Search: GRACO XHD HEAVY DUTY RAC SPRAY TIP

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

• This 7250 PSI Airless Spray Tip group has 14 to 16 inch fan width (XHD7 series).  
• In this group, the orifice sizes range from .011 to .071 (sizes 711 to 771)
• Ideal for use with industrial high solids and heavy duty coatings
• Heavy-duty carbide tip construction
• Designed to be used with the Graco XHD Tip Guard
• Genuine parts – manufactured by Graco

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

• This 7250 PSI Airless Spray Tip group has 4 to 6 inch fan width (XHD2 series). 
• In this group, the orifice sizes range from .009 to .039 inches (sizes 209 to 239)
• Ideal for use with industrial high solids and heavy duty coatings
• Heavy-duty carbide tip construction 
• Designed to be used with the Graco XHD Tip Guard
• Genuine parts – manufactured by Graco

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

• This 7250 PSI Airless Spray Tip group has 18 to 20 inch fan width (XHD9 series). 
• In this group, the orifice sizes range from .023 to .039 (sizes 923 to 939)
• Ideal for use with high solids and heavy duty coatings
• Heavy-duty carbide tip construction
• Designed to be used with the Graco XHD Tip Guard
• Genuine parts – manufactured by Graco

The Graco XHD Heavy Duty RAC (Reverse-A-Clean) tip is designed for the XTR and XHF guns.  Additional details as follows:

• This 7250 PSI Airless Spray Tip group has 10 to 12 inch fan width (XHD5 series).
• In this group, the orifice sizes range from .009 to .075 inches (sizes 509 to 575)
• Ideal for use with industrial high solids and heavy duty coatings
• Heavy-duty carbide tip construction
• Designed to be used with the Graco XHD Tip Guard

Experience the Graco XTR 7 Airless Paint Spray Gun (SKU: P-GRXTR), a high-pressure industrial spray gun with a 7250 psi rating, lightweight design, and exceptional spray patterns.

• High pressure industrial spray gun – designed to take on the toughest protective coatings
• Form-fitted handle, lightweight design with a two- or four-finger trigger
• Self-locking needle design for faster rebuilds, so there is no needle adjustment required
• Flat tip provides top-notch life, pattern and finish
• Easily removable gun filter with trigger guard integrated wrench for cleaning purposes
• XTR7+ is 7,250 psi rated and the XTR 5+ is 5,000 psi rated
• Genuine Parts – Manufactured by Graco

• Suits Graco XHD Airless Spray Tips
• 7250 psi rated
• Works to keep the tip in place, provide easy switch out and reduce the chance of injury
• Hand-tight guard – no tools required
• Long life guaranteed
• Tip and guard are interchangeable with the GHD spray tip
• Use with industrial high solids and heavy duty coatings
• Genuine Parts – Manufactured by Graco

• Suits Graco RAC 5 Airless Spray Tips
• Works to keep the tip in place, provide easy switch out and reduce the chance of injury
• Thread Size is 7/8″
• Sold Individually
• Genuine Parts – Manufactured by Graco

• Reversible Tip to allow easy clearing of blockages
• 4050 psi rated
• Direct replacement for RAC 5 and RAC V tips
• Blue arrow-top handle
• Longer life, liquid honed tip insert
• Factory tested
• Sold Individually
• Genuine Parts – Manufactured by Graco

• Electric
• No icing
• Reduced Noise
• Plug-in & Spray
• Hazardous Location approved
• Energy savings
• Pump type: Xtreme

• Soft Comfortable Calico fabric Paint hood
• Keeps the dust and overspray out of your hair and neck
• Low cost, disposable design
• Elastic face opening
• Sold as a pack of 10 hoods

• FREE Shipping
• 30 Day Money Back Guarantee | Free Returns
• Suits Graco King and Xtreme Airless Sprayers
• Suction Kit for Xtreme Pump Kit
• Kit includes
  • 6′ x 1″suction hose
  • Quick knock off coupling for attaching to pump
  • Bent 18″ pick up tube for suctioning paint from a 5 gallon pail
  • Elbow and adaptor nipple
• Sold as a Kit
• Genuine Parts – Manufactured by Graco

• Suits Graco XHD Airless Spray Tips and Guards
• XHD Heavy Duty OneSeal Seat and Seal Kit
• Seals spray tip to minimize leaks and maintain optimal tip pressure 
• Sold as a pack of 5 seals
• Genuine Parts – Manufactured by Graco

The Tritech T93R 5000 psi Airless Spray Tip (SKU: P-SMT200) offers a double-orifice premium finish suitable for airless spray units up to 5000 psi.

• Optimized for Airless Spray Units up to 5000 psi.
• Double-orifice design uniquely atomizes the coating twice for superior coverage.
• Experience the finesse of the second atomization, which offers a finer finish than the first.
• Durably constructed from tungsten carbide, ensuring an extended lifespan.
• Seal design guarantees impeccable alignment of the tip for precise application.
• Compatible with Tritech tip guard; easily adaptable to the Graco gun when required.

As a genuine product by TriTech USA, the Tritech T93R 5000 psi Airless Spray Tip stands as a beacon of quality, ensuring that each paint application is nothing less than perfection.

• Designed and manufactured to meet the current Spray Booth Standards – AS4114
• Most booths are customised to individual needs from modular constructions
• Can incorporate any type of draft system
• Heavy duty door design ensures long life
• 12 month warranty

• Reversible Tip to allow easy clearing of blockages
• 4,050 psi rated
• Industrial spray tip with consistent spray pattern
• Black arrow top handle
• Large, tip-size marking on the handle
• Includes OneSeal one-piece gasket and seal
• Sold Individually
• Genuine Parts – Manufactured by Graco

The Tritech MAXX 7500 psi Airless Spray Tip (SKU: P-SMT207) is designed for heavy industrial coatings, offering a double-orifice premium finish and a maximum working pressure of 7500 psi.

• Suitable for Airless Spray Units up to a whopping 7500 psi.
• Designed with heavy industrial coatings in mind.
• Double-orifice feature ensures a seamless and premium finish.
• 3-component design enables rapid and safe tip changes.
• Built from durable tungsten carbide ensuring prolonged life.
• Seal design assures perfect alignment of the tip.
• Compatible with Tritech tip guard and adaptable to the Graco gun.

A genuine product by TriTech USA, the Tritech MAXX Airless Spray Tip stands as a testament to quality and reliability in the realm of industrial painting. It not only promises durability but also efficient results in every use.

• Durable Construction: Made from premium materials
• Secure Grip: Firmly holds the spray tip in place
• Easy Installation: User-friendly design for effortless setup
• Precise Spray Control: Achieve desired coverage and consistency

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

The PosiTector Surface Profile Gauges have replaceable tungsten carbide tips and are available as follows:

• 60° Angle for ASTM (USA) applications, used in the Integral, Standard Cabled, and Convex Cabled probes.
• 30° Angle for AS 3894.5-C (Australia) applications, also used in the Integral, Standard Cabled, and Convex Cabled probes.
• CS Tip for Textured Coatings probes.
• TS Tip for Concrete Surface probes.

These tips ensure accurate measurement of surface profile and should be replaced when worn.

Each tip includes a tool to facilitate replacement.

• Tip size: 0.026”
• Made of Tungsten Carbide
• Efficient cleaning with powerful and focused spray
• Extended reach for accessing hard-to-reach areas
• Durable construction for long-lasting performance
• Hassle-free installation for quick integration

• Tip size: 0.011”
• Made of Tungsten Carbide
• Efficient cleaning with powerful and focused spray
• Extended reach for accessing hard-to-reach areas
• Durable construction for long-lasting performance
• Hassle-free installation for quick integration

• Tip size: 0.018”
• Made of Tungsten Carbide
• Efficient cleaning with powerful and focused spray
• Extended reach for accessing hard-to-reach areas
• Durable construction for long-lasting performance
• Hassle-free installation for quick integration

• Suit Blast and Vac Workhead VCBV100 Large Wheeled Unit
• Replacement flat brush creates a seal with the surface to capture dust and abrasive
• VCBV100 Workhead uses a single large flat brush seal
• Sold Individually

AVAILABLE FOR RENT OR PURCHASE

A Graco King Paint Sprayer Pump will easily spray:

• Medium to Ultra-high viscosity coatings
• Plural component coatings
• High-build, high-solids epoxy primers and coatings
• High-build, high-solids Polyurethane top coatings
• Waterborne coatings
• Fire retardant coatings
• Pump Size Calculator

• Conventional Air Spray Gun, most commonly used with Pressure Pots
• The Binks 2100 Spray gun is renown in the industry for long lasting quality
• Ideal for spraying medium to light coatings
• Fully rebuildable with the related repair kits
• Choose your tip size based on your paint datasheet recommendation
• Genuine Parts – Manufactured by Binks

The Ultra Spray Airless Whip Hose (SKU: P-SPH06) offers enhanced flexibility and movement with its 6ft lightweight design. Fitted with safety spring guards, it’s the ideal choice for airless spray gun operations.

• Safety spring guards fitted to whip hose ends
• Lightweight, flexible hose makes spray gun movement easier for the operator
• 3300 psi hose is nylon braid, others are steel braid
• 6ft length

AVAILABLE FOR RENT OR PURCHASE

• Newest member of the Graco King family, designed for increased portability and affordability.
• Unparalleled finish quality with cutting-edge anti-icing technology
• Robust, low-profile design offers extreme mobility
• XL6500 Air Motor
• Purchase package includes Silver Plus™ Gun, 3/8″ x 50ft hose, 1/4″ x 6′ whip hose, XHD 417, 519 SwitchTip™ & Guard

• Suits Graco RAC X Airless Spray Tips
• Works to keep the tip in place, provide easy switch out and reduce the chance of injury
• Thread Size is 7/8″
• Sold Individually
• Genuine Parts – Manufactured by Graco

• Graco Contractor Airless Paint Spray Gun
• 3600 psi rated Airless Spray Gun
• ComfortGrip grip handle and 2 finger trigger
• EasyAccess #60 filter inside handle (Use GR287032)
• Inbuilt high-pressure swivel
• Includes 517 RacX Tip and Base
• Genuine Parts – Manufactured by Graco

Experience safety and comfort with the Bullard Heavy Duty unlined leather Blast Gloves. Crafted using resilient Kevlar thread, these gloves are a fortress for your hands.

• Extra-long 8-inch cuff: Maximum forearm protection
• Kevlar thread construction: Exceptional strength and durability
• Reinforced cowhide palm: Enhanced grip and resilience
• Pre-curved fingers: Optimal hand mobility
• Available in sizes Medium – XX-Large
• Sold by the pair or in a pack of 6

Hose set includes:

• 25ft Air/Fluid, bundled hose
• Stainless steel couplings to fit AirPro spray gun

Suits Triton / Warrior 3/8″ Paint Fluid Line / 1/4″ air line 

MPN: 233499

• The original King High-Flow Sprayer from Graco is proven to outperform and outblast other sprayers in it’s class.  
• This mid-size XL6500 Air Motor can handle large jobs that require a high-output sprayer, to support multiple spray guns
• Includes: Integrated filter, heavy duty cart, air kit, siphon kit and hose/gun kit
• Genuine product – manufactured by Graco
• Pump Size Calculator

• Graco Contractor In-line Spray Painting Gun
• Used in applications where you are not spraying directly from the Gun
• Works with Pole Sprayers, Internal Pipe Sprayers and other hard to reach areas
• 3600 psi rated
• Ergonomic, lightweight, design
• Easy trigger pull
• Built-in SmoothGlide hose swivel connector
• EasyAccess filter in handle
• Sold Individually
• Genuine Parts – Manufactured by Graco

• Comfortable elastic stretch fabric designed for Painters and Blasters
• Can be worn three ways (over nose, under nose, under chin)
• Close fitting design, ideal for wearing underneath a blast helmet or spray hood
• Helps keep the blast helmet more hygienic, by capturing body sweat
• Sold as a pack of 10 hoods
• Genuine Products – Manufactured by RPB Safety

• Includes Hand Tite RAC 5 Tip guard (RAC X available – please check availability)
• Unique captive gasket for simple, fast connection
• 7/8″ nut fits Graco or Titan airless guns
• 4,050 psi rated
• Purchase spray tip separately

Needing higher pressure rated extensions? Please contact BlastOne for details

• High Pressure Nipple for use as a spray hose joiner
• Use to connect two spray hoses which have female threads
• Available as a straight nipple or reducing nipple
• 7250 psi rated
• 30 degree internal seat, both ends
• Sold Individually

• Replacement Tungsten Carbide Deflector Tip for BNATC360C internal pipe blasting nozzle. 
• Ensures optimal blasting efficiency and durability.

• 8-ounce bottle of Throat Seal Liquid (TSL).
• Prevents paint drying on the displacement rod and packings, reducing wear.
• Extends component life of your paint spray pumps.
• Specially formulated to dissolve material on displacement rods.
• Suitable for all Paint Spray Pumps.
• Ensures throat seal packings remain lubricated, preventing the pump from running dry.
• Genuine Graco-manufactured part.

• Suits TriTech 7500psi MAXX spray tips
• Safety guard for help ensure you don’t inject yourself
• Large knurls assist grip when tightening
• Suits Graco Standard Airless Guns
• Sold Individually
• Genuine Parts – Manufactured by TriTech USA

• E-Xtreme Electric High Performance Airless Pump
• The Graco Z60 Sprayer is an electric alternative to air-operated single leg sprayers.
• It produces a smooth, consistent, evenly distributed spray pattern without the need to tow a large compressor.
• Will pressurize up to 6000psi working pressure
• Sprayer package in
  • Graco Z60 Electric Airless Pump
  • Includes Heavy Duty Cart
  • 3/8in x 15m Spray hose, 1/4in x 1.8m whip hose,
  • Graco XTR704 Spray gun with  XHD519 spray tip
• Genuine Products – Manufactured by Graco

• An effective means of applying waterborne- and solvent-based materials
• High quality and long lasting
• Fully rebuildable with the related repair kit
• Features fluid passages made from 300-grade stainless steel, preventing internal corrosion
• Body is made from drop forged aluminum
• Fluid inlet: 3/8″ NPS (M)
• Air inlet: 1/4″ NPS (M)
• Weight: 21.6oz.
• Feed type: pressure feed, suction feed

• Designed and manufactured to meet the current Spray Booth Standards – AS4114
• Used to make a dedicated painting area
• Compact design providing better airflow
• 0.03″ thick galvanized sheet metal work area
• Modular design, Simple screw-together construction
• 12 month warranty

• Conventional
• 1.8mm nozzle with plastic gravity cup
• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomisation through material-specific air caps
• Well balanced and lightweight (410 grams) gun makes it easier to spray at a steady rate all day
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimise spray performance with cutting-edge air cap and nozzle design

Step up your safety game with the Bullard Heavy Duty Nylon/Cotton Blast Suits. Expertly engineered for the professional blaster, these suits blend durability with comfort.

• Sweat-wicking fabric: Nylon-cotton blend for enhanced airflow
• Robust design: Parallel seams and extra reinforcement
• Optimized for professionals: Feature-rich and long-lasting
• Grey
• Size options: M, L, XL, 2XL, 3XL, 4XL

• ComfortGrip grip handle, 2 finger trigger.
• Exclusive ‘FlexSeal’ needle seal prevents wear.
• EasyAccess filter in handle.
• SmoothGlide hose swivel connector – for effortless gun movement control.
• 3600 psi rated.
• Stainless steel fluid tube, aluminium head.
• Optional 4 finger trigger conversion available.
• Includes Hand Tite RAC 5 tip and guard.
• Filter inside handle – GR 287-032, 60#

• Exclusive FlexSeal needle – extends need life life by up to 70%
• Reduced gun spitting – less paint left between needle and tip
• Ergonomic design – form-fitted handle for max comfort and control
• Trigger lock – easy trigger pull with thumb-engaged safety lock
• East out gun filter – interchangeable with all Contractor series guns

• RPB blast suits enhance worker comfort and protect the wearer from abrasive rebound.
• The heavy-duty breathable cotton back helps keep you cool.
• Robust nylon zipper with protective cover
• Heavy-duty nylon gives extra protection to the arms and fronts of legs and has abrasion resistance for a longer life.
• Elasticized waist for a comfortable fit (takes the weight off the operator’s shoulders).
• Elasticized wrist and adjustable ankle cuffs to keep abrasive out.
• Seven different sizes from S to XXXXL.
• Triple stitched.
• Optional Knee Pads are available.
• Suit does not come with a hood.
• Sold Individually
• Genuine Products – Manufactured by RPB Safety
• See also BlastOne’s new BlasterAlls Blast Suits 

BLASTHOSE

• High quality, long lasting sandblasting hose
• Blast Hoses have a thick, anti-static, natural rubber liner
• Made to BlastOne Blast Hose specification
• Rated to minimum 175 psi – 3:1 safety factor
• Robust TuffRap™ outer blasting hose cover
• Heavy Wall Blast Hose
• Recommended for use as an extension hose
• Fit with your choice of couplings
• Supplied as a bare hose coil or as a Certified Blast Hose Assembly – certificate is available upon request.

• Suits Warrior 4000 Conventional Sprayer
• Diaphragm Repair Kit
• Long Lasting, high quality parts
  • 2 Diaphragms
  • 4 nylon check ball seats
• Sold as a Kit

• Trelawny Needle Scalers for rust, scale and paint removal
• Heavy Duty, High Quality Hand Tools
• Pneumatic Operation
• Preferred option for Low Vibration, someone can work for twice as long with Low Vibration
• Come with a different quantity of needles, the more needles the more work you get done.
• Pistol Grip vs Inline based on where you are working, most contractors use 5:1 Pistol Grip
• Sold Individually
• Genuine Parts – Manufactured by Trelawny

The deflection tip in the ConeBlast Jr. internal pipe blaster is responsible for ensuring an even blast pattern.  The abrasive stream hits the tip and fans out in a 360° pattern.  It is subject to high wear and is a common replacement part.  Additional details:

• Application:  This tip works only in the ConeBlast Jr., not the larger ConeBlast version.
• Construction:  This tip is made from tungsten carbide.  For large pipe-cleaning projects, contact us for options on longer-life versions.

Revolutionize your surface preparation with Trelawny Stainless Steel Flat Tip Needles, 3mm, SKU: HT4431207. These durable needles are ideal for needle scalers, ensuring precise and effective work.

• Crafted from high-quality stainless steel.
• 3mm flat tip design for accuracy and efficiency.
• Box contains 500 robust needles.
• Ideal for a wide range of surface preparation tasks.

Perfect for professionals seeking reliable and long-lasting needles for their needle scaler tools.

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

As part of the PosiTector SST test process, deionized water must be injected under the patch.  These replacment dispensing tips are used with the PosiPatch magnetic rings and are available as replacements in this convenient package of 10 units.

MPN:  SSTDISPTIP

• Suits TriTech 4200psi T93R spray tips
• Safety guard for help ensure you don’t inject yourself
• Large knurls assist grip when tightening
• Suits Graco Standard Airless Guns
• Sold Individually
• Genuine Parts – Manufactured by TriTech USA

• Replacement Lower with built-in filter
• Retrofit an Xtreme pump lower to an existing old-style King or Bulldog air motor
• Improved performance especially with higher pressures 45:1, 56:1, 68:1, 80:1 ratios
• Reduced solvent usage quicker and easier to flush
• Extended life component
• Fast, simplified servicing with quick knockdown intake valve and cylinder

• Suits Warrior 4000 Conventional Sprayer
• Ball Check Repair Kit
• Sold as a Kit that includes all the Balls, Seats and Seals for the Warrior Pump
• Long Lasting Genuine Parts

• Suits Graco XTR-7 Airless Spray Gun
• Suits Graco Silver Plus Gun and Flex Gun
• Includes the necessary Replacement Parts to enable a full repair
• Sold as a Kit
• Genuine Parts – Manufactured by Graco

Graco’s industrial XP plural unit has been customized for EonCoat applications. It is similar to the XP35 with the 1:1 mix ratio and 3500 PSI delivery, and has the following changes:

1. The lower air is the 290cc SST DuraFlo.
2. The Air Motor is the XL6500.
3. The recirculation manifold is Stainless.
4. The gun is the PerformAA Automatic Air-Assisted version.

For a remote mix manifold, the recommended version is the GR24W861, available here.

• Can be used in tip filter housing, swivel spray nozzle or inline filter
• 0.009″
• #60 mesh
• Genuine Graco part #205265

• Robust design includes durable forged aluminum to endure harsh environments
• Easy to clean and lighter than competitor guns
• Exclusive needle design is guaranteed for life against breakage and factory set needle requires no trigger adjustments
• Stainless steel fluid tube allows direct flow to the tip via gun fluid tube
• Able to spray heavier materials including high solid coatings and mastics

When your Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Cylinder (Heavy Duty) (613.5303).

The Crocodile® Cloth family of heavy-duty disposable wipes are perfect for the most robust of messes. Don’t just push the mess around – which is what you get with ordinary wipes – clean it!

Dominate Grime, Guck and Goo!

• 4X more effective than comparable wipes
• Extra-tough cleaning formulation
• Scratch resistant on most surfaces
• 15in x 10in standard size
• No harsh chemicals
• Specially formulated solution demolishes grease, oil and adhesives
• Use on the job site or at home
• 80-100 wipes per pack
• Perfect for industrial, manufacturing, DIY, automotive and construction markets

When your Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Single Piece Heavy Duty Piston (Bush) (612.5325).

When your scaling hammer needs refreshed, we have the replacement parts you need. This is the Single-Piece Heavy Duty Cruciform Piston (612.5320).

• Suits internal pipe spray tips for the ConeSpray Internal Pipe Coating Tool (IPC80300)
• Compatible with most fluids
• Easy installation without the need for tools
• Sold in packs of 25

When your SF3 Triple Head Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Triple Scaler Body (Heavy Duty) (611.5355).

When your SF1 Single Head Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Single Scaler Body (Vibration Reduced, Standard, and Heavy Duty (411.5121).

When your SF1 Single Head Scaling Hammer needs refreshed, we have the replacement parts you need. This is the Single Scaler Body (Standard and Heavy Duty) (411.5101).

• 1-1/4″ Heavy Duty Media Inlet Nipple with increased abrasion resistance
  
• Connects Metering Valve to Blast Pot
  
• Suits all Schmidt Abrasive Blast Pots, and any other vessel with a 1 1/4″ NPT Metering Valve Ports

• Complete Spray Paint Gun Cleaning Kit
• Ultimate Cleaning kits to give you better spray gun operation. Durable, solvent-compatible storage – keeps your tools organized
• Safe to use with solvents
• Durable long lasting tools
• Works with most types of spray guns such as suction, gravity, pressure feed, detail, HVLP, as well as airbruses
• Sturdy storage case included
• Genuine Parts – Manufactured by Graco

• 8 blades in 1!
• 18mm, 3/4″
• General purpose silver blade
• Ergonomic grip
• Premium carbon tool steel LB blade for superior sharpness and edge retention
• Heavy-gauge stainless steel blade channel secures blade
• High-impact ABS plastic handle
• Ensure maximum blade security with ratchet-wheel lock

• High-performance industrial spray gun
• Form fitted handle – lightweight design
• 2 finger trigger (optional 4 finger)
• No needle adjustment required
• Stainless steel fluid passages
• Lifetime guarantee against needle breakage
• 5000 psi rated
• Includes Hand Tite RAC tip and guard
• Optional Flex Plus gun without fluid tube has direct hose connection for minimal pressure loss

• Suits Graco XTR and Series II Airless Spray Guns
• 100# mesh coating spray gun filter for in handle filter units
• #100 Mesh Gun Filter recommended for thinner coatings
• Sold Individually
• Manufactured by Bedford Precision Parts 

• Suits GX4 Gas Monitor
• Designed to keep the GX4 protect from the rigors of contractor treatment
• Includes bracket for mounting the GX4
• Weather tight to keep the rain off the electronics
• Sold Individually
• MFR # 08-424
• Genuine Parts – Manufactured by RPB Safety

Ultra Paint Spray Airless Hose (SKU: P-SPH50) delivers high pressure performance with a 3:1 safety factor, featuring swivel nut female connectors and safety spring guards.

• High-pressure airless hose, tailored for superior spray results.
• Features a 3:1 built-in safety factor, offering protection against pump runaway.
• Convenient swivel nut female connectors ensure easy fit-up, locking up rigidly when tightened.
• Enhanced safety with spring guards fitted to whip hose ends.
• The 3300 psi hose boasts a durable nylon braid, whereas other options come with a robust steel braid.
• Customizable offerings with multiple pressure ratings, sizes, and lengths available.

CopperVac is the heavy-duty vacuum hose for highly abrasive media recovery. Featuring a polyurethane liner, rigid PVC spiral reinforcement, and copper wire for static dissipation, it’s perfect for sand and gravel vacuuming as well as any abrasive blasting media. Available in a range of sizes, experience the power of CopperVac now!

• Heavy duty, extra thick abrasion-resistant liner
• Rigid PVC spiral (counter-clockwise helix)
• Flexible, even in cold temperatures
• Copper wire, for static dissipation

The Fitted Chicago Air Supply Hoses are heavy-duty, 300psi rated hoses, designed with high-quality EPDM synthetic rubber for optimum durability, ideal for powering machinery, tools, and air motors. They come prefitted with Chicago-style couplings, ensuring a secure, easy-to-use solution for your air supply needs, with other sizes available upon enquiry.

• 30 Day Money Back Guarantee | Free Returns
• Heavy duty rubber air supply hose – fitted
• High Quality, EPDM Synthetic rubber cover and tube
• 300psi rated
• Ideal for Machinery, tools and air motors
• Not Rated for Breathing air
• Prefitted with Chicago-style couplings

Other sizes available – enquire.

The Portable Moisture Separator offers enhanced blasting productivity through highly effective moisture droplet removal, rated for up to 800 cfm airflow volume at 150 PSI. Designed for durability, this in-line system features an expansion flow-chamber with an internal stainless steel coalescer for non-restrictive, efficient moisture removal, ensuring clean, dry air for up to 15% faster blasting. Portable and easy to set up, it includes an axle, wheels, and handle, making it an indispensable tool for achieving peak productive blasting with minimal pressure loss.

• Inlet size 2″ (50 mm) female thread
• Outlet sizes: 2″ (50 mm) female thread – 1″ (25 mm) female thread – plugged (top outlet)
• Rated for up to 800 cfm airflow volume at 150 PSI
• Connected in-line close to blast machine
• Expansion flow-chamber design with internal stainless steel coalescer
• Highly effective moisture droplet removal for peak productive blasting with minimal pressure loss
• Supplied with manual drain valve
• Includes axle, wheels and handle
• Air fittings not included – specify and order separately

• Exceptional spray finish quality
• Lightweight and robust gun
• Ergonomic design for operator comfort and control
• Air inlet swivel for ease of movement
• Unique replaceable PEEK or stainless steel needle tip reduces maintenance costs
• Superbly engineered with few parts – simple to disassemble for cleaning and service
• Convertible between airspray and compliant (HVLP models also available)
• Available in pressure feed, siphon feed or gravity feed setups with or without cups

The Warrior conventional spray pump (aka Graco® Triton) is a popular upgrade to pressure pots.  Most see the following benefits:

• Saves money. Reduces solvent use by up to 75%. 
• Saves time.  Cleanup is up to 3 times faster.
• Easy to use.  Allows you to watch how much coating you have remaining in the can.
• Versatile.  Can be configured to support 2 operators.
• Specs can be found on the Description and Documents tabs
• Kit comes with 1.4 mm AirPro Spray Gun and 25 feet of Twin Air/Paint Hose
• Available as Pail Mount, Stand Mount, Cart Mount, or Wall Mount
• Optional Agitator available to use when spraying zinc
• Optional Upfit Kit available allows a single pump to do double duty by allowing 2 operators 

• Designed for high production applications
• 5:1 Pump Ratio
• Often used as a solvent flush pump on larger Plural Component Spray Systems
• Pneumatic 2-ball piston pump
• Maximum Flow Rate 2.1 GPM
• Genuine Parts – Manufactured by Graco

• Used for the handling of high-viscosity coatings
• Prime alternative to troweling
• Ideal for touchup jobs and/or difficult-to-reach areas
• 5-gal dual post ram provides ample down force to load pump
• 290 cc Xtreme lower designed specifically for heavy viscosity material
• Tool-less wiper plate removal for easy maintenance
• Durable, rugged cart allows for single-person maneuverability

• 48:1 pump ratio – 100 psi inlet pressure will deliver 4,800 psi spray pressure
• Ideal for use as a solvent flush pump on a 2 component painting system
• Lower size is 75cc
• Comes with 50ft spray hose, 6ft whiphose, XTR504 gun and RAC tip
• Genuine product – manufactured by Graco

• Easy to operate
• Utilizes Graco’s popular King and Xtreme airless spray technology
• 2:1 fixed ratio with 115/58 cc lowers
• Lowers have with built-in filters
• Cart mounted
• Comes with material hoses and XTR-7 gun
• Uses an NXT 6500 Air Motor
• Pump Size Calculator

• Complete System to spray Passive Fire Protection (PFP) coatings
• Uses a base Graco XM sprayer and includes
  • Two Check-Mate® 20-gal (76 l) heated hopper feed modules with agitators and level sensors
  • 50 ft (15 m) dual heated hose set
  • Remote mix manifold and 17 ft (5 m) of static mixing line
  • 30:1 solvent flush pump
  • XHF Gun with 429 tip.

• Can be used in tip filter housing, swivel spray nozzle or inline filter
• 0.005”
• #100 mesh
• Sold in packs of 5
• Genuine Graco part

• Suits Graco XTR and Series II Airless Spray Guns
• 60# mesh coating spray gun filter for in handle filter units
• #60 Mesh Gun Filter
• Sold Individually
• Manufactured by Bedford Precision Parts 

• Heavy-duty leather front for protection of arms and legs, extending coverall life.
• Strong cotton back for ventilation and comfort in hot climates.
• Ties at sleeves for adjustable fit, keeping out residue, media, and dust.
• Optional leather gauntlet gloves for added protection of hands and wrists.
• Available in six different sizes, from S to 3XL, ensuring a suitable fit for every operator.
• Press stud closures and Velcro strip fastening for double protection from grit ingress and resistance to damage from steel grit.
• Compatible with Nova3 blast helmets and blast capes (HLNV3752 or HLNV3753) for full leather front protection.
• Designed to meet the most stringent government guidelines.
• Tough cowhide covers ensure protection, while strong cotton back enables suit to ventilate for comfort in hot climates.
• Leather fronted sandblasting suits guarantee protection from harmful abrasive ricochet and momentary direct impact.
• Heavy-duty half leather fronted abrasive blasting suit (leather front extends from the waist down).
• Comfortable ‘breathable’ cotton back.
• Adjustable wrist and ankle straps.
• Front press stud and Velcro strip fastening.
• Most commonly used when blasting with steel grit media.
• Sold individually.

• Suits Graco Silver Plus Gun and Flex Gun
• Includes the necessary Replacement Parts to enable a full repair
• Sold as a Kit
• Manufactured by Bedford Precision Parts

The indentor for the PosiTector BHI Barcol Hardness Impressor is the tip of the probe, used in obtaining the measurements.

A spare indentor and replacement tool are included with each new DeFelsko BHI kit.  This item is a set of 2 tips with tool, and is available separately as a replacement order item.

MPN:  BHIINDENTOR

• High-Pressure Elbow Fitting
• 1/4″ NPTFSW X 1/8″ NPTM
• Steel-plated spray machine accessory

• Suits Airless Paint Equipment up to 5000psi
• Fluid Ball Valve for High Pressure Paint
• ¼” x ¼” Male Threads on both ends
• 5000psi Rated
• Teflon seals are resistant to solvent
• Sold Individually
• Genuine Parts – Manufactured by Graco

Standard Tungsten Carbide (aka TVP) blast nozzles are widely used and are a lower-cost, basic general-purpose nozzle with the following characteristics:

Click for Buying Guide

• Performance characteristics:
  • Venturi design offers up to 40% greater production than straight bore.
• Thread Types:
  • 1-1/4″ NPSM (32mm) brass fine threads
  • 2″ (50mm) aluminum contractor threads
  • Flange type (unthreaded, and attaches to a blast hose with a standard blast hose quick coupling instead of a nozzle holder)
• Orifice Sizes:  
  • Contractor & Fine:  3, 4, 5, 6, 7, 8, 10, 12
  • Flanged:  6, 7, 8, 10, 12
• Liner: 
  • Tungsten Carbide, provides longer life than disposable alternatives for industrial blasting projects
• Jacket:  
  • Contractor and Fine thread versions have poly jacket
  • Flanged type is an all-aluminum jacket
• Design:
  • 1″ (25mm) throat entry for #3 and #4 sizes
  • 1 1/4″ (32mm) throat entry, for all other sizes
• Additional notes:
  • Lowest up-front cost of any industrial blast nozzle.
  • Higher weight and shorter lifespan than premium silicon nitride versions.
  • Lower total cost of ownership, higher performance, and/or improved ease-of-use may be achieved with one of the premium nozzle options.  See You May Also Like below.

• Designed for Industrial Painting Applications
• Designed to be interchangeable with Graco tips and tip-guards.
• Two different guns with pressure ratings of 4200 or 7500 psi
• Has 2 hooks for hanging up or for hanging on a bucket.
• Built-In swivel to optimize ergonomics
• Sold Individually
• Genuine Parts – Manufactured by TriTech USA

• Designed and manufactured to meet the current Spray Booth Standards – AS4114
• Most booths are customised to individual needs
• Wall and overhead lighting is incorporated
• Escape doors, mixing benches and spray painting equipment are all in the design
• Can be either open front or enclosed style booths
• 12 month warranty

• OEM Tritech Repair Kit
• Suits Tritech T750 Spray Gun
• 7/8″ and 11/16″

The GMA GX2 ToughBlast Garnet Abrasive (P-GX2) is a high-performance abrasive designed for challenging industrial maintenance tasks. Offering a high surface profile from 3.0 – 3.75 mil, this abrasive ensures an exceptionally clean surface, perfect for high build coatings. With blasting rates up to 370 ft²/hr and a low to medium dust factor, it’s ideal for rapidly removing heavy coatings and rust, especially in heavy-duty environments like offshore rigs and ship hulls.

• High surface profile from 3.0 – 3.75 mil for optimal coating preparation
• Blasting rates up to 370 ft²/hr for efficient operation
• Consumption rate of 1.5 – 3.0 lb/ft²
• Low to medium dust factor for cleaner work conditions
• Available in mesh sizes 16 and 36
• Packaged in 4400lb bulk bags, sold by the pallet
• MilSpec Approved for top-grade quality

• Ultra flexible – easy to handle
• 200 psi air pressure rated, 85 psi fluid pressure rated
• Color coded Siamese hose
• Solvent compatible fluid hose liner
• Coupled with 3/8″ fluid / ¼” air fittings
• Standard 25 ft or 50 ft lengths
• Hose also available in made-to-order lengths and bulk – Call us!

• Suit TriTech T93R spray tips and guards
• Replacement seals ensure that the gun maintains good pressure and doesn’t drip
• Sold in a pack of 5
• Genuine Product – Manufactured by TriTech USA

GMA GX3 ExtremeBlast Garnet Abrasive is  ideal for surfaces requiring a high profile of 3.5 – 4.5 mil, ensures an exceptionally clean surface for superior bonding of specialist coatings. With blasting rates of up to 280 ft²/hr and a recyclability rating of 4/10, it’s perfect for removing resistant coatings, heavy liners, and marine foulings, especially on high build coatings of 30+ mils.

• High surface profile of 3.5 – 4.5 mil for exceptional coating bonding
• Impressive blasting rates up to 280 ft²/hr
• Consumption rate of 2.5 – 3.5 lb/ft²
• Low to medium dust factor for cleaner operations
• Available in mesh sizes 16 and 36
• Packaged in 4400lb bulk bags, sold by the pallet
• MilSpec Approved for top-grade quality

• Fully compliant with all USA regulations
• Exhausts at a rate of 1.6’/second
• 2 Standard widths – 3′ and 7′
• Uses Andreae filters to capture overspray

• Air inlet: 3/8″ NPT(f)
• Air outlets: (2 regulated) 1/4″ NPT (f) – 1 Each
• 3/8″ NPT(f) – 1 Each
• Air outlets: (2 unregulated) 1/4″ NPT(f) – 2 Each
• Air Capacity: 60 CFM
• Maximum Temp: 150° F
• Max. Inlet Pressure: 150 psi
• Regulator range: 0-125 psi

• Superior quality, lightweight and highly flexible sandblasting hose
• Blast Hoses have anti-static, natural rubber liner
• Rated to minimum 175 psi – 3:1 safety factor
• Robust TuffRap outer blasting hose cover
• Commonly known as whip hose, supa hose or supahose
• Fit with your choice of nozzle holder and couplings
• Please Request Rental Pricing

MOBILE DUST COLLECTOR, AIR SCRUBBERS & PORTABLE DUST EXTRACTORS

• Ready availability all over the US
• Diesel powered
• Trailer mounted or skid mounted
• Industry leading design
• All sizes available
• Read our Dust Collector Buying Guide
• Portable dust extractor for site work
• Onsite dust collectors and onsite dust ventilation
• Industrial portable dust collectors

• Suits RAC 5 or RAC V Spray Tip
• Used to Seal between the Spray Gun and the Tip Orifice
• 4050psi Rated
• Sold as a pack of 5
• Genuine Parts – Manufactured by Graco

GRACO® SPECIAL PURCHASE – ECOQUIP FINAL CLEARANCE!

These hoses and nozzles are top quality new condition, and work on all abrasive blasting equipment (not just EcoQuip).

These special-purchase products include the following:

• EcoQuip “Replacement” blast hose assemblies, which include coupling / nozzle holder, control line, and a Schmidt® Response deadman handle, in both pneumatic and electric.
• EcoQuip “Extension” blast hose assemblies, which include couplings and control line, in both pneumatic and electric.
• EcoQuip “Bulk Hose”, 50′ sections of blast hose, without any accessories
• Graco blast nozzles in the following types:
  • Standard (contractor thread)
  • Hyper (contractor thread)
  • SST (medium thread)
  • Double Venturi (contractor thread)

Note:  The hose assemblies with electric control cable come in both mini and standard connections – see the product descriptions.

This special close-out purchase is limited to stock on hand and will be available on a first-come, first-served basis until they are gone. Pricing shown is the Graco® MSRP.  (See our promotion page for current special offers.)

Easy Tear-away protection for RPB Spray Hood Respirator lenses.

Available options as follows:

• Single Tear-away lenses.  These are the most economical versions for standard industrial coatings applications.  These options comes in the following configurations:
  • Full length for all T-Links and for T200’s with full-length capes.
  • Shorter version designed for the legacy T100 model, but which will work on all RPB spray hoods that do not have the optional in-helmet light.
• Cassette Lens system.  These are premium versions, designed for maximum clarity and convenience.  On time-critical spray projects, cassette lenses save valuable time by eliminating the need to stop and change lenses. These come 7 lenses per set, with 10 sets per pack as follows:
  • Full length for all T-Links and for T200’s with full-length capes.
  • Shorter version for T200’s with face seal or any version not using the optional in-helmet light.

NOTE – the shorter versions will not cover the bottom of the lens area on the T200/T-Link full hoods, and should not be used when the optional light is used on the T-Link.

• Suits Binks 2100 Siphon Spray Gun
• Fluid Nozzle adjusts the flow and spray pattern of the gun
• 65SS, Size 1.6mm
• Sold as a Kit
• Genuine Parts – Manufactured by Binks

• Replacement tip for the ConeBlast Internal Pipe Blasting Tool
• Tungsten carbide composition
• Recommended for short-run projects or projects using less aggressive media types
• If tips with longer life are needed, use the IPC4002H version

• Incorporates Contractor in-line valve and CleanShot shut off valve with RAC X tip and guard
• 3600 psi rated

• Suits Graco Viscon Heater and King Pumps
• Mount Kit for mounting the Heater on a King Pump
• Comes with Hose and Fittings
• Genuine Parts – Manufactured by Graco

• Suit Graco Extreme and Maxlife Lower “Legs”
• Repair Kits include all seals and upper rod and lower balls needed to completely repair
• Extreme Seal has 3x UHMWPE and 2x Leather Seals – Ideal for abrasive applications
• TuffStack PTFE Seals are Carbon filled Teflon – Ideal for chemical resistance and higher temperatures
• Sold Individually
• Geniune Parts – Manufactured by Graco

We have the accessories you need to support your Graco plural spraying equipment. This is the 24W861 remote mix manifold, it is stainless, and it is recommended by EonCoat for their coating systems.

• Used to heat and maintain the temperature of paint to provide a constant viscosity and flow
• Suits Graco Pumps in Hazardous locations
• Electrical Specs 120 VAC, 2300watts, 19.2 amps
• Manufactured with Stainless Steel
• Rated to 7,250 psi
• Can be wall or cart mounted
• Genuine Parts – Manufactured by Graco

• Suits the Devilbiss JGA Standard Spray Gun
• Genuine Devilbiss product
• Tip and Needle only

• Used to heat and maintain the temperature of paint to provide a constant viscosity and flow
• Suits Graco Pumps in Hazardous locations
• Electrical Specs 240 VAC, 4000watts, 16.7 amps
• Manufactured with Stainless Steel
• Rated to 7,250 psi
• Can be wall or cart mounted
• Genuine Parts – Manufactured by Graco

Used between the spray hose and the spray gun, this swivel connection eases movement between them.  

• Can be used with Graco High Pressure Airless Sprayer Paint Hose and Gun – has a 7500 PSI pressure rating
• 1/4″ Male x 1/4″ Female
• Teflon packed for long life, compatible with solvent
• Sold Individually
• Genuine Parts – Manufactured by Graco

• Suit Trelawny 2B and 2BPG Needle Scalers
• Chisel tip for faster working capabilities
• Sold as a Pack of 6 sets of 28x 3mm needles (168 Needles)
• Genuine Parts – Manufactured by Trelawny

• Fast efficient rolling – complete the job in as little as half the time of manual rollers
• No messy paint trays
• No stopping to dip and reload the roller
• GeoSperse 9″ wide roller head (optional EvenFlo Frame) distributes paint evenly across the roller cover for an even consistent finish
• Includes 1/2″ nap roller cover
• 7/8″ nut connects to Graco or Titan airless gun

Please check with BlastOne for EvenFlo Frame product details and part numbers

• GeoSperse roller head
• Optional 9″ EvenFlo roller frame
• Order roller cover separately
• 7/8″ nut connects to Graco or Titan airless gun or airless extension pole
• Unique captive gasket for fast, simple connection
• 5000 psi rated

This lid is included with the Warrior Pail Package, but is not included on the other Warrior packages.

• Lid is designed for a 5 gallon pail and includes bung hole.  It is required when using an agitator.
• Carbon Steel
• Genuine Graco product

Purchase this lit if you have the Cart, Wall, or Stand Mount Warrior package and you want to use an agitator.

$96

Interested in this product?
CALL 1-800-999-1881 or Email

*Do NOT add to cart or quote! Contact Us Directly for more information.

• Suits Binks 2100 Siphon Spray Gun
• Fluid Needle Regulates the flow of paint and size of fan pattern
• Recommend replacement as soon as wear shows
• Size 565
• Sold Individually
• Genuine Parts – Manufactured by Carlisle/Binks

• Suit Trelawny 2B and 2BPG Needle Scalers
• Chisel tip for faster working capabilities
• Sold as a Pack of 6 sets of 19x 3mm needles (114 Needles)
• Genuine Parts – Manufactured by Trelawny

• Extended Life replacement tip for the ConeBlast Internal Pipe Blasting tool
• Boron Carbide composition
• Recommended for longer-run projects or any project using an aggressive media type
• Lower-cost IPC4002 option available if extended life is not required

• Suits Trelawny VL303 ATEX Needle Scalers – Low Vibration HT4463003X
• Manufactured from Spark Resistant Copper Beryllium (CuBe)
• Flat Tip Needle
• Sold  as a kit of 28 Needles
• Genuine Parts – manufactured by Trelawny

• Color coded for easy identification:
  • Grey filter frame #30 mesh
  • Black filter frame #60 mesh
  • Blue filter frame #100 mesh
  • Red filter frame #200 mesh
• Open both ends – can be installed either way
• Suits large EasyOut filters, UltraMax, GMax sprayers
• Sold individually

• Retractable fold away style
• Includes a filter wall and exhaust
• Retracts to 16% of original extended lenght
• Come in a kit form with full instruction manual for easy assembly

• Designed to remove Coating Thickness: 20-50 ml 
• Unique formulation, ideal for blasting marine offshore, oil and gas, shipyards
• Typically used where heavy coatings and rust are existing
• Blend has large particles designed to effectively remove heavy coatings and finer particles to thoroughly clean the pits and surface.
• Expected Profile 2.5 – 4.0 ml
• Abrasive Consumption 2.5 – 5.0 lb/ft²
• Blasting Rates up to 370ft² /hr
• Sold by the pallet (pallet minimum)
• Abrasive cannot be ordered online at this time

• Heavy duty long life pot connector to prevent the top thread of the MicroValve from wearing
• 1 ¼” (31.75 mm) threads both ends

• AirSpray Conventional Pressure Pot, used most commonly for spraying thin coatings
• 2.8 Gallon capacity, allows you to mix up a standard 2 gallon kit of paint with ease
• Single or Dual Regulators availabe
• Agitators – if you are spraying coatings like zinc where it will settle out, you need an agitator kit
• Sold Individually
• Genuine Parts – Manufactured by Binks / Carlisle Fluid Technologies

Upgrade your needle scaler with the Trelawny Copper Beryllium Needles, 3mm, SKU: HT4531310. These spark-resistant, flat tip needles are essential for specialized applications, ensuring safety and efficiency.

• 3mm flat tip design for precision work.
• Made from Copper Beryllium for spark resistance.
• Box contains 100 durable needles.
• MPN: 453.1310.

Ideal for environments where spark prevention is crucial, offering both reliability and performance.

• Suits Graco Ultra Max II Pump Lower
• Repair Kit for lower to extend life
• Complete rebuild kit including 
• Stainless Steel Balls
• Packings
• Orings
• Leather V-Packings 
• and more
• Genuine Parts – Manufactured by Graco

The Auto Air Valve (aka Gatekeeper) is the recommended control valve for a pressure-hold blasting system.  It is safer and superior to a pinch valve system.  Further details as follows:

• Rugged, compact design
• Typically used in conjunction with the Thompson Valve
• Low pressure drop across valve – increases production
• Multiple sizes available.  
• Retrofit systems are available to convert pinch valve / donut valve systems to safer and more efficient Auto Air valve systems – see options below.

AVAILABLE FOR RENTAL OR PURCHASE

• 750 cfm Compressor is suitable for 1-2 blasters
• PSI Range between 125-175 psi
• Each compressor brand is different, so please request a quote.

Enhance your blasting efficiency with the Schmidt® MicroValve Abrasive Metering Valve (SKU: P-GV2125). Designed for precise abrasive flow, this rugged valve ensures optimal sandblasting media use.

• The MicroValve™ changed the industry by providing accurate metering valve
• Simple screw type metering through a low-wearing valve
• 1 ¼” (32 mm) thread abrasive inlet port
• Hardened steel threaded base nipple
• Sold Individually, Brass Coupling not included
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing

This general-purpose nozzle was designed for everyday use, only better – it lasts longer and offers greater ease of use!  It features the following:

Click for Buying Guide

• Performance characteristics:
  • Venturi design provides up to 40% faster production than straight bore versions.
• Thread type & Orifice Size options:
  • Contractor 2″ (50mm)
  • Fine 1-¼” (32mm)
  • Orifice size options:  3, 4, 5, 6, 7, 8
• Liner:
  • Silicon nitride, provides longer life and lighter weight than tungsten carbide.
• Jacket:
  • All-polyurethane – reduces ‘jams’ in metal nozzle holders
  • Shock absorbent, lightweight urethane jacket protects the blast nozzle liner
• Design:
  • 1″ throat entry on #3 and #4 Contractor thread AND all Fine thread options
  • 1-¼” throat entry on #5, 6, 7, and 8 Contractor threads
• Additional notes:
  • Approximately half the weight of standard tungsten carbide nozzles.
  • Although the up-front cost is higher than tungsten carbide, the longer life Ultra-Tuff offers same or better total cost of ownership.

• Conventional bleeder-type deadman control handle
• 1/4″ (6mm) (supply) x 1/8″ (3mm) (return) threaded connectors
• Large lever design
• Use only with equipment designed for bleeder-style handles – DO NOT use with Combo or Thompson Valves

Discover the robust and versatile 5-Gallon Orange Bucket (SKU: HTCP5G), an indispensable tool for professionals and DIY enthusiasts alike. Engineered for durability and functionality, this bucket is a true ally in any setting.

• Lid Included
• Durable Construction: Built to withstand rigorous use in industrial and home environments.
• Eye-Catching Orange: Highly visible for safety and easy location.
• Generous 5-Gallon Capacity: Ample space for various materials, from liquids to solids.
• User-Friendly Design: Ergonomic handle for comfortable transport and use.
• Versatile Use: Ideal for sandblasting, painting, storage, and more.

The PosiTector® interchangeable probe inspection system is the backbone of the DeFelsko instrument collection.  Save time and cost by choosing a pre-configured multi-probe inspection kit.  Details on the most popular inspection kit configurations are as follows:

• Standard Inspection Kits include:
  • Choice of either Standard or Advanced Body. (Compare features on the PosiTector Standard and Advanced Bodies on their separate page.)
  • PosiTector SPG, Surface Profile Gauge
  • PosiTector DPM, Environmental Probe
  • Choice of Coating Thickness Probe:
    • Ferrous or Combination Ferrous / Non-Ferrous
    • Cabled or Integral
    • Standard range (0-60 mils / 0-1500 microns) or Extended range (0-250 mils / 0-6mm).  More details about the PosiTector 6000 coating thickness probes is on their separate page.
• Extreme Inspection Kit includes:
  • Advanced Body
  • PosiTector RTR-H, Testex Replica Tape Reader Probe for Surface Profile
  • Testex X-tra Coarse tape roll
  • PosiTector DPM, Environmental Probe
  • PosiTector DPM-L, Remote Environmental Logger
  • PosiTector FS, Cabled, Ferrous, Standard Range probe
• Also Includes:  In addition to the selected gauge and probes, each kit also includes a carry case, calibration certificate, plastic shims, and more!

For custom configurations, contact us by chat, phone, or email for prompt response.

Poly sheeting is an everyday protective product for painters and other trades.  Key variables / features include:

• Size specifications.  Many sizes and thicknesses are available. If the selection shown doesn’t include what you need, contact us for a quick price and availablity on your preferred version.
• Flammability.  Available in low-cost non-FR or in flame resistant (tested to NFPA701).
• Colors.  Generally stocked in clear (white for FR), it is also available in white, black and yellow.

Chat, phone, or email us for fast response on volume discounts and/or versions not shown in our selection.

Snakebite.  The world’s quietest blast nozzle!

Click for Buying Guide

• Up to 16dBA noise reduction
• Up to 45% less fatigue compared to standard blast nozzles
• Improved nozzle geometry
• New technology quick-connect nozzle silencer
• Durable and lightweight Silicon Nitride nozzle and silencer liner
• Slimline ergonomic nozzle jacket
• Standard contractor nozzle inlet thread
• 2 versions available
  • Standard Pressure Nozzle effective between 90-110 psi
  • Low Pressure (LPS) Nozzle effective between 70-90 psi
• FREE TRIAL AVAILABLE

AVAILABLE FOR RENTAL OR PURCHASE

• LED explosion proof mountable area light
• Kick-it-tough design to outlast brutal onsite treatment from contractors
• Comes with explosion proof cable
• Approved for: Class 1, Div 1 & 2; Groups C & D
• Suitable for wet location use
• LEDs color: ~6000K, CRI >70
• Weight: 10 lbs (light head only)
• Genuine Parts – Manufactured by Western Technology

The Red Rubber Air Hose is a standard duty hose ideal for powering machinery, tools, and air motors, crafted from high-quality EPDM synthetic rubber with a 200psi rating. Available in sizes from 3/16″ to 2″, it’s sold by the foot unfitted and can also be procured in full coils between 200 and 500 feet long, offering versatility and dependability for medium flow air supply needs.

• Standard duty red rubber air hose
• High Quality EPDM Synthetic rubber cover and tube
• 200psi rated
• Ideal for Machinery, tools and air motors
• Not Rated for Breathing air
• Sold by the foot unfitted
• Available in unfitted full coils between 200 and 500 feet long, depending on ID. (Can be up to 3 separate pieces per full coil)
• I.D. Sizes available from 3/16″ to 2″
• Prefitted Chicago hoses available here

Other PSI ratings, prefitted custom lengths, and other colors available – enquire.

• Suits Graco King, Extreme XL, Extreme and Duraflow Heavy Duty Pumps
• Plastic Hopper Kit for gravity feeding material
• For high solids and thick bodied coatings, use a gravity feed hopper to feed the coating into the sprayer
• Kit comes complete with
  • Plastic Hopper
  • Lid to keep out trash and the weather
  • Bracket and mounting pieces for the front of your pump
  • Elbows and connector for lower
  • Everything you need.
• Genuine Parts – Manufactured by Graco

• Ideal for removing coating thickness: 5-15 ml
• Unique formulation, engineered to prepare pipework surfaces for coating
• Typically used in the petroleum and water utility industries
• Blend has large particles designed to effectively remove heavy coatings and finer particles to thoroughly clean the pits and surface.
• Expected Profile 2.5 – 4.0 ml
• Abrasive Consumption 2.5 – 5.0 lb/ft²
• Blasting Rates up to 370ft² /hr
• Sold by the pallet (pallet minimum)
• Abrasive cannot be ordered online at this time

• Coating Thickness Range:  10-50 mil
• Unique formulation, ideal for blasting storage tanks
• Blend has large particles designed to effectively remove heavy coatings and finer particles to thoroughly clean the pits and surface.
• Expected Profile 2.5 – 4.0 mil
• Abrasive Consumption 2.5 – 5.0 lb/ft²
• Blasting Rates up to 370ft² /hr
• Sold by the pallet (pallet minimum)
• Abrasive cannot be ordered online at this time

Offers Quick and Easy Setup for blast cleaning on internals of small pipes

• Blasts in a 360 degree pattern
• Can be used in pipes from 2.5 to 5 inch ID
• Machined aluminum jacket with tungsten carbide liner
• Replaceable tungsten carbide deflector tip
• Coarse, 2″ Contractor Thread
• Screws directly into nozzle holder
• NOTE – requires Nylon nozzle holder with contractor threads

GMA ExtremeBlast 36 Mesh Garnet Abrasive (SKU: P-GM36) is the ultimate solution for removing tough specialist coatings, heavy liners, and marine foulings. This coarse-grade abrasive is perfect for tackling high build coatings of 30+ mils, offering blasting rates of up to 260 ft²/hr. With its uniform surface profile of 3.5 – 4.5 mil and a low to medium dust factor, it achieves an exceptionally clean surface, ensuring strong bonding of specialist coatings. Ideal for critical applications like TSA preparation and extreme condition coatings, this abrasive is a top choice for the removal of high build, pliable, and flexible coatings, including coal tar and marine coatings.

• Coarsest grade garnet for resistant coating removal
• Effective on high build coatings over 30 mils
• Blasting rates up to 260 ft²/hr, creating a 3.5 – 4.5 mil surface profile
• Low to medium dust factor and excellent surface cleanliness for optimal coating adherence
• Efficient consumption rate as low as 2 lb/ft²
• Recyclability rating of 4/10
• Perfect for TSA preparation, extreme condition coatings, and critical component preparation
• Ideal for offshore platform decking, tanks, piping, pressure vessels, ship hulls, and ballast tanks
• Available in 16 and 36 mesh sizes
• Packaged in 55lb bags, and 2200lb & 4400lb bulk bags
• Sold by the pallet for bulk needs

• Suits GVS Integra half-mask w/goggles
• Protects goggles while spraying.  Remove and replace when needed to keep the goggle lens clear.  Save time over cleaning the goggles by hand!
• 10 peel-off visor lenses per pack
• Priced per pack.  5 packs per case.
• Genuine Parts – Manufactured by GVS

• Used for blasting pipe internals with 3″-12″ ID
• Blasts in a 360 degree pattern
• Units come standard with Tungsten Carbide deflector tip
• Select the unit that will best match your Air Supply:
  • IPC4000, 1/2″ Throat Nozzle: 250 cfm
  • IPC4500, 5/8″ Throat Nozzle: 400 cfm
• Order Transport Carriages separately as follows:
  • IPC4100, Collar and Button, for 3″-5″ ID
  • IPC4200, Scissor, for 5″-12″ ID
  • Requires BSP (not NPT) threaded coupling to attached to standard blast hose coupling, part number HFSTC1BSP, available here or under the repair parts tab below.
• Successful Internal Pipe Projects require some specialist knowledge – contact our team for assistance
• Note:  This product is similar to the Clemco Hollo-Blast

Crushed and Glass Bead Blasting Abrasive Media, SKU: P-CG. Perfect for steel profiling, available in various grades & sizes. Not for aluminum/stainless.

• General Purpose abrasive used for Sandblasting
• Angular shape creates a profile on steel
• Not Recommended for blasting on stainless or aluminum
• Comes in many different grades and packaging sizes
• Non-Recycling

• Inlet Strainer
• Inlet Strainer with 1″ thread Stainless Steel Suits Xtreme Pick up tube

• General Purpose abrasive used for Sandblasting
• Angular shape creates a profile on steel
• Mohs Hardness of 6-7
• Bulk Density: 75-100 lbs/ft2
• Less then 0.1% free silica
• Not Recommended for blasting on stainless or aluminum
• Comes in many different grades and packaging sizes
• Non-Recycling
• Meets SSPC-AB 1 Standard
• Sold by the pallet (pallet minimum)
• Abrasive cannot be ordered online at this time

The GMA CLASSIC CUT 80 MESH Garnet Abrasive Media (SKU: P-GANS) is an all-around abrasive ideal for sandblasting new steel and preparing surfaces for coating. This #80 grain size garnet is perfect for achieving a 25-50 micron profile, offering a typical consumption rate of 250 kg/hr and blasting rate of 20 m²/hr. Its pinkish to reddish-brown, sub-rounded grains deliver high performance with low dust, making it an economical choice for both single-use and recycling.

• #80 grain size for efficient sandblasting
• 25-50 micron surface profile ideal for new steel and mill scale removal
• Low dust, high performance garnet abrasive
• Economical with a typical consumption rate of 250 kg/hr
• Blowing rate of up to 20 m²/hr for millscale removal
• Suitable for a variety of industrial applications
• Packaged in convenient bulk sizes

• Suits Graco King, Extreme XL, Extreme and Duraflow Heavy Duty Pumps
• Stainless Paint Hopper Kit for gravity feeding material
• Kit comes complete with
  • Stainless Steel Hopper
  • Lid to keep out trash and the weather
  • Bracket and mounting pieces for the front of your pump
  • Elbows and connector for lower
  • Everything you need.
• Genuine Parts – Manufactured by Graco

• Suits Graco Airpro Spray Gun
• Complete Repair Kit
• Sold as a Kit
• Genuine Parts – Manufactured by Graco

• Suits Graco AirPro Spray Gun Air Valve
• Repair Kit for Air Valve only
• Sold as a Kit
• Genuine Parts – Manufactured by Graco

• Suits Contractor II and FTX Spray Guns
• Complete Repair Kit
• Sold as a Kit
• Genuine Parts – Manufactured by Graco

• Suits 50 gallon and 275 gallon water tanks
• Air Operated, Double Diaphragm, Pneumatic Pump – used to Pump water from a water tank to a MistBlaster
• Allows you to have a mixing tank for HoldTite mixture with water when Mist or Vapor Blasting
• Max Working Pressure 100psi
• Free Flow delivery of 7.0 gallons per minute
• Maximum suction height is 12ft
• Air consumption is only 6scfm
• Pump comes complete with water fittings and air fittings
• Genuine Parts – Manufactured by Graco

This Graco Stainless Steel Air-Driven Agitator features: 

• Manually operated – Compatible with agitator speed controller 
• Pneumatic Rotary Vane type
• Locking bolts to secure cover and reduce spills
• Ideal for wall mount pumps or spray packages
• Compatible with various lid types – a common configuration Graco 5-Gallon Pail Cover Agitator Kit is readily available.

When your RPB coating respirators need refreshed, we have the parts you need.  This group includes the replacement Tyvek® capes/hoods.

• For both T-Link and T200 versions:
  • Tychem® 2000 Full-Length Hood, MPN 17-712
  • Tychem® 4000 Full-Length Hood w/sealed seams, MPN 17-713
  • Tychem® 4000 Extra-Long Hood w/sealed seams, double-bib, and waist straps.  MPN 17-713-SX
• For T200 version only:
  • Tychem® 2000 Face Seal, MPN 17-722
  • Tychem® 2000 Face Seal w/Shoulder-Length hood, MPN 17-732
• For legacy T100 version only:
  • Tychem® 4000 Full-Length Hood w/ sealed seams, MPN 07-150

How do Tychem® 2000 and 4000 materials compare?

• Tychem® 2000 is rated for light liquid splash applications and protects against over 40 chemicals.  This version is most commonly used in industrial painting applications.
• Tychem® 4000 is also rated for light liquid splash applications and protects against over 100 chemicals.  RPB constructs their 4000 hoods with sealed seams for even greater protection.

Note:  Keep your vision clear during coating projects by using an appropriate  RPB Tear-Away Lens System.

• Full Face Mask Respirator for better breathing protection than halfmask
• Solvent resistant visor for easy cleaning
• Peel off visors available
• Comfortable, lightweight and durable mask.
• Low Breathing resistance
• Genuine Parts – Manufactured by 3M Safety

When your G3 Trigger Deadman system needs refreshed, we have the replacement parts you need.  This is the trigger safety flap sub assembly, which includes the spring & pin, and comes 2 per pack.

• Safety flap subassembly requires positive trigger engagement by the operator, thereby preventing accidental blasting
• Heavy-duty construction for long-lasting use
• See the repair parts tab on the main BAABS page here for additional replacement parts.

• Suits Graco Extreme and Maxlife Pump Lowers
• Graco Adaptor Nipple for Xtreme Quick Knockoff
• Connects onto the bottom of the lower for the pick up tube with Quick Knock off fitting to attach to
• Polymer sealing seat has exceptional chemical and solvent resistance
• Sold Individually

• Heavy-Duty Battery Charging Clamps – Bare
• Insulated Vinyl handles for your safety
• 80 Amp capacity, suits 12/24V DC batteries
• 14 to 18 AWG
• Sold as a pair – Black/Red

AVAILABLE FOR RENTAL OR PURCHASE

• Comes in 25 foot lengths
• Built with Heavy Duty Nylon with Extra Wear Strips
• Tough coated membrane wrapping
• Spiral reinforcing ribs for suction applications to ensure the Ducting doesn’t collapse
• Collapses down for compact transportation and storage
• Can be used under negative or positive pressure
• Rated for temperatures from -20 to 180 degrees F
• Meets NFPA701 Method 2 Specs for Flame Resistance

Ensure safety at the forefront of every project with the “Jobsite Safety Sign – Danger Signs for Worksites” (SKU: P-OPS). Designed to alert and warn personnel of potential dangers, this sign is crucial for maintaining a secure environment:

• Perfect for entry-exit points and site perimeters
• Made of robust Colorbond metal for lasting durability
• Dimensions: 24″ x 18″ (600 mm x 450 mm) – ensures high visibility
• Striking colors and lucid messaging (printed on one side) enhance clarity
• Features pre-punched fixing holes for easy installation onto fences or swing stand frames
• Safe design with small rounded corners
• Customize warning texts as per your needs – contact BlastOne for tailored messages

Popular warning options include “Abrasive Blasting In Progress”, “Spray Painting In Progress”, and “Lead Work Area Authorized Personnel Only”. Please note: sign frame sold separately. Discuss your precise requirements with your Area Manager to get the perfect sign for your site.

• Suits Xtreme® 250 Lowers
• Genuine Graco part

• Suits 6″ Filter for Extreme Lower
• Is used inside the lower to ensure the filter mesh doesn’t collapse under suction or pressure
• Support for Long Filters
• Sold Individually
• Genuine Parts – Manufactured by Graco

• 3/8″ NPTM holds 1/2″ 12 element stick
• 7,250 psi rated
• Component of XM/XP Mix Manifold Kit
• Connects to static mixer adapter on the integration hose
• Mixer not included
• Genuine Graco part

• Suits 1″ Xtreme pumps
• Elbow dip tube to suction paint out of 5 gallon containers.
• 18″ long x 1″ Internal Diameter
• Sold Individually
• Genuine Parts – Manufactured by Graco

• Suits 1″ Pick up Tube
• Inlet Strainer has a double fine mesh and coarse mesh to ensure that any trash is stopped from entering the pump
• Made from Stainless Steel
• Sold Individually
• Genuine Parts – Manufactured by Graco

• Suits Warrior Conventional Spray Pump
• Pick up tube and bent tube allows you to suction the coating out of a 5 Gallon Pail
• 3/8″ Internal Diameter
• 3′ hose including pick up tube
• Sold as a hose and Pick up tube Kit

• Suits a Warrior 4000 Sprayer
• Stainless Steel Agitator and connection Kit
• Sold as a Kit which includes
  • Agitator
  • 1ft x 1/4″ poly tube and connections
  • Mounting Collar
  • Does not include the lid (suits Pail Mounted version)  If Lid is needed, see part GR197298.
• This agitator kit works with any of the Warrior 4000 sprayers
• #1 choice for when you are spraying zinc primers

Securely fasten sheeting to scaffolding, add access doors, repair rips, and more with our selection of accessories for containment sheeting. Available accessories include:

• Bungee / toggle cords for scaffold sheeting
• Poly tape for heat-shrink and other applications
• Zipper doors
• Heat Guns for heat shrink sheeting
• Cable ties
• Spray Adhesive
• Containment strapping

If you don’t see what you need, call or chat with your questions. Note:  product brands may vary from what is shown.

The PosiTector® 6000 probe family – DeFelsko’s solution for non-destructive coating thickness measurement on metallic* substrates. This is the most extensive range of instrument probes that DeFelsko offers – many versions available for many different applications. Further details as follows:

• Familiar.  These interchangeable probes are compatible with the tried-and true DeFelsko Standard and Advanced Gauge Bodies.  In addition, all current versions can also be paired with the PosiTector SmartLink / mobile app platform. (Compatibility chart available under the document tab to confirm compatibility on older gages.)
• Versatile.  Checks coating thickness in many applications, including:
  • Single-handed use (integral probes)
  • Cabled probes in various lengths
  • Hot / Rugged applications
  • Very thin to very thick coatings
  • and more!

This page shows probes only.  Package options including DeFelsko 6000 Standard Gages and DeFelsko 6000 Advanced Bodies are shown on their separate pages. Probes – not the Gage / Bodies – are factory calibrated and each new probe comes with a Certificate of Calibration.  For field calibration checks, certified or non-certified standards are available separately (see You May Also Like below.)  Contact us for information on probe repairs or probe re-certifications. *The DeFelsko PosiTector 200 is available for measuring coating thickness on non-metallic substrates.

AVAILABLE FOR RENTAL OR PURCHASE

• 1600 cfm Compressor is suitable for 4 blasters
• PSI Range between 150-200psi
• Each compressor brand is different, so please request a quote.

Many time-saving Vac Hose Fittings are available.  This group includes:

• Vac Hose Wyes, join 2 smaller hoses to 1 larger hose
• Vac Hose Splitters, join 3 or 4 smaller hoses to 1 larger hose
• Easy to install and remove for hassle-free maintenance
• Made from durable carbon steel

Contact us for additional sizes / options

The T-Link Respirator is a robust and highly flexible solution for industrial painters, designed with safety in mind. The T-Link is one of the GVS / RPB family of loose-fitting respirators designed especially for coating applications.  These offer the following advantages over traditional close-fitting masks:

• Safer.  Much more protection from respiratory hazards, with an Assigned Protection Factor of 1000+, due to its positive pressure design. (The typical N95 masks rating is only 10)
• More User-Friendly.  Facial hair is OK – no need to be clean shaven.
• Saves time and money.  The hassles and expense of annual fit-testing are eliminated.
• More comfortable.  Several ventilation options available to keep operators productive during temperature extremes.

These RPB respirators are truly an investment in your people and are expected to improve employee retention. Configure your T-Link to meet your specific needs, as follows:

• Ventilation system choices:
  • Supplied Air / Constant Flow valve
  • Supplied Air / C40 Heat/Cool climate control
  • PAPR / PX5
  • PAPR / HX5
• Head suspension choices:
  • Bump Cap
  • Hard Hat
• Cape choices:
  • Tychem 2000 Full Hood
  • Tychem 4000 Full Hood w/Sealed Seams

In addition, T-Link respirators have optional performance-enhancing accessories available, as follows:

• Comms-Link™ In-Helmet Communication systems, which pair with your existing 2-way radios.
• Vision-Link™ In-Helmet Light, providing 650 lumens to help your operators do their best work.
• Quiet-Link™ Ear Muffs, in-helmet hearing protection – eliminates the concern about ear-plug compliance.
• Tear-Away (Peel-Off) lenses, both in economical singles and convenient cassette styles.

The T-Link from GVS / RPB is to painters what the Nova respirators are to blasters.  Not sure?  Contact us to discuss a trial.

• 30 Day Money Back Guarantee | Free Returns
• For use with Bristle Blasters
• Used to increase velocity of bristle movement
• Sold in packs of 5 bars
• Available in standard Carbon Steel or in Stainless
• Genuine part – manufactured by MontiPower

• Vacuum Powered Steel Grit Recycler designed for onsite clean up and recycling
• Capacity up to 50 tons per hour of steel grit
• Skid Mounted, can be used in portable and fixed installations
• Integrated vacuum recovery for clean up and automatic abrasive cleaning tower
• Recycled abrasive is deposited directly back into your abrasive storage hopper
• (2) High-capacity 6” vacuum inlets for entry of recovered abrasive with 8” connection ports to vacuums
• Adjustable magnetic drum separator for fine tuning of abrasive size

IN-STOCK READY TO SHIP

The patented ingenious Bristle Blaster belt design with its angled ends is key to this tools remarkable surface preparation abilities.

• They are available in general-purpose Carbon Steel and also in Stainless Steel for stainless or aluminum applications.
• Bristle Blaster belts / wheels are available in 11mm and 23mm widths, and are packaged as follows:
  • 11mm in 50 per box
  • 23mm in 100 or 180 per case
• Belt life varies depending on conditions, but is typically around 25 minutes.

Genuine MontiPower product!

• Energy-efficient 20W bulb
• Specifically designed for the 3070 Brite-Blast Blast Light
• Provides bright and clear illumination
• Long-lasting and durable construction
• Easy to install and replace

• Suits Mist Blaster Blast Machine and other Blast Machines
• 1-1/2” Hi-Flow Inlet Air Pressure Regulator
• Has a ‘T’ handle for easy adjusting with a locking nut to ensure the gauge doesn’t change once set
• Rated to regulate up to 300 PSI

Refresh your 3″ / 75mm hose / plastic pipe cutter with a new blade, available here from Blastone.

Ideal for:

• Removing surface rust
• Prep on lashing points
• Grinding weld seams
• Painting preparation
• Removing surface rust
• Ship deck paint removal

The PosiTector® SPG – DeFelsko’s solution for measuring surface profiles on both metal and concrete surfaces – without the need of Testex® tape.  This inspection instrument system is capable and configurable, and has the following highlights:

• Familiar.  Built on the tried-and-true PosiTector gauge / body platform, using interchangeable probes.
• Capable.  Five separate probe designs available as follows:
  • PRBSPG.  Integral probe for one-handed use. Measures flat blasted steel.
  • PRBSPGS.  Cabled probe for enhanced ergonomics and/or access to hard-to-reach areas. Measures flat blasted steel.
  • PRBSPGOS.  Cabled probe for use on convex curved blasted steel (especially pipes).
  • PRBSPGCS.  Cabled probe for measuring textured coatings and other surface profile applications.
  • PRBSPGTS.  Cabled probe for measuring concrete profile.
• Configurable.  Available as follows:
  • Probe only.  Use with your existing PosiTector gauge.
  • Standard PosiTector body package with choice of probe.
  • Advanced PosiTector body package with choice of probe.
  • Note:  All PosiTector SPG packages come with case, zero plate / shim, calibration certificate, and more.

Specifications and features of the PosiTector® Standard and Advanced Gauge / Bodies can be compared on their separate web page.

BlastOne offers all accessories and replacement parts for DeFelsko testing instruments.

As part of the PosiTector SST test process, water from the test must be injected into the probe for salt measurements.  These foam swabs are used between measurements to clean the probe and are available in this convenient package of 5 units.

MPN:  SSTSWAB

• Suits Graco King, Xtreme and most Airless Spray Pumps
• Designed to be mounted on an Airless Sprayer between the incoming air and the air regulator
• Lubricates the incoming air to extend the life of the air motor
• Sold as a Kit which includes;
  • The Lubricator
  • Adaptor Pieces to match the air regulator
  • Pins, O-Ring and Elbow fitting
• Genuine Parts – Manufactured by Graco

• Suits all Paint Spray Pumps
• Specially formatted to dissolve material on displacement rods
• Throat Seal Liquid (TSL)
• Sold by the bottle 1 Quart
• Extends component life
• Check the pump throat and top up the liquid daily
• Prevents paint drying on the displacement rod and packings
• Genuine Parts – Manufactured by Graco

Heavy duty personnel lift for use in a variety of applications by typically for paint.  Greatly improves safety and accessibility, meaning you can get painting or preparation jobs done quicker, safer, and allow greater throughput as well.

• Blastox® is a patented formula designed by TDJ to be mixed with Coal or Copper Slag to be used in Lead Abatement Projects
• Allows a One Step process, the formula is mixed with the abrasive and when collected it stabilizes heavy metals to render them as a non-hazardous waste.
• Passes TCLP, MEP, SPLP and Fresh Water Leach Tests.
• Stabilizes heavy metals like lead paint by ph adjustment, chemical reactions and encapsulation.
• Sold by the pallet (pallet minimum)
• Abrasive cannot be ordered online at this time

• Suits Graco King and Xtreme Airless Sprayers
• Xtreme Pump Suction hose only
• 1″ (25 mm) internal diameter
• 6′ (1.8 m) suction hose with male pipe thread on one end for the suction tube (use GR 197682 – not included)
• Quick Knockoff coupling for connection to the pump lower
• Does not include the bent pick up tube or connectors
• Genuine Parts – Manufactured by Graco

The Bullard 20TIC Hood is specifically designed for use with hard hats, airline systems, or Powered Air Purifying Respirator (PAPR) blower assemblies. Crafted from Tychem QC for robust splash protection against a spectrum of chemical agents, this hood is ideal for applications in chemical/pesticide handling, spray painting/coating, and nuclear operations. Featuring a wide-angle lens for unparalleled visibility, a patented inflatable neck cuff for enhanced comfort and protection, and NIOSH certification, this durable yet economical hood meets the rigorous demands of industrial environments.

• Compatible with hard hats, PAPR, or Supplied Air Respiratory Systems
• Made from Tychem QC for superior chemical splash protection
• Wide-angle lens for industry-leading visibility
• Patented inflatable neck cuff design for comfort and airflow
• Reusable yet economical for varied application needs
• NIOSH certified for safety and reliability

• Suits Trelawny TFP200 Deck Scaler Drum (HT320002H)
• Genuine part – manufactured by Trelawny
• Available Cutters:
  • 5-Tip Tungsten Carbide Cutters – Pack of 80
  • Tungsten Carbide Spacers – Pack of 88
  • Star Cutters – pack of 208
  • Beam Cutters – pack of 264
• Sold individually

• Pneumatically operated scaling hammer with 11 working pistons
• Ideal for removing tough materials on ship decks before abrasive blasting
• Floating head design to glide across uneven surfaces
• Equipped with 11 Carbide-tipped heads
• Sold as a complete kit, ready to work
• Genuine Products – Manufactured by Trelawny

• Suits Panther Spray Paint Low Pressure Hose
• Rated to max working pressure of 100psi
• 2-piece reusable coupling
• Has a swivel nut connector for ease of installation
• Sold Individually

Industrial Electric Needle Scaler has the following specifications:

• 115v / 300w / 2.8 amps
• Standard needles with machine are 15 pieces of 3mm x 7 inches
• Optional needles are 32 pieces of 2mm x 7 inches
• Standard needles are carbon steel.  Optional non-sparking beryllium/copper or stainless steel needles are available.
• Adjustable front handle for operator convenience
• includes 6mm Allen wrench

Top choice for jobs requiring 100% containment, such as lead remediation, etc.

• Coated 420 denier nylon material (6 oz/yd) or commonly called poly
• Normally sold with FR treatment. Non-FR available by special order at a 10% savings – call for lead times.
• Standard construction includes sewn grommets positioned at 2 foot intervals along the web-reinforced seams, hems, and overlap flaps.
• The second dimension on the tarp size is always the length of the interior seams.

Contact us for rush requirements, volume pricing, and custom material / size requests.

The “Standard Claw and Bore Metal Coupling Gaskets MRL” (SKU: HFGMRLP) is a durable replacement gasket, designed for standard metallic claw couplings. Sold in packs of 10, suitable for systems blasting over 80psi.

• 30 Day Money Back Guarantee | Free Returns
• Suits Standard Aluminum and Brass Blast Hose Couplings
• Single Lipped MRL Rubber
• 1-¼ (32mm) Bore Size
• Work great with blasting systems that blast at pressure over 80psi
• Sold as a pack of 10

High Pressure Version is available which lasts longer and withstands higher pressures – HFGMRHP

Camlock fittings allow quicker connections between sections of vacuum hose.  Faster & easier than using tape.

• This group is Type E version, with male hose barb and male connection
• Connect same size hoses or adapt different sizes together
• Save time and use Quick Disconnect (QD) fittings
• Economical Aluminum shown
• Other materials are available – inquire.

Contact us for additional sizes / options.

Elevate your production blasting with the Schmidt® AirPrep Deliquescent Desiccant Air Dryer, an industry-standard moisture removal system that uses Deliquescent tablets to absorb moisture for cooler, drier blasting. Experience enhanced efficiency, including 15% faster blasting, while saving on abrasive costs, all achieved through this rugged, skid-mounted system. Tailored to your needs with a range of sizes based on your compressor’s CFM, this galvanized desiccant tank ensures easy maintenance and longevity, promising optimal performance even in high humidity environments and temperature fluctuations.

• The Premium Industry Standard Air Dryer
• Uses Deliquescent tablets to absorb moisture from the blasting air
• Pneumatic Fan motor with Easy Maintenance
• Galvanized Desiccant Tank lasts 5x longer then all competition
• Select size based on the CFM of your compressor
• Come fitted with 4-claw fittings
• 5 year warranty
• Genuine Products – Manufactured by Schmidt® / Axxiom Manufacturing
• ACSD250 / ADS250, ACSD400 / ADS400, ACSD750 / ADS750, ACSD950 / ADS950, ACSD1200  / ADS1200, ACSD1600 / ADS1600

Wall-Man XL personnel lift is a pneumatic lift, suited for paint booths, that can reach extreme heights and features a larger working platform suited for multiple operators.

• Suits Binks 2.8 gal Pressure Pot
• Lid Gasket for sealing the lid of the pressure pot to the pot
• Replace at the first sign of any cracks of wear
• Sold Individually

• Corn Cob abrasive is ideal for deburring and polishing.
• Used to remove mold, smoke and fire damage
• Can be used on operating machinery, will not damage glass or rubber.
• Natural, Non-sparking abrasive
• Sold by the pallet (pallet minimum)
• Abrasive cannot be ordered online at this time

• 30 Day Money Back Guarantee  |  Free Returns
• Industry standard coupling for use with air supply hose
• Rugged steel construction
• Quarter-turn quick action connector
• Supplied with 3/4″ I.D. bore gaskets fitted
• Use HF CLP-1 or HF CLP-2 Lock Pin – (not included)
• Available with hose tail, male threads, or female threads
• Sold individually

• 1-1/4″ x 1-1/4″ FNPT Threads, with half-round handle – fits most blast pots
• Incorporates ball valve and union connection
• Reduces maintenance time – allows the metering valve to be removed without emptying the pot
• Can be used independently, or in conjunction with a Tri-Clover Quick connector. To order this combination as a unit, use part number GV2410320SPBV (saves cost).
• Use thread sealant tape or compound to ensure an airtight connection
• NOTE – this option adds about 3 inches to the height of the valve – ensure that you have sufficient clearance before ordering.

• Conventional, bleeder-style handle – do not use with Combo or Thompson valves
• RCC Aluminum “Bleeder” pneumatic remote control handle
• Large-lever design
• ¼” (6 mm) (supply) x ⅛” (3 mm) (return) threaded connectors
• Recommended upgrade to a non-breather deadman handle
• Genuine Parts – Manufactured by Clemco

• Scaling hammers are used for Removal of:
  • Hard coating
  • High Build ups
  • Corrosion
• Use with Trelawny TVS Vacuum.
• Available as various options: 
  • SF1 Single Head
    • Cruciform
    • Single Piece Steel Piston
  • SF1 VL Single Head (Low Vibration)
    • Cruciform
  • SF3 Triple Head
    • Cruciform
    • Beryllium Copper Cruciform
    • Single Piece Steel Piston
  • VLSF1-EX Single Head (Low Vibration and ATEX)
    • Beryllium Copper Taper Fit
  • SF3-EX Triple Head (ATEX)
    • Beryllium Copper Taper Fit
• Genuine Products – Manufactured by Trelawny

• Suited to coat pipe internals 12″ – 35″ (300mm – 875mm)
• 3,600 psi rated
• At least a 30:1 airless sprayer should be used – ideally a 40:1 system
• Systems are sold bare – hose and controls purchased separately

• Suited for use on pipes 3″ – 5″ (75mm – 125mm)
• 3,600psi rated
• At least a 30:1 airless sprayer should be used – ideally a 40:1 system
• Systems sold bare – hose and gun ordered separately

• Suits 4″ (100 mm) wide Nook and Cranny rollers
• Fabric roller covers
• Come in packs of 10 rollers

For protection against hazardous dusts and particulates, the 3M™ Disposable Protective Coveralls 4545 offer the quality and long-lasting comfort your workers value when working in challenging conditions

• Microporous PE laminate construction for Type 5 and Type 6 protection
• Anti-static treatment reduces static build up
• Reinforced gusset translates to increased durability while bending and squatting
• Knit cuffs provide increased comfort versus elastic closures
• 20 units included in each case

Quickly and easily detect air and water leaks in bulding envelopes and rigid air barrier systems.  Ideal for testing penetrations (fasteners, masonry ties, etc.) and continuity of joints and seams in rigid air barrier systems.

DeFelsko MPN:  AIR

Enhance your blasting operations with the Squat Aftercooler AirDryer System, a compact, industry-standard moisture removal solution designed to increase blasting speed by up to 15%. Leveraging an Aftercooler design for optimum cooling, this system effectively removes moisture, saving on abrasive costs, and comes in sizes tailored to your compressor capacity. Rugged, portable, and equipped with a stainless steel demister pad for effective moisture removal, the Squat Aftercooler AirDryer System is built for high performance in high humidity and varied temperature environments.

• The Industry Standard AirDryer
• Squat Compact Design
• Uses Aftercooler design to cool the air for maximum moisture removal
• Pneumatic Fan motor
• Easy Maintenance
• Size based on the size of your compressor
• ACS250Squat – Rated to 250 cfm (good for 1x #6 blast nozzle)
• ACS400Squat – Rated to 400 cfm (good for 1x #7 blast nozzles
• ACS750Squat – Rated to 750 cfm (good for 2 blasters)
• ACS950Squat – Rated to 950 cfm (good for 2 blasters or occasionally 3)
• This unit will perform best when used in climates where the ambient temperature is above 50°F. Not recommended for use in climates that freeze. Recommend P-ACSD.

BlastOne offers all DeFelsko instruments, accessories, and consumables with easy, on-line ordering capability.

This PosiTest® DFT series is a lower-cost design, which provides basic coating thickness measurements for most coatings, but without the memory, connectivity, and other features of the premium PosiTector 6000 series.  Information specific to these PosiTest® Dry Film Thickness gauges is as follows:

• Design:
  • Dedicated and simple, this unit only measures DFT for non-magnetic coatings, without frills and economically.
  • Simple on-board icon-based menu.
• Configurations:
  • Ferrous substrates (only) model (MPN: DFTF)
  • Ferrous / non-ferrous substrates model (MPN: DFTC)
  • Both gages come as a kit with a case, precision plastic shims, Calibration Certificate, and more.

Additional information available under the Description tab.

BlastOne offers a selection of popular replacement Filter Cartridges for most dust collectors.  Additional details as follows:

• Suits Mobile Dust Collector Units, Blast Room Dust Collectors and Cabinet Dust Collectors
• Multiple media types available
  • 80/20 cellulose/poly.   (aka Cellulex®).  General purpose application. Merv 10 rated.
  • 80/20 treated cellulose/poly. (aka Endura-Tek™). General purpose filtration with increased resistance to moist air.  Merv 10.
  • Nano.  (aka UltraWeb).  Used when extra filtration efficiency is required – often in hazardous dust applications such as lead or asbestos.  Also offers longer life and lower energy requirements. Merv 15.
  • Spunbond UltraWeb.  Similar to standard Nano with increased resistance to moist air.  Merv 15.
  • All are available in standard or FR rating.  (Call or chat for pricing on FR versions)

Many more cartridge filter types available – see cross reference chart under the Documents tab.  If you don’t see what you need, chat or call 1-800-999-1881 with your questions. 

Note:  Brand of product may vary.

The PosiTector® 6000 probe & advanced gage / body kit family – DeFelsko’s premium solution for non-destructive coating thickness measurement on metallic* substrates. The PosiTector 6000 series is the most extensive range of instrument probes that DeFelsko offers – many versions available for many different applications. Further details as follows:

• Familiar.  The PosiTector Gauge / Body is the tried-and-true platform offering interchangeability with most DeFelsko probes.
• Versatile.  Checks coating thickness in many applications, including:
  • Single-handed use (integral probes)
  • Cabled probes in various lengths
  • Hot / Rugged applications
  • Very thin to very thick coatings
  • and more!

This page shows Kit / Packages for the Advanced Body with your choice of PosiTector 6000 probe.  (Compare the features of the PosiTector Standard and Advanced Gauges on their separate page.) Other configurations (PosiTector 6000 Probe-only, PosiTector Gage/Body-only and PosiTector Standard Body / Probe packages) are shown on their separate pages.

Probes – not the Gage / Bodies – are factory calibrated and each new probe comes with a Certificate of Calibration.  For field calibration checks, certified or non-certified standards are available separately (see You May Also Like below.)  Contact us for information on probe repairs or probe re-certifications.

*The DeFelsko PosiTector 200 is available for measuring coating thickness on non-metallic substrates.

• FREE Shipping
• 30 Day Money Back Guarantee | Free Returns
• Xtreme Lower Long Filter Screen
• Long Filter Screen #60 mesh (pkt 25)
• Mesh: #60 (6″)

The PosiTector® 6000 probe & standard gage / body kit family – DeFelsko’s basic solution for non-destructive coating thickness measurement on metallic* substrates. The PosiTector 6000 series is the most extensive range of instrument probes that DeFelsko offers – many versions available for many different applications. Further details as follows:

• Familiar.  The PosiTector Gauge / Body is the tried-and-true platform offering interchangeability with most DeFelsko probes.
• Versatile.  Checks coating thickness in many applications, including:
  • Single-handed use (integral probes)
  • Cabled probes in various lengths
  • Hot / Rugged applications
  • Very thin to very thick coatings
  • and more!

This page shows Kit / Packages for the Standard Body with your choice of PosiTector 6000 probe.  (Compare the features of the PosiTector Standard and Advanced Body on their separate page.) Other configurations (Probe-only, Body-only and Advanced Body / Probe kits are shown on their separate pages.

Probes – not the Gage / Bodies – are factory calibrated and each new probe comes with a Certificate of Calibration.  For field calibration checks, certified or non-certified standards are available separately (see You May Also Like below.)  Contact us for information on probe repairs or probe re-certifications.

*The DeFelsko PosiTector 200 is available for measuring coating thickness on non-metallic substrates.

Maximize your blasting efficiency with Schmidt® AirPrep™ Aftercooler Moisture Removal Systems, engineered for superior performance even in high humidity environments or critical applications. Utilizing an over-sized radiator for optimal flow and cooling, this rugged system features a stainless steel coalescing demister pad, ensuring non-restrictive, effective moisture removal, and requiring no replacement elements. Built to last, the Schmidt® AirPrep™ enhances production by allowing up to 15% faster blasting and reducing abrasive expenditure, thanks to its negligible pressure loss design and efficient moisture elimination.

FOR RENTAL OR PURCHASE

• The Premium Industry Standard AirDryer
• Uses Aftercooler design to cool the air for maximum moisture removal
• Removes 90% of the moisture in the blasting air
• Pneumatic Fan motor mean you don’t need electricity to run this onsite
• Size based on the size of your compressor
• Suitable for warm weather or indoor use
• Genuine Schmidt® Products – Guaranteed to Perform!

The Bresle method of testing surfaces for salt contamination is recognized by ISO and ASTM standards.  The DeFelsko SST test probe is an easy and accurate way to conduct these tests.  Test patches are required to perform them and DeFelsko has multiple options, as follows:

• PosiPatch™.  This innovative product utilizes a reusable patch, held by a magnetic ring against the surface.  Available in 2 configurations:
  • Rigid ring.  Preferred for flat surfaces or round surfaces with greater than 40 inch diameter.
  • Flexible ring.  Preferred for round surfaces between 4 and 40 inch OD, or a minimum of 4.5 inches ID.
  • Saves time and money vs. disposable patches.
  • Utilizes a plastic needle – no sharp hypodermic needles required!
• Latex Disposable.  The conventional Latex Adhesive Bresle Method Patch has a sample test volume range of up to 15 ml (the only DeFelsko version with this range) for applications where the spec requires this.
• Latex-Free Disposable.  Similar to latex disposables but lower in cost, the DeFelsko Adhesive Bresle Method Patch is suitable when the 15 ml sample size of the latex version is not required.

Note:  Both disposable options from DeFelsko feature low-tack adhesive with TearGuard™ technology for easy patch removal.  No residue to clean from the surface when using any DeFelsko SST test patch option!

Heavy Duty Blast Room can be designed for use with any steel or heavy machinery manufacturers, refinishing facilities, for oil and gas components, or in job shops. 

The “General Purpose Custom Engineered Blast Rooms and Facilities” (SKU: SBMGS) are heavy-duty, long-term sandblasting solutions. Designed for diverse industrial needs, these rooms feature robust steel panels, advanced abrasive recovery systems, and extensive customizability. Ideal for consistent operations seeking a controlled blasting environment.

• Heavy-duty coating unit
• Ideal for use on 3″-5″ (75mm-125mm) pipe internals
• Centering carriage, spray tip and shut-off valve included
• Pressured rated = 3,600psi
• Fastens directly to high-pressure (HP) airless spray pump

AVAILABLE FOR RENTAL OR PURCHASE 

The “Twin line Deadman Control Hose” (SKU: AHRMS4055) offers a safe, heavy-duty solution for pneumatic deadman controls. Bonded and color-coded for enhanced safety, it is available for rental or purchase.

• Bonded, heavy duty, twin rubber hose, color coded for safety
• Used to supply air to the deadman handle which is used to signal a “blast” return charge of air to the blast pot control valves
• Always replace the hose at the first sign of wear, this is a safety deadman control item.
• Fitted standard with male-female threaded connectors
• 1/4″ (6 mm) connectors on ‘supply’ red hose
• 1/8″ (3 mm) connectors on ‘return’ green hose
• 55 ft length
• Please Request Rental Pricing

• ConeSpray with Carriage – for 5″-10″ (125mm – 250mm) ID pipe
• “Hollow cone’ spray pattern
• Includes spray tip, shut-off valve, centering carriage
• 3,600psi pressure rating
• Connects to high-pressure airless sprayer pump – not included
• Not suited to spray UHS (Ultra High Solids) paints

• Suits Graco Xtreme and MaxLife Lowers
• Used to filter out any unwanted particles from your paint, so they don’t end up in your gun, blocking your spray tip
• Filter Element is 6” Long and about 1″ round
• Use with a Filter Support which is inserted into the middle of the Filter
• #60 mesh
• Sold as a Packet of 2
• Manufactured by Bedford Precision Parts

• Suits Graco Xtreme and MaxLife Lowers
• Used to filter out any unwanted particles from your paint, so they don’t end up in your gun, blocking your spray tip
• Filter Element is 6” Long and about 1″ round
• Use with a Filter Support which is inserted into the middle of the Filter
• #100 mesh
• Sold as a Packet of 2
• Manufactured by Bedford Precision Parts

• Suits Graco Xtreme and MaxLife Lowers
• Used to filter out any unwanted particles from your paint, so they don’t end up in your gun, blocking your spray tip
• Filter Element is 6” Long and about 1″ round
• Use with a Filter Support which is inserted into the middle of the Filter
• #30 mesh
• Sold as a Packet of 2
• Manufactured by Bedford Precision Parts

Easily double the capability of your Warrior (aka Triton 308) conventional spray pump by adding this valve kit. Includes all necessary fittings.

Kit does not include spray line or gun for the second operator. See here for available gun options.

See here for available spray/air line options.

• Suits the Trelawny TFP200 Deck Scaler
• This replacement twisted knot wire brush is heavy duty
• Used for removal of surface rust and feathering of intact coatings
• Sold Individually
• Genuine Parts – Manufactured by Trelawny

AVAILABLE FOR RENTAL OR PURCHASE

• Abrasion-resistant, flex-coated control cable
• 12 Volt rated for electric deadman controls
• 3-Pin Twistlock connectors used for all deadman cables
• 2-wire is used for Battery connections only
• Optional heavy duty cable for use with steel grit or other high wear areas
• Please Request Rental Pricing

• FREE Shipping
• 30 Day Money-Back Guarantee | Free Returns
• Improves safety when loading abrasive into Mega Blaster
• Heavy-duty steel cage prevents possibility of bulk bag dropping while loading
• Designed for Schmidt 160 C.F. pot.  Other configurations available – enquire.

• High speed blending of two-pack coatings
• Will result in the highest component consistency
• 3/4″ drill chuck
• Suits 5 – 16 gallon mixer
• 1 HP
• Heavy Duty
• 1,000 rpm

Wall mounted personnel lift, for use in blast rooms. Capable of 3-axis travel, utilizes heavy-duty design to operate in harsh blasting environments.

The GX4 is a smart, sophisticated gas monitor designed to keep your employees safe and your company compliant with breathing air safety standards.  Features as follows:

• Capable.  Monitors up to 4 gases simultaneously, including CO (carbon monoxide), O2 (oxygen), and HS2 (hydrogen sulfide) using the GVS Cartridge Sensors.  
  • Note:  Unit comes standard with the CO cartridge only. Cartridges never need calibrating and last up to 2 years.  Regular calibration checks to be performed by using the GVS / RPB GX4 Calibration Regulator Kit.
• Intelligent. Continuously logs real-time data such as gas concentration, air temperature, unit status, etc.
• Connected.  Utilize access to your company’s network or connect directly with your device using the built-in Wi-Fi Hotspot mode.
• Flexible.  Powered by either a 12 volt vehicle battery clips (using cable with battery clips) or by a rechargeable Lithium battery. 
• Safe.  Built-in 103db alarm demands attention when unit detects the contaminants above the programmed levels.  For the ultimate in safety, choose the version with RZ fittings.  The RZ fittings are designed to work only with GVS / RPB breathing air equipment and cannot be accidentally connected to shop nitrogen lines.  Note:  Using RZ fittings will require use of breathing air line and respirators with these fittings as well.
• Customizeable.  The following options are available:
  • GX4 Heavy Duty Field Case – protects your investment when your projects are remote.
  • GX4 Auxiliary Strobe Light / Alarm / Cable
• Can be surface or wall-mounted using the GX4® wall bracket – or mounted directly to an RPB® Radex Airline Filter.
• Genuine Product – Manufactured by GVS/RPB® and NIOSH approved with the Radex Breathing Air filter.

 AVAILABLE FOR RENTAL OR PURCHASE

Connect up to 4 Western Technology 3475 LED Blast Lights (equipped with 3115 mini twist-lock plugs) into a single transformer

• High-quality construction for durability
• Has 6′ heavy-duty 14 AWG standard plug for the 110v side and (4) 1′ cables with 3116 mini twist lock female sockets for the light side.
• Genuine Western Technology Parts – MPN 3475LEDPP4

BlastOne offers all instruments and accessories from the DeFelsko range on-line, for easy ordering, access to operational manuals, and more.

Inspection instruments are an investment worth protecting and DeFelsko has a range of protective cases available, as follows:

• The PosiTector Case.  Sturdy hardshell design designed to carry a PosiTector gage / body and multiple probes.  Space for manuals, calibration certificates, and more.  MPN: CASEINSP
• The Pelican Standard Inspection Kit Case.  Lightweight, watertight, and crushproof, this case securely stores a PosiTector Gage and 3+ PosiTector probes with customized foam inserts.  13.4″ x 11.6″ x 6″.  The MPN is CASEINSP-P.
• The Pelican Large Inspection Kit Case.  Like the smaller Standard version above, this unit is lightweight, watertight, and crushproof but is larger to accommodate 5+ probes as well as SST Soluble Salt Tester accessories.  18.2″ x 13.4″ x 6.7″ .  The MPN is CASEINSPL-P.
• The Pelican Adhesion Tester Case.  Heavy duty, waterproof construction features customized foam inserts for the PosiTest AT-A automatic tester.  18.2″ x 13.4″ x 6.7″.  The MPN is CASEATAB-P.

Heavy-duty pipe fitting connects flat sand valve to pusher line, blast hose line, and blast pot nipple.  Specifications:

• 150# malleable iron wye
• 1-¼” x 1-¼” x 1-¼” standard NPT female threads

This common wear item is also available with rubber lining to extend life – see You May Also Like below.

• Suits Graco King Xtreme and Maxlife Lowers
• Connects to the bottom of the lower to siphon coatings out of a 5 gallon pail
• Kit includes Large elbow from the bottom of the pump, 6′ x 1″ suction hose, bent pick-up tube and all the connectors to make it happen
• Sold as a kit
• Genuine Parts – Manufactured by Graco

• MegaFlow heavy duty air supply bull hose
• Used to supply the large volume of air required for sandblasting
• Made from high-quality rubber compounds that are oil resistant
• Tough, UV resistant outer cover resists breakdown from sunlight
• Nylon braiding to make it more flexible and easier to man-handle
• Rated to 300psi with 3:1 safety factor
• Fitted Bull Air Hoses also available

The Tigerflex Vacuum Hose UF1, manufactured by Kuriyama, offers superior abrasion resistance, making it an ideal choice for moving large quantities of abrasive blast media. Available in multiple sizes and featuring anti-static properties, a counter-clockwise spiral helix, and crush-resistant properties, this heavy-duty vacuum hose delivers optimal performance, regardless of the type of abrasive blast media used. 

AVAILABLE FOR RENTAL OR PURCHASE

• Has anti-static properties to reduce static shock to the operators
• Counter-clockwise spiral helix
• Special rubber compounds ensure high levels of abrasion resistance
• UF1 Vacuum hose is suitable for recovering and moving large quantities of abrasive blast media
• Available in multiple sizes
• Genuine Product – manufactured by Kuriyama

AVAILABLE FOR RENTAL OR PURCHASE

• MegaFlow heavy duty air supply bull hose
• Fitted with your choice of industrial fittings
• Fitted by Trained and Certified BlastOne Technicians
• Rated to 300psi with 3:1 safety factor
• Always use with safety whipchecks

• Suits Standard 1″ Graco Pick-up tubes for 55 gallon drums
• Screws onto the bottom of a standard pick up tube to make it longer.
• Includes the 1″ diameter extension and the coupling to make the connection
• Sold as a kit with 2 components
• Genuine Parts – Manufactured by Graco

• Suits 2001, 2001V, 2001SS, and 2100 Series Spray Guns
• Contains all the parts needed for the standard rebuild
• Sold as a Kit
• Genuine Parts – Manufactured by Binks

• Lightweight 5 ft. Long-Reach Chisel Scraper
• Available in different sizes
• Perfect for chipping, scraping and de-scaling
• Strip soft materials
• Remove de-laminated coatings
• Easy reach cleaning
• Scrape heavy rust

• Medium duty cloth tape with natural rubber adhesive backing
• Commonly used to protect against overblast, this tape has many other applications not requiring aggressive adhesive
• Various widths available
• NOTE – this tape has a lower tack adhesive (making it easier to remove) and is most commonly used for overblast protection.  

FREE SAMPLE ROLLS – Try it before you buy!  Chat / call / email us and we’ll get them out for you.

• Suitable for light-duty brushing applications
• Preferred choice for deburring, cleaning and rust removal in bores
• Steel filaments expand as the brush rotates

• Suits the Devilbiss JGA Standard Spray Gun
• Genuine Devilbiss product
• See photo for included components

• Nylon webbed paint strainer for straining coatings prior to spraying
• Reduces blockages in equipment – foreign particles are removed prior to entering pump, hoses, guns, etc
• Pack 12

• Suits Air Motors and other Air operated tools
• Specially formulated to prevent oxidation, rust formulation and excessive wear in air operated motors, pumps or tools
• Designed for industrial use
• Sold Individually – 1 Pint bottle with easy to use cap
• Genuine Parts – Manufactured by Graco

BlastOne has a complete line of fittings.  These are the Union Adapters, and among other things, the swivel end is ideal for connecting to a spray hose.

• Carbon steel (Other materials available).
• 4:1 Safety Factor 

Need a size not listed? Chat or call us – we’re real people and happy to help!

• • Suits Warrior 4000 Air Motor
  • Repair Kit for rebuilding Air Valve
  • Kit Includes
    • Carriage – O-Ring
    • Air Valve – Cup, Plate, Gasket and 2x O-Rings
    • Nylon Ball Check – O-Ring
  • Sold as a Kit
  • Genuine Parts – Manufactured by Graco

• Suits Trelawny TFP200 series Deck Scalers
• Genuine part – manufactured by Trelawny
• Available Configurations:
  • Bare drum
  • 5-tip Tungsten Carbide cutters
  • Star Cutters
  • Beam Cutters
• Sold individually

The GVS / RPB PAPR units redefine what it means to be a powered air purifying respirator with comfort being a priority along with safety.  The 2 versions (PX5 and HX5) are very similar and both offer a long list of features.  A document comparing the PX5 vs the HX5 is under the Documents tab.  Features and benefits are as follows:

• Sleek and modern. Strategically distributes weight through it’s mounting.
• Light weight.  Weighing as little as 2.55 lbs, they are designed to fit comfortably for all-day use.
• Positive Pressure.  Removes the hassle and expense of fit testing and clean-shaven requirements.
• Comfortable.  
  • The PX5 has 3 different air-flow speeds.
  • The HX5 has a single air-flow speed.
• Versatile.  Variety of PX5 filters and cartridges available for various applications including HEPA for particulates, as well as Organic Vapor (OV), Acid Gas (AG), and Multi-Gas.  The HX5 is compatible with the HEPA filter only.
• Safe.   They alarm when the battery is low and when the airflow is blocked.  The PX5 has visual, audible, and vibrating alarms, making them great for high-noise environments.  The HX5 has the visual and audible alarms only.  Both units are designed to prevent use if filter is not installed.
• Flexible.  Available in the following configurations:
  • Battery.  PX5 / HX5 PAPR batteries are available in standard or high capacities.  
  • Mounts.  Available with a standard belt or an optional back-pack mount.
  • Ratings.  Available with an optional FR rating. Offers a spark arrestor insert to protect the filters while welding or grinding.  
• Cleanable.  The PX5 ingress is certified to IP65 (light spray) and can be decontaminated easily.  The HX5 is certified to IP53 (wipe-down ).
• Easy-to-use.  Intuitive LED user interface indicates airflow, fan speed, and battery level.
• Portable.  Without an attached airline (or need for compressed air), these PAPR systems makes it easy to perform your work safely.

Note:  PAPR systems circulate filtered ambient air, and are not compatible with climate control devices or cool tubes.

Additional Note:  Contact us before purchasing if product will be used in an explosive atmosphere.

• Destructive pull-off adhesion test
• Applications include paint or plasma spray on bridge decking, coatings on steel, aluminum, concrete, etc.
• Uses standard test dolly
• Used in accordance with ISO4624, AS1580-408-5 Standards
• Kit supplied with unit body, base support ring, 20 dollies, pack of Araldite adhesive, magnetic dolly clamp, dolly cutter, instructions, carry case

• Ideal for use on small, hot or hard-to-reach surfaces
• Compact – the size of a ball-point pen
• Rugged – unaffected by mechanical shock, acid,  oil, water and dust
• No user adjustment needed
• Wear-resistant probe tip ensures long life and reliable accuracy
• Certificate of calibration showing traceability to PTB included
• Conforms to ASTM D7091/B499, ISO 2808 and others

• Male threads at both ends
• Carbon steel construction
• Optional stainless steel also available
• Various seal material options for fluid compatibility
• Mount on the high-pressure filter outlets for the control of individual spray lines
• Can be used as a priming-drain valve
• Premium PEEK Seals have more than double the life of Teflon

• HFSTC3 blast coupling included
• Designed for use with coarse metallic abrasives
• Heavy cast iron construction
• Not recommended for use with fine abrasives
• 1 1/2″ NPT female thread air connection
• Recommended upgrade: MicroValve 3

From the makers of the Nova Respirators!

• GVS Masks are made from TPE and are hypoallergenic and non-irritating. 
• Extremely lightweight and comfortable. 
• Each mask includes the initial set of filters installed and is ready-to-use.
• Price shown per-each.  Packed 4 per case, with case discount.
• Multiple filter versions available as follows: 
  • OV / P100. Removes Organic Vapors along with P100 filtration. Painters choice!
  • OV / AG / P100. Protects against organic, inorganic, chemical gases, and particulates. 
    • Solvents
    • Chlorine and Chlorine Dioxide
    • Hydrogen Chloride and Hydrogen Fluoride 
    • Sulphur Dioxide 
    • Organic Vapors
  • Multi-Gas. Protects against organic, inorganic, chemical and ammonia based gasses. All acid gases above, plus:
    • Ammonia 
    • Formaldehyde
    • Hydrogen Sulfide
    • Methylamine 
  • Multi-Gas / P100. Protects against organic, inorganic, chemical and ammonia based gases, and particulates. 
  • Keep your respirator fresh with the standard-profile line of GVS replacement filters.
• NIOSH Approved with ANSI Z87+ eye protection
• Goggles are scratch and fog resistant.  Tear-off lenses available separately to keep them clean while spraying.

NOTE – This is the standard-profile series, which has the largest variety of protective filters.  Low-profile Integra Masks (which offer an enhanced field of vision) are also available. 

Your regular eyeglasses will not fit under these goggles.  However, GVS makes an Integra Prescription Lens insert to fit inside, which you can give to your optician to have fitted with your prescription.

As with all close-fitting respirators, these are designed to be used where fit-testing is conducted. The GVS Portacount Adaptor is available to facilitate this testing. 

From the makers of the Nova Respirators!

• GVS Masks are made from TPE and are hypoallergenic and non-irritating.  
• Extremely lightweight and comfortable. 
• Each mask includes the initial set of filters installed and is ready-to-use.
• Price shown per-each.  Packed 5 per case, with case discount.
• Multiple filter versions available as follows: 
  • Standard P100
  • Enhanced P100 w/Nuisance Odor control
  • OV / P100 – P100 Organic Vapor protection.  Painters favorite!
  •  Reuse your respirator by using the low-profile line of GVS replacement filters, which include a pre-filter option which extends the life of the OV / P100 filter.
• NIOSH Approved goggles provide ANSI Z87+ eye protection.  
• Goggles are scratch and fog resistant.  Tear-off lenses available separately to keep them clean while spraying 

NOTE – This is the low-profile series with enhanced field of vision. Standard-profile Integra Masks (which offer Acid Gas & Multi-Gas filter options) are also available. 

Your regular eyeglasses will not fit under these goggles. However, GVS makes an Integra Prescription Lens insert to fit inside, which you can give to your optician to have fitted with your prescription.

As with all close-fitting respirators, these are designed to be used where fit testing is conducted.  The GVS Portacount Adaptor is available to facilitate this testing.  

AVAILABLE FOR RENTAL OR PURCHASE

• 185 cfm Compressor is suitable for a very small blaster or a spray pump
• PSI Range between 100-150psi
• Each compressor brand is different, so please request a quote.

AVAILABLE FOR RENTAL OR PURCHASE

• 900 cfm Compressor is suitable for 2 blasters plus a spray pump
• PSI Range between 125-150psi
• Each compressor brand is different, so please request a quote.

• Replacement part for the RPB T 100 Spray Hood
• Genuine RPB part
• Includes brow pad

The Bullard Air Gladiator (aka breathing air canister filter) is an updated version of the previous 41 series.  It has the same 7-stage filtration as before along with a new handle and mounting options. Additional details as follows:

• Available with 2 or 6 outlets
• Anti-tip base for portable applications
• Built-in handle doubles as a wall-mount bracket for stationary applications

BlastOne BlasterAll Blasting Gloves feature:

• Leather exterior for good abrasion resistance
• ANSI Cut Level 4 Kevlar lining and 7 inch gauntlet provides extra protection for hand and forearm
• Stylish & Comfortable design
• Touch-screen finger tips allows answering mobile devices without removing the gloves
• Extended size selection from X-Small to 2X-Large
• Coordinates with BlastOne BlasterAll Coveralls available here

• Suits Trelawny Single Head Scaler (HT1965095)
• Individual Crucifix Tips for Triple Head Scaler 
• Genuine part – manufactured by Trelawny
• Replacement Hammer
• Sold individually

• Suits the Devilbiss JGA Standard Spray Gun
• Genuine Devilbiss product
• Replacement air cap only

• Suits T100 Spray Hood
• Sold individually

• Suits all Xtreme and Maxlife lowers
• Dump or Bleed Valve Repair Kit
• Valve is mounted on the side of the lower to allow pressure relief from the filter housing
• Kit includes all the replacement parts for the Valve, O-Rings, Gasket, Valve Seat, Carbide Ball and Retaining Ring
• Sold as a Kit
• Genuine Parts – Manufactured by Graco

• Suits 5 Gallon Drum
• Agitator Kit with Pail Cover
• Air Powered 1/4 HP Motor (Air Inlet 1/8″)
• Agitator and Shaft length 13.25 inches
• Carbon Steel Lid with Lift handles for ease of removal
• Includes Locking bolts to secure the lid
• Maximum Speed 800 RPM
• Sold as a Kit
• Genuine Parts – Manufactured by Graco

• Easy installation and removal
• Sturdy construction for long-lasting use
• Compatible with a wide range of spray foam equipment
• Improves filtration efficiency for better results

This package includes the following: 

• 10Q Painting Robot
• Trailer Package to contain pumps and controls
• Graco Plural Sprayer 
  • Mixing at the pump for 2 pack coatings 
  • Can be used with a single pack
• Ventilation unit for the robotic paint head
• Robotic painting head with gun
• Maximum of 150 ft of hose from the trailer to the robot
• Fall arrest 
• $420,000 to $470,000 depending on configuration

Additional components such as heat, power, and accessories, are dependent on the configuration. Contact us to learn more. 

• Replacement Air Nozzle/Air Cap
• Suits Binks Conventional Spray Gun
• Genuine Binks Product

The latest member of our BlasterAll® family of products is our new Rigger gloves.  It’s styled like the original BlasterAll® blasting gloves, but without the extended gauntlet for more convenient every day use. Features include:

• Leather exterior for good abrasion resistance
• Extended cut resistance with Cut Level 5 Kevlar® lining
• Stylish & Comfortable design
• Touch-screen finger tip on index finger
• Extended size selection from X-Small to 2XL-Large