfm compressed air at 120 psi
• 1 Dust Collector Cartridge with filtration area of 229 sq ft.
• Automatic Reverse Pulse Cleaning
• Use with 3″ vacuum hose

AVAILABLE FOR RENTAL OR PURCHASE

• #1 Deadman in the industry
• Larger internal ports make it faster acting, making it a safer handle
• Compact, slimline design – 30% easier then other handles to hold down
• Simple to make in-field repairs as required
• Available as Electric or Pneumatic
• Geniune Products – Manufactured by Schmidt / Axxiom Manufacturing

• Piston-operated valve
• 1/4″ female NPT supply air connection
• Effortless activation via deadman control handle
• Guide tubes ensure consistent plunger travel
• Eliminate repressurization down time profit loss

• Suits FMCF 4-Claw Crowsfoot Couplings
• Check coupling gaskets daily – worn gaskets will leak air
• Keep spares in your toolbox
• Come in a pack of 10
• Genuine NECO parts

• ASAP Safety System Retrofit Kit for 12V DC Thompson® Valve system.
• This System changes the depressurization flow of the air in the blast hose
• Allows a 200ft blast hose to depressurize in less than 1 second
• Changes the depressurization flow to exit backwards through full porting vs having to exit out of the blast nozzle
• Saves Seconds – Saves Lives, if a blaster drops a hose every micro-second counts, it takes the energy out of the hose immediately.
• Sold as a complete kit to be added on to an Electric Controlled Thompson® Valve Blast Pot
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

FREE Shipping

30 Day Money-Back Guarantee | Free Returns

90 Day Manufacturer Warranty

• The most versatile, easy-to-regulate dry blast machine on the market
• 10-150psi blasting pressure range
• With a load skid combined with an inlet filter, this product uses a differential pressure gauge to allow accurate “metering” of hard-to-flow abrasives like Soda and fine Garnets
• With regulators for the blast and tank pressure for accurate control, this product can be used with most abrasive types – fine to coarse
• With the addition of a media vibrator to improve light media flow and an easy-to-use media shut-off valve this unit is perfect for graffiti removal and all other types of soda blasting
• G2 pneumatic deadman control, 55′ twinline control hose, 55′ water line with wet blast attachment for dust suppression included with purchase

Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

When your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need.  This is the bumper for the bottom of the handle grip.

• Bottom bumper to protect the blasting hose
• Durable and reliable construction
• Sold in quantities of 2 per pack

AVAILABLE FOR RENTAL OR PURCHASE

• 170HP T4 John Deere Diesel
• 2367 CFM, 28″ static pressure
• Mounted on 2-axle road legal trailer
• Will convey between 7-11 tons of abrasive per hour
• Primary Filtration – Coated Bags, pulse air cleaned
• Secondary Filtration – Pleated Cartridge
• Max Vacuum hose 5″
• Empty weight 10,500lbs
• Dimensions 7’5″ L x 8’5″ W x 11’2.5″ H

• 2-pin Twistlok plug
• For use with Clemco remote control systems only

• Industrial-Grade Muffler for Pressure-Release Blast Pots
• Safer and much longer lasting than ‘throw-away’ mufflers
• Reduces blow-down noise to approx. 110 dB.
• Intercepts abrasive that may otherwise escape when depressurizing
• Sold as a Field-Installable Retrofit Kit including;
  • VBS II Exhaust Muffler
  • Mounting Bracket (Attaches to Combo Valve)
  • Any required fittings
  • Does not include a new Blow Down hose
• Genuine Products – Manufactured by Axxiom Manufacturing/Schmidt
• Note:  This muffler comes standard on Schmidt combo-micro blast pots from BlastOne.
• Also available for Pressure-Hold systems here

• Industrial-Grade Muffler for Manual Blow-Down (Pressure-hold) Blast Pots with Thompson valve or TeraValve
• Safer and much longer lasting than ‘throw-away’ mufflers
• Reduces blow-down noise to approximately 110 dB
• Intercepts abrasive that may otherwise escape when depressurizing
• Sold as a Field-Installable Retrofit Kit including;
  • VBS II Exhaust Muffler
  • Mounting Bracket (Goes on blast pot leg)
  • Blowdown Hose Assembly
  • Ball Valve and required fittings
• Genuine Products – Manufactured by Axxiom Manufacturing/Schmidt
• Also available for Pressure-Release pots here

• 3-pin Quick connector
• ‘TwistLok’ action designed to prevent cables from accidentally disconnecting
• Panel mount available DM ECK100
• 3-Pin / 3-Prong Twistlok are most commonly used for deadman cable
• 2-Pin / 3-Prong Twistlok commonly used for Electric Power Supply
• Sold Individually

Elevate your sandblasting assembly with the 1-1/4″ Rubber-Lined Wye, expertly designed to connect the flat sand valve to the pusher line, blast hose line, and blast pot nipple. This Y-piece pipe fitting is engineered with 1-1/4” x 1-1/4” x 1-1/4” standard NPT female threads and features a durable rubber-lined steel construction for an extended wear life.

• Ensures seamless integration with your sandblasting system.
• Durable rubber-lined steel construction for maximum longevity.
• Standard 1-1/4” NPT female threads for universal compatibility.
• Direct replacement for OEM parts: Clemco 01818 and Axxiom 3012-107.

• Pneumatic Complete Retrofit kit includes:
• Triple-line coupled remote control hose
• Control hose connections for air supply
• Auto air valve and Thompson Valve II metering valve
• Pneumatic push-pull abrasive on-off switch
• Response deadman handle

• To replace the valves on your pressure release blast pot
• Retrofit Kit includes:
  • 1 1/4″ Combo Valve
  • 1 1/4″ MicroValve 3
  • Full pusherline kit
  • All interconnecting hoses
  • Control line strainer and control valve
  • Response deadman handle and Deadman line

AVAILABLE FOR RENTAL OR PURCHASE

• 235HP T4 Diesel Engine
• 3660 CFM, 28″ static pressure
• Mounted on 3-axle road legal trailer
• Will convey between 15-20 tons of abrasive per hour
• Primary Filtration – Coated Bags, pulse air cleaned
• Secondary Filtration – Pleated Cartridge
• Max Vacuum hose 6″
• Empty weight 13,950lbs
• Dimensions 21′ L x 8’2.5″ W x 11’4″ H

• Pneumatic lift with three dimensional movement capability.
• Used in a paint booths of up to 20′ Wide x 26′ High
• Wall mounted, with adequate floor clearance for hoses etc.
• CE, CAS, and UL certified, ATEX compliant
• Operator controls the console from the platform
• Extra air outlet for tools inside the basket

• Pneumatically operated via twinline hoses
• Compatible with all twinline pneumatic remote control systems
• 1/4″ and 1/8″ air supply threaded connectors
• Operate by pulling down the safety flap and hold the large handle down

Buying the gear for a new blaster can be time consuming when you forget some of the most common items needed. BlastOne is proud to offer its New Blaster bundle that packages up the most common items a blaster needs to get them going for the first 6 weeks of blasting. Not only will this bundle provide the peace of mind that your blaster is operating in full comfort and safety, but you’ll save over $300 otherwise spent ordering these critical items separately!

This bundle includes the following:

• Nova 3 Blast Helmet with C40 Respirator & standard 28″ cape
• 6 weeks worth of Lenses: 10 safety inner and 40 cassette replacement (total 250 lenses)
• 50′ Breathing Air hose (connects respirator to filter)
• Premium BlasterAll Blasting Coveralls
• Premium BlasterAll leather blasting gloves with Kevlar protection
• Helmet Carry Bag (Holds your helmet and has handy compartments for spare lenses
• And more!

The Item Size field signifies the size of blast suit and gloves included in the bundle, i.e., selecting New Blaster Bundle – 2XL will include an XXL blast suit and gloves.

• For use with Nylon Coupling Series: PCG-1; PCG-2; PCG-3;
• Material: Double-lipped rubber
• Compatibility:
  • PCG-1: 3/4″ ID and Smaller Blast Hose
  • PCG-2: 1″ ID Blast Hose
  • PCG-3: 1-1/4″ ID and Larger Blast Hose
• Sold as a pack of 10

• Suit Blast and Vac Workhead VCBV200
• Fine Thread Nozzle Holder
• Connects Blast hose to the nozzle and the workhead.
• You can not use the Workhead without this
• Sold Individually

Heavy-duty pipe fitting connects flat sand valve to pusher line, blast hose line, and blast pot nipple.  Specifications:

• 150# malleable iron wye
• 1-¼” x 1-¼” x 1-¼” standard NPT female threads

This common wear item is also available with rubber lining to extend life – see You May Also Like below.

This 1-¼” ID Pipe Nipple connects the flat sand valve to the blast hose coupling.

This common wear item is rubber-lined for extended life.